Ring Floodlight Cam User Manual

Floodlight Cam
Smart Security at Every Corner of Your Home
Your new Ring Floodlight Cam lets you extend the Ring of Security around your entire property.
Now, you’ll always be the first to know when someone’s in your yard, and you can watch over your home from anywhere.
Monitor your home, prevent crime and protect your property – all from your phone, tablet or PC.
This manual is for informational purposes only. Working with electricity can be dangerous unless proper safety precautions are taken. If you are not comfortable or are inexperienced with the processes and tools described in this manual, we recommend that you hire a licensed electrician.
If you are outside of North America, installation and wiring must be performed by a licensed electrician.
32
Before you begin
Check out all the stuff in the box.
These instructions assume you’re replacing an existing floodlight and/or have a junction box where Floodlight Cam can be mounted. If you don’t have a junction box, then you’ll need to hire an electrician to install one.
Screwdriver
Use the screwdriver handle to tighten the cap nuts.
Phillips Bit
Use the Phillips bit for installing the mounting bracket.
Mounting Bracket
Use this bracket to attach to your junction box to secure your Floodlight Cam.
Bag o’ Screws
Find the right ones to attach the mounting bracket to your junction box without running to the hardware store.
Wire Nuts (3)
Use these to connect Floodlight Cam’s wires to your existing wires.
Screw Cap Nuts (3)
Use these to secure your Floodlight Cam to the posts on the mounting bracket to complete the installation.
Hook
Hang your Floodlight Cam while connecting the wires.
54
How it all fits together
Junction Box (not included)
Mounting Bracket
Bracket Screws
Light Lock Collar
Mounting Posts
Wire Nuts
Light Adjustment Knob
Motion Detector (for lights)
Camera Lock Collar
Screw Cap Nuts
76
How installation height affects motion detection
Parallel to ground
When mounted at 9 feet off the ground, with the motion detector parallel to the ground, the motion sensor is optimized to detect human-sized objects at up to 30 feet.
9 feet
(3 Meters)
8 9
30 feet (10 Meters)
Shut power off at the breaker
If you don’t know where your breaker is or how to turn off power to your floodlight circuit, consult with a licensed electrician.
WARNING: Risk of electrical shock
• Disconnect power at the fuse or circuit breaker before installing.
• Verify that the supply voltage is correct. Connect fixture to a 100 VAC~240 VAC 50/60 Hz power source.
• Properly ground fixture.
• Always follow code standards when installing wired connections.
• If you are outside of North America, installation and wiring must be performed by a licensed electrician.
CAUTION: Risk of fire
• Do not install near combustible or flamable surfaces.
NOTICE
• Do not connect this light fixture to a dimmer switch or timer.
• Floodlight Cam must be installed on a wall and on a UL listed junction box.
1110
Prep your Floodlight Cam for installation
A
Loosen the knobs on the light
fixtures to rotate them out of the way and allow access to the mounting screws.
Do not remove your Floodlight Cam from the ball socket on the base.
B
Rotate the camera 180
degrees since Floodlight Cam ships with the camera upside down on the fixture.
1312
Remove your existing floodlight
A
With power off at the
breaker, remove your existing
floodlight from the junction box it’s attached to and disconnect the wires.
B
If there is a bracket attached
to your junction box, remove that as well.
Inspect your junction box to make sure water cannot get into it.
Floodlight Cam must be installed on a UL listed junction box. If you don’t have an existing junction box, you’ll need to hire a licensed electrician to install one. Also, be sure to comply with your local building codes.
A
B
1514
Install the mounting bracket
Install the mounting bracket on your wall with the two posts level with the ground.
Make sure your existing wires come through the middle of the bracket.
Attach the bracket to your junction box using at least two screws.
1716
Hang Floodlight Cam
Use the provided hook to hang Floodlight Cam from the bracket while connecting the wires.
A
Hook one end of the provided
hook into one of the mounting holes on your Floodlight Cam.
B
Hook the other end into one
of the holes in the bracket.
1918
Connect the ground wire
The copper wire from Floodlight Cam is a ground.
Connect the ground wire to the green ground screw on the bracket and the existing ground wire inside your junction box.
Use one of the supplied wire nuts if necessary.
For safety and the proper operation of your Ring Floodlight Cam, the fixture must be properly grounded. If you’re not familiar with the methods for properly grounding this type of fixture, consult a licensed electrician.
2120
Connect the power wires
The white wire on Floodlight Cam is a neutral wire. Use a wire nut to connect this wire to the white (or neutral) wire coming out of your junction box.
The black wire from Floodlight Cam is a hot wire. Connect this wire to the black (or hot) wire coming out of your junction box using another wire nut.
If you don’t have clearly colored black and white wires coming out of your junction box, consult with a licensed electrician.
2322
Place Floodlight Cam on the bracket
Carefully push all the wires through the large opening in the bracket.
Align the mounting posts with the holes on Floodlight Cam and press together, securing the screw cap nuts with the orange screwdriver handle.
2524
Restore power at the breaker
Perform the in-app setup
After restoring power, the lights will turn on and your Floodlight Cam will begin speaking to you to let you know it’s in setup mode.
26 27
In the Ring app, select Set Up a Device and follow the in-app instructions to connect Floodlight Cam to your Wi-Fi network.
After setup, select your Floodlight Cam in the Ring app
Manually control the lights.
This will bring you to the Device Dashboard, where you can change settings and access various features.
Toggle notifications for activity in any of the camera’s motion zones.
Trigger the siren. It is loud and may be heard by your neighbors. Use it with care.
2928
Select Live View to open a live video stream
During live video, you can access these features:
Two-way Talk – Speak to visitors and hear what they have to say.
Siren – Activate the siren.
Lights – Turn the lights on and o.
Ring Neighborhoods – Share
suspicious events with your neighbors.
3130
Select Motion Settings
to customize your motion preferences
Allows you to adjust the amount of alerts you receive. Choose People Only to get motion alerts from humans only.
Draw up to three custom areas where you’d like to receive motion alerts and trigger the lights.
Schedule times when you don’t want to receive motion alerts.
3332
To detect motion, you will need to set up Motion Zones, which is a customizable area you want your Ring to monitor and receive alerts.
To set up a Motion Zone, select Motion Settings. On this screen, create up to three Motion Zones. You will need at least one Motion Zone to be active to get alerts.
If your phone is locked when the camera captures a live event, you will receive a notification on your home screen.
If your phone has a passcode, you’ll need to enter it to access the live event.
3534
Select Light Settings
to set a schedule for your lights to stay on
Select Advanced Settings on the Light Settings screen to customize the areas that will trigger the lights and change how long they stay on for.
3736
Troubleshooting Tips
My lights aren’t turning on when Floodlight Cam detects motion.
The lights only turn on for motion when it’s dark outside. If it is dark out and the lights still aren’t turning on, adjust the motion settings for the lights by selecting Light Settings in the Ring app, and then selecting Advanced Settings.
I’m having issues with video/audio quality and/or load times.
Issues with video and/or audio are usually related to problems with Wi-Fi signal strength or Internet speed. For an optimal experience, we recommend Internet speeds of at least 1–2Mbps. Check your Internet speed by selecting Device Health in the Ring app, then selecting Test Your Wi-Fi.
If your Internet speed is sufficient, then look at Signal Strength in Device Health. If Signal Strength is not Good, you’ll need to boost the Wi-Fi signal to your Floodlight Cam, which can be done with our product, Chime Pro.
Floodlight Cam is not lighting up when I restore power.
See if there is a light switch controlling power to your floodlight fixture. If so, make sure it is switched on and stays switched on. If your fixture is connected to a timer, you’ll need to turn off the timer functionality.
Floodlight Cam lights up, but I can’t complete the in-app setup.
First, double check your Wi-Fi password, since this is the most common reason Floodlight Cam can’t complete setup.
Second, check the distance to your Wi-Fi router or access point. Installing Floodlight Cam too far from your access point may prevent setup from completing. In this case the installation of a Ring Chime Pro can help boost your Wi-Fi signal and provide audible alerts from your Floodlight Cam and other Ring products.
Learn more about Chime Pro by visiting: ring.com/chime-pro
3938
For additional help, visit: ring.com/help
Or give us a call…
US 1 800 656 1918
UK 01727 263045
AU 1 300 205 983
NZ +64 9 887 9871
Mexico (D.F) 52 55 8526 5445
Worldwide +1 310 929 7085
For a list of all our customer support numbers, visit:
ring.com/callus
To review your warranty coverage, please visit www.ring.com/warranty.
Patents: www.ring.com/patents
© 2019 Ring LLC or its affiliates.
Ring, Always Home, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Last updated: 03/01/19
2520AG650L-A05FX
Loading...