02_Beams_Bridge_MANUAL.indd 1 9/21/18 11:22 AM
83.5mm
Tolerence: -1/+1 mm
RIN-MN00001-AP
USER MANUAL RING BEAMS BRIDGE ENGLISH V1.0
REV: 1.1
TOTAL PAGES: 5
DATE: 26-Nov-2018
APPROVE BY: GIL S. TALANGAN
83.5mm
Beams Bridge
Ring Ring-18042
105g C2S
Dylan
How to set up your Ring
Download from
Windows Store
Beams Bridge
Download the Ring app.
The app walks you through setting
up and managing your Bridge.
Search for “Ring” in one of the app
stores below, or visit: ring.com/app
Grab your Wi-Fi password.
You’ll need it to set up your Bridge. Write it down here so it’s handy
when you need it:
Choose a good location.
For the best wireless range, place
your Bridge near the front of your
home, ideally near a window.
Once you’ve decided on a good
spot, plug the provided power
supply into an outlet, and connect
it to your Bridge with the included
USB cable.
02_Beams_Bridge_MANUAL.indd 2-3 9/21/18 11:22 AM
Set up your Bridge in the Ring app.
Beams
Alarm
Doorbells
Security Cams
Chimes
In the app, tap Set Up a Device.
When prompted, select Beams and
follow the in-app instructions.
Set up your Ring Beams lights.
Since you have a Ring Beams
Bridge, you may have one or more
Ring Beams lights. Now that your
Bridge is set up, it’s time to set up
your lights.
To get started, tap Set Up a
Device, select Beams, and follow
the instructions in the app or the
included manuals.
02_Beams_Bridge_MANUAL.indd 4-5 9/21/18 11:22 AM
Need a little help with setup?
If your in-app setup doesn’t go as
planned, try these tips:
Get your Wi-Fi password just right.
The most common setup issues
come from entering the wrong
Wi-Fi password. These passwords
are case-sensitive, and every little
error counts.
02_Beams_Bridge_MANUAL.indd 6-7 9/21/18 11:22 AM
Reboot your router.
If you entered the right password
but you’re having no luck, try
turning your Wi-FI router off, wait 30
seconds, then turn it back on.
Then, begin setup again in the Ring
app.
For additional help, visit: ring.com/help
Or give us a call…
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide +1 310 929 7085
For a list of all our customer support
numbers, visit: ring.com/callus
To review your warranty coverage, please visit www.ring.com/warranty.
Patents: www.ring.com/patents
© 2018 Ring LLC or its affiliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
Last updated: 09/21/18
02_Beams_Bridge_MANUAL.indd 8 9/21/18 11:22 AM
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
·If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
IC:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
IC RF Exposure statement
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour
un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un min
Loading...