Alarm Kit
Security Basics
Welcome ...................................................................................................................................2
What is monitoring? ...........................................................................................................4
Permits ........................................................................................................................................6
Practice Mode ........................................................................................................................7
Modes, How to arm & disarm on the Keypad ..................................................8
Bypass ......................................................................................................................................10
Entry/Exit Delay .................................................................................................................. 11
Including sensors in Modes ......................................................................................12
Entry Delay settings ........................................................................................................ 13
Where to place your devices ....................................................................................14
Ring Contact Sensor .......................................................................................1 4
Ring Motion Detector.....................................................................................16
Ring Keypad .........................................................................................................17
Ring Range Extender, Ring Base Station ...........................................18
Preventing false alarms ................................................................................................19
When something goes wrong .................................................................................20
Emergency contacts ......................................................................................................21
Verbal password ...............................................................................................................22
Panic ....................................................................................................................................... 23
Users ....................................................................................................................................... 24
Notifications ......................................................................................................................... 25
FAQs ....................................................................................................................................... 26
Family exit plans ................................................................................................................28
32
Welcome to
Ring Alarm.
Table of contents
54
What is Professional Monitoring?
Professional security monitoring monitors your home and alerts authorities in the event of an
emergency. To enable professional monitoring for Ring Alarm, subscribe to Ring Protect Plus
at ring.com/protect-plans.
Professional monitoring consists of two systems working together:
The Alarm System
This is your Ring Alarm system. The Ring Alarm
Base Station is always watching the sensors in
your home to see if something is wrong. If one
of the sensors reports that something is wrong
while the system is armed (see page 8), the Base
Station alarm begins sounding, and an alarm
signal is sent to the central monitoring station.
The Central Monitoring Station
This is a team of people who watch over homes
with Ring Alarm systems. When your Base Station
sends an alarm signal, a support agent calls you
to see if everything is OK. If there’s an emergency,
they can dispatch authorities to come check on
you and your home.
Sensors: Faulted or Cleared
The sensors in your Ring Alarm kit are always
in one of two states. Contact Sensors can be
opened or closed. Motion Detectors can be
detecting motion or not detecting motion.
If we’re talking about a single type of sensor, we’ll
say that it’s in one of those states. But if we’re
talking about multiple types of sensors, we use
the terms “faulted” and “cleared.” A faulted sensor
is one that will set off the alarm if your system is
armed. A cleared sensor indicates that all is well.
If a Contact Sensor is open or a Motion Detector
is detecting motion, they are faulted. If the
Contact Sensor is closed or a Motion Detector is
not detecting motion, they are cleared.
Faulted Sensors
are shown in red.
Cleared Sensors
are shown in blue.
76
Permits
When you sign up for professional monitoring
with Ring Alarm, you may need to obtain a
permit for your system. Permit requirements
vary depending on where you live and
generally fall into one of the three categories:
You obtain the permit
In this case, you need to apply for a permit
yourself. We’ll email you the names of the
agencies to contact, and a link to your permit
application and the alarm ordinance (if
available) if a permit is required at the time
you set up your Alarm system.
Ring obtains the permit
In this case, Ring submits the first permit
application for you. We’ll email you with
details about permit costs and any details we
need to confirm. Once we have received your
information and permit fee, we’ll guide you
through the rest of the process.
Permit not required
In this case, no permit is required at the time
you set up your Alarm system. We’ll email
you to let you know that no further action is
needed on your part.
We’re working hard to make sure you always have
the most current information about your local
permit requirements, but please be aware that
local jurisdictions change their ordinances and
applications frequently. It is always best to reach
out to your local police department directly to
ensure you have the most current information.
Once you have your permits...
Be sure to add your permit numbers and
expiration dates to your account in the Ring App.
Until you do, emergency responders may not
be dispatched to your home in the event of an
emergency.
To do this:
1. Open the side menu in the
Ring app.
2. Tap Location Settings.
3. Tap Monitoring.
4. Tap Permits.
5. Tap the permit type you
want to enter.
6. Enter your permit number
and expiration date in
the provided fields. When
you’re finished, tap Save.
Practice ModePractice Mode
When you sign up for professional security
monitoring through Ring Alarm, you’ll be placed
in a seven-day Practice Mode. While you’re in
Practice Mode, your system works normally, but
emergency responders are not dispatched to
you if an alarm occurs. This gives you time to
make sure your system is working well before it
becomes fully active.
You’ll also want to obtain your alarm permits (and
add them to your account) before the practice
period ends.
Here are a few things you should test during
Practice Mode:
• Do your sensors become faulted at the
right times? If a sensor is incorrectly installed
or set to detect too little motion, your system
may not work properly.
• Can the sensors talk to the Base Station?
If your sensors are too far from your Base
Station, they won’t be able to report if anything
is wrong.
• Does your Base Station sound its alarm when a
sensor becomes faulted? For example, If your
Ring Alarm is set to Away or Home and a door
opens, does the alarm sound (or go into
Entry Delay)?
By the end of your practice period, you want to
be confident that your system functions properly.
(Ring Protect Plus subscribers only) (Ring Protect Plus subscribers only)
98
Security Modes
Away Mode
All sensors in your home are
monitored. This is useful when
you’re going out and want to
be notified if anything happens
to your home.
Home Mode
All exterior and perimeter
sensors are monitored,
but interior sensors are not
monitored. This is useful if
you’re at home but want to be
alerted if anyone tries to break
in through a door or window.
Disarmed Mode
No sensors in your home are
monitored. This is useful when
you’re at home and want the
freedom to go in and out
easily.
How to Arm & Disarm using the
Keypad
When Ring Alarm is set to Away or Home, your
system is “armed.” When Ring Alarm is set to
Disarmed, your system is “disarmed.”
To arm your system via the Keypad, simply enter
your access code, and then press the Away or
Home Mode button.
To disarm your system with the Keypad, simply
enter your access code, and then press the
Disarmed Mode button.
You can also arm and disarm your system in the
Ring app by tapping the mode of your choice.
Your Ring Alarm can be set to one of three security modes: Away, Home, and Disarmed.
1110
Sensor Bypass Entry/Exit Delay
When Ring Alarm is in Away or Home Mode,
it’s monitoring your home for security issues.
If a monitored sensor becomes faulted while
your system is in Away or Home Mode, the alarm
begins to sound.
When you switch to Away or Home Mode, your
system quickly checks for any faulted sensors.
You won’t be able to switch to an armed mode
until you clear the faulted sensor or bypass it.
Bypassing lets you arm Ring Alarm when a sensor
is in an insecure state. For example, bypassing
would let you put your system into Home Mode
with a window left open, to catch a breeze. Once
you bypass that window sensor, Ring Alarm
becomes armed, but doesn’t monitor that sensor.
When you enter an armed mode, you can bypass
any faulted sensors using the Ring app, or by
pressing the “” button on the Keypad.
Bypassing temporarily weakens your ring of
security, but it can be useful in some situations.
Entry Delay and Exit Delay are countdowns that allow you to enter and leave your home easily without
causing the alarm to sound.
Exit Delay
Exit Delay allows you to leave your home once
you’ve armed Ring Alarm. When you place
Ring Alarm into Away or Home Mode, it makes a
series of chirps to let you know that it is preparing
to arm. Once the Exit Delay period ends, Ring
Alarm is armed.
Give yourself enough time to exit your home
before the countdown ends. You can set the
countdown as short as 30 seconds or as long as
two minutes.
Entry Delay
Entry Delay allows you to enter your home and
disarm your system while Ring Alarm is in Away
Mode. When you enter your home while Ring
Alarm is in Away Mode, your Base Station and
Keypad makes a series of chirps to let you know
that you have a short time until your alarm goes
off. When you hear this, you should disarm your
system as soon as possible. You can set the
countdown as short as 30sec or as long as 2min.
1312
Including sensors in Modes Entry Delay settings
Each Ring Alarm security mode monitors specific
groups of sensors. By default, Away monitors all
sensors and Home monitors only exterior and
perimeter sensors. However, you can customize
which sensors are monitored in each mode. If
you want to monitor an interior sensor during
Home Mode, you can adjust this using the Modes
Settings.
To choose which sensors are monitored
in a mode:
1. Open the menu.
2. Tap Location Settings.
3. Tap Modes.
4. Tap the specific mode you’d like to edit.
5. Under “Monitored In This Mode,” tap Sensors.
6. Tap a sensor to toggle it between monitored
or not monitored.
Ring Alarm includes an Entry Delay setting
so you can enter your home and disarm
the system before the alarm sounds. This is
a setting on each mode that applies to the
entire system.
Perimeter sensors (such as Contact Sensors)
default to Set Delay mode, but can be set to
No Delay, if desired.
Motion Detectors default to Auto Delay mode,
but can be set to Set Delay or No Delay, if
desired.
No Delay is useful if you have a Motion
Detector monitoring a door or window and
want the alarm to sound instantly if motion is
detected in Home Mode.
To change the Entry Delay settings for a sensor:
1. In the Device List, tap the sensor that you want
to change.
2. Tap Location Settings.
3. Tap the mode you’d like to change.
4. Make sure that the sensor is included in the
mode.
5. Choose the delay that you want for the sensor.
• Set Delay follows the delay time specified in
the settings for the current mode.
• No Delay allows no time for Entry Delay.
If the sensor is faulted, the alarm sounds.
• Auto Delay is a special mode just for Motion
Detectors. If the Motion Detector is the first
to be faulted, the alarm sounds immediately.
If another sensor is faulted first, that sensor’s
Entry Delay setting remains in effect.
1514
Where to place your devices
Ring Base Station
The Ring Base Station communicates with all
your Ring Alarm devices and with the central
monitoring station. The Base Station works best
when it’s in a central location in your home.
This allows it to easily communicate with your
devices and ensures that the siren can be heard
by everyone.
To install your Ring Base Station:
1. Find an outlet in a central location in your
home.
2. Plug your Base Station into the outlet.
If you find that the Base Station is having trouble
communicating with a distant Ring Alarm device,
you can add a Range Extender to bridge that
gap.
Ring Range Extender
Ring Range Extenders expand your Ring
Alarm network and make sure your devices are
communicating well with the Base Station. The
extender works best when it’s strengthening
the communication with a device that’s far
from your Base Station.
To install your Ring Range Extender:
1. Plug the extender into an outlet between
your Base Station and device.
Ring Motion Detector
Ring Motion Detectors can be installed flat on
a wall, or in a corner. A Motion Detector should
ideally be placed around 7’ above the floor, and it
needs an unobstructed view of the area you want
to cover. Ideally, it should monitor a high-traffic
area that an intruder would be likely to cross.
If possible, avoid pointing the Motion Detector
at a heat source such as a stove, fireplace, or
windows that get direct sun.
Anything that moves in a room with a Motion
Detector may trigger an alarm if the system is in
Away Mode. Here are a few common household
items that can trigger your Motion Detector.
• Unsupervised pets
• Balloons
• Curtains, banners, or plants caught in a draft
• Stacked Items that have the potential to fall
To install the Ring Motion Detector:
1. Remove the bracket from the back of the
detector.
2. Mount the bracket using the included tape
or screws.
3. Place the sensor onto its bracket. It should
snap into place.
1716
Once you’ve installed your sensors, it’s good to
give them a descriptive name. In an emergency,
the name you choose may be sent to emergency
responders so they know the location where the
alarm signal was activated.
• Over time doors and windows can warp
causing a misalignment of the sensors, which
can activate the alarm.
• Make sure that every door and window where
you have a Ring Contact Sensor installed is
closed before you arm your system.
Ring Contact Sensor
Ring Contact Sensors can be installed on any
door or a window. They need to be perfectly
aligned and no more than 1/4” apart when the
door or window is closed. It doesn’t matter what
direction you install them or whether the sensor
or magnet goes on the trim.
To install the Contact Sensor:
1. Remove the brackets from the back of the
sensor and magnet.
2. Mount the brackets using the included tape
or screws.
3. Place the sensor and magnet onto their
brackets. They should snap into place.
Preventing false alarms
What is a false alarm?
A “false alarm” is when an alarm system goes
into an emergency state when no emergency is
occurring. If your system is self-monitored, this
is annoying, but generally harmless.
However, If your system is professionally
monitored, a false alarm can cause an
emergency signal to be sent to the monitoring
station. This could result in an unnecessary
dispatch request being sent to your Police or
Fire Department.
False alarms can divert emergency responders
from true emergencies and often result in the
owner of the alarm system paying a fine.
It’s important to make sure that you understand
and implement some simple steps to help you
reduce or eliminate the chance of a false alarm.
Some suggestions to reduce false alarms
• Make sure that you and others who will use
Ring Alarm are fully trained on how to use the
system and have access to a disarm passcode.
This includes anyone who has a key to your
house and is allowed to be there when you
aren’t home.
• If someone has access to your home, you can
give them a personal access code. Personal
access codes allow you to keep track of who is
using your system.
• If you need to change the batteries in any of
your Contact Sensors or Motion Detectors,
disarm Ring Alarm before replacing them.
• Be sure that your doors and windows close
tightly. Adjust any hinges and strike plates so
that the door moves no more than ¼ inch
when pushed.
1918
Ring Keypad
Ring Keypads can be mounted flush on a wall or propped up on a table using the reversible bracket.
The Keypad is usually placed near a door or in the hallway, although some people prefer to place it in
their bedroom.
2
3
5
6
8
9
0
4
7
X
To install the Ring Keypad on a wall:
1. Slide the bracket off the Keypad.
2. Place the mounting bracket on the wall,
then use the wall anchors from your kit
to fasten the bracket to the wall. You may
need to pre-drill holes for the anchors.
3. Slide the Keypad onto the bracket.
To install the Ring Keypad on a table:
1. Slide the bracket off the Keypad.
2. Flip the bracket over, then slide it
back onto the Keypad.
When something goes wrong
When something goes wrong and your Alarm begins to sound,
a few things occur:
1. The central monitoring station calls you.
If they can’t reach you, they call your
emergency contact.
2. The central monitoring station asks you for
your verbal security password. If you provide
the wrong password, they dispatch the
authorities.
3. The central monitoring station asks you
if everything is OK, or if you want to have
emergency responders dispatched to
your home.
4. Emergency responders arrive at your home.
When they arrive, they make sure you and
your family are OK, and then check the
premises. Emergency responders always
check the premises before leaving.
Emergency contacts
If you’re not available when an alarm occurs,
the central monitoring station calls your
emergency contact. This person can be a family
member, friend, or neighbor whom you trust to
act responsibly in your stead if an emergency
occurs.
If an emergency happens, the monitoring
station calls you to see if things are OK. You
should add the monitoring station phone
number (shown below) to your contacts so
you’ll recognize it when they call.
When you’re choosing your emergency contact,
make sure they are willing and able to do the
following things:
• They must answer the phone and provide your
verbal passcode.
• They must be available to go to your address
within 60 minutes if requested by the Police or
Fire Department.
• They must have a key or be otherwise able to
give the Police or Fire Department access to
your home.
• They must be knowledgeable about how
to operate and disarm your alarm system
if directed to do so by the Police or Fire
Department.
Add our monitoring center to your contacts:
833-209-2159
(Ring Protect Plus subscribers only) (Ring Protect Plus subscribers only)
2120
Verbal Security Password
(Ring Protect Plus subscribers only)
When the central monitoring station calls you or
your emergency contact, they ask for the verbal
security password. This is a single word that
affirms that you are authorized to make decisions
for your home’s security.
Everyone who is authorized to be in your home
and use your alarm system should know the
verbal passcode. If you or anyone else need
to cancel an alarm, Ring will need your verbal
passcode.
Panic
Ring Alarm features a panic mode. To trigger it,
press and hold the “” and “X” buttons on the
Keypad simultaneously.
If your system is self-monitored, the alarm sounds
in your Base Station and Keypad.
If your system is professionally monitored,
triggering the panic alarm sends a signal to the
monitoring station.
The causes the alarm to sound and police to be
dispatched.
2322
Users & Roles
A User is someone with access to Ring devices at a Location. Each user has a role, which determines
how much access they have to Ring devices and features. There are two roles: Owner and Shared User.
Owner
The owner of the system has full control. They can
control all devices, view video from all Cameras
and Doorbells, receive and control notifications,
create and manage Shared Users, and change all
system settings.
Shared User
Shared Users have access to the system but
don’t have full control. They can control and view
video from the Cameras and Doorbells they have
access to, receive and control notifications, and
use their personal access code on Keypads.
Notifications
Your Ring Alarm system can notify you when a
device goes offline, when the alarm begins to
sound, and a variety of other events.
To adjust which events you’re notified for:
1. Open the side menu, then tap Settings.
2. Tap Alerts.
3. Tap to toggle notifications on and off for
the alert types of your choice.
2524
FAQs
My door/window trim makes it
hard to place my Ring Contact
Sensor. Can I adjust the sensor
so it fits?
Yes. The Contact Sensor can be mounted in
any direction. For the sensor to work properly,
the lines on the sensor and magnet must be
aligned and the sensor and magnet must be no
more than 1/2” apart. If your molding is angled,
the Contact Sensor can still work while tilted.
Be sure to verify that the sensor works properly
once you’ve installed it on molding.
How should I test my system
during Practice Mode?
(Ring Protect Plus subscribers only)
You should test your sensors and make sure you
can arm and disarm your system. Make sure that
the sensors become faulted appropriately and
only report when something is wrong. Try arming
and disarming your system on the Keypad and
the Ring app. When the system is armed, fault a
sensor and let the alarm sound. During the 7-day
Practice Mode, when you set off your alarm, the
monitoring station does not call you or dispatch
emergency responders. This makes Practice
Mode a great time to learn about what happens
when your system alarms. Once your Professional
Monitoring is activated, they will reach out to you
and dispatch emergency responders if they
are needed.
How long does it take for the
monitoring station to call me
after an alarm happens?
(Ring Protect Plus subscribers only)
The monitoring station calls you once the alarm
has been active for thirty seconds. If you disarm
the system before the alarm is active for thirty
seconds, the monitoring station does not call you
or dispatch emergency responders.
Also, entry delay affects this window. If a mode
has a thirty second entry delay, Ring Alarm waits
thirty seconds before sounding its alarm, and
the monitoring station waits an additional thirty
seconds before calling you.
Does the central monitoring
station have access to my Ring
cameras?
No. They only receive information about your
Ring Alarm.
What happens if an alarm
occurs when my power is out?
Ring Alarm includes battery and cellular backup
for this reason. If the power goes out, your Base
Station remains powered for up to 24 hours and
continues to monitor your sensors. If your system
is professionally monitored, and an alarm occurs
when internet is down, cellular backup sends the
signal to the monitoring center.
2726
Family exit plan
When an emergency occurs, your first
responsibility is to make sure your family is safe.
One important part of this is to implement a
family exit plan. Your family needs to know what
to do if something happens.
A good family exit plan should cover the
following information:
• How to leave the home
• Where to meet once you’ve left the home
• If you’re not at home, how to contact with
each other
• Who should be notified next
28
To review your warranty coverage, please visit
www.ring.com/warranty.
Patents:
www.ring.com/patent
s
© 2018 Ring LLC or its affiliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
Last updated: 06/05/18
Got a question we didn’t answer?
Check out our help center at ring.com/help for
answers, videos, user manuals, and more.
Loading...