Step 1
Download the Ring app
The Ring app will walk you through setting
up and managing your Stick Up Cam.
The Ring app is available for iPhone, iPad,
Mac Desktop, Android and Windows 10.
Step 2
Meet the back of your Stick Up Cam
Setup Button – You’ll be instructed to push
this during the in-app setup.
Power Port – Plug the orange cable into
this port to charge your Stick Up Cam. If
running off battery, make sure it’s fully
charged before installation.
Status Light – This light will pulse when
your Stick Up Cam is in setup mode.
Setup Button Power Port
Step 3
Perform the in-app setup
Select the plus sign in the Ring app to set
up a new device.
When prompted, select Stick Up Cam.
Step 4
Test the video quality
Before mounting your Stick Up Cam, let’s
run a quick test. Double-press the orange
button. This will send an alert to your
mobile device.
Smile, you’re on camera.
Step 5
Select the mount you’d like to use
You have two mounts to choose from.
There’s the Quick Release Mount and the
Security Mount.
Quick Release
Mount
This mount makes it
easy to take your Stick
Up Cam off the wall for
charging.
Step 6
Remove the swivel arm from the
security mount
A) Loosen the bolt on the side.
B) Remove the bolt completely to set the
swivel arm free, and set this screw aside
for now.
Stick Up Cam
Setup and
Installation Guide
Download from
Windows Store
Search for “Ring” in one of the app stores
above, or visit: ring.com/app
We have an online guide with videos and
tutorials at: ring.com/setup
Security Mount
This mount offers
a more permanent
solution.
Perform the in-app setup inside near
your router. You’ll need your network
2 3 4 5 6 7
name and Wi-Fi password.
Repeat this test outside. If video quality is not as
good, you may need to invest in a Wi-Fi extender.
Learn more at: ring.com/extender
Step 7
Attach the swivel arm to your Stick Up Cam
Use the provided bolt to attach the swivel
arm to any of the three mounting points
on the back of your Stick Up Cam.
Screw the bolt into the side of
the swivel arm that has a recess.
Step 8
Install the mount
Take everything to the location where
you're installing your Stick Up Cam.
If you’re installing on stucco, brick o r
concrete, use the quick release mount as
a template to mark the location of 4 holes
that you’ll drill in the next step.
Quick
Release
Mount
When selecting your mounting location,
factor in the area you want to cover.
Mount your Stick Up Cam lower, and aim it
outwards to cover a longer distance.
8 9 10 11 12 13 14
On stucco, brick or concrete, use the
provided drill bit to drill the 4 holes
that you marked in the previous step.
Then insert the wall anchors.
On wood or siding, skip this part, and
screw the bracket directly onto your wall.
Use the Phillips head side of the Ring
screwdriver and the provided screws to
screw in the mount you selected in Step 5.
Step 9
Attach your Stick Up Cam to the
security mount
Use the bolt you set aside in Step 6 to
attach the camera to the security mount.
Step 10 (if using the quick
release mount)
Snap your Stick Up Cam into the quick
release mount
Push gently down on the tab, and snap
your Stick Up Cam into place.
Double-press the orange button on the back of your
Stick Up Cam to trigger an alert in the Ring app. Use
this to find the best point of view for the camera.
Loading...