User Guide
PVA7000 Series Active Probe
Jan. 2022
RIGOL TECHNOLOGIES CO., LTD.
RIGOL
I
Guaranty and Declaration
Copyright
© 2022 RIGOL TECHNOLOGIES CO., LT D . All Rights Reserved.
Trademark Information
RIGOL® is the trademark of RIGOL.
Publication Number
UGE31102-1110
Notices
RIGOL products are covered by P.R.C. and foreign patents, issued and
pending.
RIGOL reserves the right to modify or change parts of or all the
specifications and pricing policies at the company’s sole decision.
Information in this publication replaces all previously released materials.
Information in this publication is subject to change without notice.
RIGOL shall not be liable for either incidental or consequential losses in
connection with the furnishing, use, or performance of this manual, as well
as any information contained.
Any part of this document is forbidden to be copied, photocopied, or
rearranged without prior written approval of RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and industrial
standards in China as well as the ISO9001:2015 standard and the
ISO14001:2015 standard. Other international standard conformance
certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or this
manual, please contact RIGOL.
E-mail: service@rigol.com
Website: www.rigol.com
User Guide for PVA7000 Series Active Probe
RIGOL
Te rm ina l
Safety Notices and Symbols
Safety Notices in this Manual:
WARNING
Indicates a potentially hazardous situation or practice which, if not
avoided, will result in serious injury or death.
CAUTION
Indicates a potentially hazardous situation or practice which, if not
avoided, could result in damage to the product or loss of important
data.
Safety Terms on the Product:
DANGER It calls attention to an operation, if not correctly performed,
could result in injury or hazard immediately.
WARNING It calls attention to an operation, if not correctly performed,
could result in potential injury or hazard.
CAUTION It calls attention to an operation, if not correctly performed,
could result in damage to the product or other devices
connected to the product.
Safety Symbols on the Product:
Hazardous
Voltage
II User Guide for PVA7000 Series Active Probe
Safety
Warning
Protective
Earth
Chassis
Ground
Test Ground
RIGOL
III
Model
Bandwidth
Document Overview
This document is used to guide users to get a quick understanding of the
PVA7000 series active probe as well as its using method. Besides, this
document gives service information relating to general care and cleaning.
PVA7000 series active probe includes the following model.
PVA7250 >2.5GHz
Main topics:
PVA7000 Series Overview
This chapter gives a brief introduction of the probe, including general
inspection, probe dimensions, standard accessories, and etc.
To Use PVA7000 Series Active Probe
This chapter introduces how to use the probe, including how to connect to
the oscilloscope, how to use the probe head, how to replace probe
accessories, how to adjust the offset voltage, how to calibrate the probe,
and etc.
Care and Cleaning
Warranty
Specifications
User Guide for PVA7000 Series Active Probe
RIGOL
Contents
Guaranty and Declaration ................................................................... I
Safety Notices and Symbols ............................................................... II
Document Overview ......................................................................... III
PVA7000 Series Overview ................................................................... 1
Probe Introduction ........................................................................... 2
General Inspection ........................................................................... 3
Probe Dimensions ............................................................................. 4
Accessories and Options .................................................................... 5
Active Probe Amplifier ....................................................................... 5
Probe Head...................................................................................... 6
To Use PVA7000 Series Active Probe .................................................. 9
To Connect to the Oscilloscope ........................................................ 10
To Use the Probe Head ................................................................... 12
To Replace Probe Accessories .......................................................... 15
To Adjust Offset Voltage .................................................................. 16
To Calibrate the Probe..................................................................... 17
Care and Cleaning ............................................................................. 18
Warranty ........................................................................................... 19
Specifications .................................................................................... 20
IV User Guide for PVA7000 Series Active Probe
RIGOL
1
PVA7000 Series Overview
This chapter guides users to quickly get familiar with the PVA7000 series active
probe.
Main topics:
Probe Introduction
General Inspection
Probe Dimensions
Accessories and Options
Active Probe Amplifier
Probe Head
User Guide for PVA7000 Series Active Probe
RIGOL
Probe Introduction
PVA7000, with more than 2.5GHz bandwidth, is an active probe for high
frequency application. It can be used to measure differential and single-ended
signals with better common mode rejection. PVA7000 uses plug-on socket
probe head and supports 3 types of interchangeable probe heads to optimize
the performance and usability. Besides, its replaceable probe tip prolongs the
service life of the probe and the probe tip spacing can be precisely adjusted to
fit different test point spacings.
PVA7000 is compatible with the auto-identification port of RIGOL
MSO/DS7000/MSO8000 series oscilloscope and can be recognized and
configured automatically by this port. Its snap-in BNC connector enables easier
connection with the oscilloscope.
PVA7000 provides various accessories and options, as well as multiple
replaceable components which make it applicable to be used in different tests
and measurements.
2 User Guide for PVA7000 Series Active Probe
General Inspection
1
． Inspect the packaging
If the packaging has been damaged, do not dispose the damaged
packaging or cushioning materials until the shipment has been checked
for completeness and has passed both electrical and mechanical tests.
The consigner or carrier shall be liable for the damage to the instrument
resulting from shipment. RIGOL would not be responsible for free
maintenance/rework or replacement of the instrument.
2
． Inspect the instrument
In case of any mechanical damage, missing parts, or failure in passing the
electrical and mechanical tests, contact your RIGOL sales
representative.
3
． Check the accessories
Please check the accessories according to the packing lists. If the
accessories are damaged or incomplete, please contact your RIGOL
sales representative.
RIGOL
User Guide for PVA7000 Series Active Probe 3
Loading...