2
Install your Ring Doorbell Pro
Step 1
Download the Ring app
The Ring app will walk you through
the setup and installation processes.
The app is available for iOS, Android,
Mac Desktop, and Windows 10.
Download from
Windows Store
Search for “Ring” in one of the app
stores above, or visit: ring.com/app
We have an online guide with videos
and tutorials at: ring.com/setup
22
If you need help, reference the in-app video
There’s a video in the Ring app on the installation process
outlined in this manual. We recommend watching that
first, and referring to this manual if you need extra help.
Select the + sign to Add a New Device (or tap Set Up a
Device), then select Video Doorbell Pro to access this video:
33
Step 2
Say “Hello” to your
Ring Video Doorbell Pro
Mounting
holes
Front
Setup
button
Back
Terminals
Attach your
existing wiring
here.
Use the included
wire-extensions
if necessary.
4 Faceplates
Pick the one that best
matches your home…or
your mood.
Change it any time.
44
Step 3
Check out all the cool stuff
in the box
1 Screwdriver - Use the Phillips end for the
mounting screws and star-shaped end for the
security screw.
3 Anchors - For installing on concrete, stucco, or
brick.
1 Drill Bit - To drill holes for the (optional) anchors.
3 Mounting Screws - Use two to mount your Ring.
2 Security Screws - Use one to secure the
faceplate.
2 Extra Wires - To attach your existing wires to
your Ring.
2 Wire Connectors - To connect the extra wires
(above) to your existing wires.
55
Step 4
Remove your existing doorbell
Remove your existing doorbell from the wall and
disconnect the wires.
6
Step 5
Install anchors
(optional)
On stucco, brick, or
concrete, use the provided
bit to drill two holes in
your wall, and install the
anchors.
If you’re installing on wood
or siding, put the anchors
in that drawer of stuff you
never use and skip this
step.
77
Step 6
Remove the
Faceplate
Remove the faceplate on
your Ring Doorbell Pro to
access the mounting holes.
After your Ring Doorbell is installed,
remove the faceplate like this:
88
Step 7
Connect your Ring to your existing wires
Connect your Ring Doorbell to your existing doorbell
wiring. Then feed the wiring into your wall, and screw
in your Ring Doorbell.
The wire clips and extra
wires are optional.
Use them if you can’t
connect your wires directly
to the screw terminals.
It doesn’t matter which wire connects to which screw.
9
Step 8
Restore power at the breaker
The hard part is over–congrats! After restoring power at
the breaker, open the Ring app, select the option to Set
Up a New Device, and follow the in-app instructions.
10
Loading...