RIGOL RIGOL RP1050D User guide
User Guide
RP1000D Series High Voltage
Differential Probe
Apr. 2021
RIGOL TECHNOLOGIES. CO., LTD.
RIGOL
Guaranty and Declaration
Copyright
© 2021 RIGOL TECHNOLOGIES CO., LTD. All Rights Reserved.
Trademark Information
RIGOL® is the trademark of RIGOL TECHNOLOGIES CO., LTD.
Publication Number
UGE18108-1110
Notices
RIGOL products are covered by P.R.C. and foreign patents,
issued and pending.
RIGOL reserves the right to modify or change parts of or all
the specifications and pricing policies at the company’s sole
decision.
Information in this publication replaces all previously released
materials.
Information in this publication is subject to change without
notice.
RIGOL shall not be liable for either incidental or consequential
losses in connection with the furnishing, use, or performance of
this manual, as well as any information contained.
Any part of this document is forbidden to be copied,
photocopied, or rearranged without prior written approval of
RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and
industrial standards in China as well as the ISO9001:2015 standard
and the ISO14001:2015 standard. Other international standard
conformance certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or
this manual, please contact RIGOL.
E-mail: service@rigol.com
Website: www.rigol.com
RP1000D User Guide I
RIGOL
General Safety Summary
Please review the following safety precautions carefully before
putting the instrument into operation so as to avoid any personal
injury or damage to the instrument and any product connected to it.
To prevent potential hazards, please follow the instructions specified
in this manual to use the instrument properly.
Ground the Instrument.
The instrument is grounded through the Protective Earth lead of the
power cord. To avoid electric shock, connect the earth terminal of
the power cord to the Protective Earth terminal before connecting
any input or output terminals.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the
instrument and check your manual for more information about
ratings before connecting the instrument.
Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is
powered on.
Do Not Operate with Suspected Failures.
If you suspect that any damage may occur to the instrument, have it
inspected by RIGOL authorized personnel before further
operations. Any maintenance, adjustment or replacement especially
II RP1000D User Guide
RIGOL
to circuits or accessories must be performed by RIGOL authorized
personnel.
Provide Adequate Ventilation.
Inadequate ventilation may cause increasing of temperature or
damages to the device. So please keep well ventilated and inspect
the intake and fan regularly.
Do Not Operate in Wet Conditions.
To avoid short circuit inside the instrument or electric shock, never
operate the instrument in a humid environment.
Do Not Operate in an Explosive Atmosphere.
To avoid personal injuries or damage to the instrument, never
operate the instrument in an explosive atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid dust or moisture from affecting the performance of the
instrument, keep the surfaces of the instrument clean and dry.
Prevent Electrostatic Impact.
Operate the instrument in an electrostatic discharge protective
environment to avoid damage induced by static discharges. Always
ground both the internal and external conductors of cables to
release static before making connections.
RP1000D User Guide III
RIGOL
death.
product or loss of important data.
It calls attention to an operation, if not correctly
immediately.
It calls attention to an operation, if not correctly
performed, could result in potential injury or hazard.
It calls attention to an operation, if not correctly
other devices connected to the product.
Double
Hazardous
Safety
Protective
Chassis
Test
Safety Terms and Symbols
Safety Notices in this Manual:
WARNING
Indicates a potentially hazardous situation or practice
which, if not avoided, will result in serious injury or
CAUTION
Indicates a potentially hazardous situation or practice
which, if not avoided, could result in damage to the
Safety Terms on the Product:
DANGER
performed, could result in injury or hazard
WARNING
CAUTION
performed, could result in damage to the product or
Safety Symbols on the Product:
Insulation
Voltage
Warning
Earth
Terminal
Ground
IV RP1000D User Guide
Ground
RIGOL
Contents
Guaranty and Declaration .................................................. I
General Safety Summary .................................................. II
Safety Terms and Symbols .............................................. IV
RP1000D Overview ........................................................... 1
Basic Operations ............................................................... 5
Cleaning and General Care ................................................ 7
Warranty ........................................................................... 7
Specifications .................................................................... 8
Technical Specifications ..................................................... 8
Operation Environment .................................................... 11
General Specifications ...................................................... 11
Accessories ...................................................................... 12
RP1000D User Guide V
Loading...