RIGOL RIGOL DS2102A Datasheet

MSO/DS2000A

Series

Digital Oscilloscope

Bandwidth up to 300 MHz, standard with 50 Ω input

2 analog channels, 16 digital channels (MSO)

Lower noise oor, wider vertical range: 500 uV/div~10 V/div
Real-time Sample Rate: analog channel up to 2 GSa/s, digital channel

up to 1 GSa/s (MSO)

Memory Depth: analog channel up to 14 Mpts (standard)/56 Mpts (optional),

digital channel up to 14 Mpts (standard)/28 Mpts (optional, MSO)

Innovative "UltraVision" technology

Waveform capture rate up to 52,000 wfms/s
Up to 256 levels intensity grading waveform display
Up to 65,000 frames hardware real-time waveform record, playback and

analysis functions (standard)

A variety of trigger and bus decoding functions (Parallel, RS232, I2C,

SPI, CAN)

Built-in dual-channel 25 MHz signal source (MSO2000A-S)

Complete connectivity: USB Host&Device, LAN (LXI), AUX,

USB-GPIB (optional)

8 inch TFT (800x480) WVGA

RIGOL

MSO/DS2000A series is the new mainstream digital scope to meet the
customer's applications with its innovative technology. MSO2000A series has
2+16 channels, targeting for the embedded design and test market with its

industry leading specications, powerful trigger functions and broad analysis

capabilities.

TECHNOLOGIES,INC.

MSO/DS2000A Series Digital Oscilloscope

RUN/STOP/SINGLE

Built-in source control key
(MSO2000A-S)

Waveform recording&playback

16 digital channels (MSO)

Product Dimensions: Width×Height×Depth = 361.6 mmx179.6 mmx130.8 mm

Innovative UltraVision Technology (Analog Channel)

Models and Key Specications

Independent control
for each channel

Weight: 3.9 kg±0.5 kg (Without Package)

Deep memory depth (up to 56 Mpts)
Higher waveform capture rate (up to 52,000 wfms/s)
Real-time waveform recording, playback and analysis functions

(up to 65,000 frames)

Multi-level intensity grading display (up to 256 levels)

Decoding

Model

Analog BW 100 MHz 200 MHz 300 MHz

Number of Analog Channels 2

Number of Digital Channels (MSO) 16 (support digital channel ungrouping and grouping operation)

Max. Real-time Sample Rate

Max. Memory Depth

Max. Waveform Capture rate 52,000 wfms/s
Hardware Real-time Waveform

Recording, Playback and Analysis
Functions

Standard Probes

Built-in Dual-channel 25 MHz
Source

1

RIGOL

DS2102A

MSO2102A MSO2202A MSO2302A

2 sets of PVP2350 350 MHz BW passive probes for all models; 1 set of RPL2316 logic analyzer probe also available

No Yes No Yes No Yes

MSO2102A-S

Analog channel: 2 GSa/s (single-channel), 1 GSa/s (dual-channel)

Digital channel: 1 GSa/s (8-channel), 500 MSa/s (16-channel)

Analog channel: 14 Mpts (single-channel), 7 Mpts (dual-channel) standard;

56 Mpts (single-channel), 28 Mpts (dual-channel) optional

Digital channel: 14 Mpts (8-channel), 7 Mpts (16-channel) standard;

28 Mpts (8-channel), 14 Mpts (16-channel) optional

DS2202A

MSO2202A-S

Up to 65,000 frames (digital channel turned off)
Up to 32,000 frames (digital channel turned on)

for MSO

DS2302A

MSO2302A-S

Wide vertical range (500 uV/div~10 V/div), low noise
oor, better for small signal capturing

Built-in dual-channel 25 MHz source (MSO2000A-S)

UltraVision: deep memory (analog channel up to 14 Mpts

(standard)/56 Mpts (optional))

UltraVision: real-time ceaseless waveform recording,

playback and analysis functions

UltraVision: up to 52,000 wfms/s waveform capture rate

UltraVision: multi-level intensity grading display

(up to 256 levels)

Serial bus trigger&decoding functions

(RS232, I2C, SPI, and CAN)

Various trigger functions (Runt, Setup/Hold, Nth Edge…)

RIGOL

2

MSO2

000

A Series Mixed Signal Oscilloscope

Besides the powerful functions of DS2000A, you
could get more from MSO2000A with:

16 digital channels

Sample rate of digital channel up to 1 GSa/s
Memory depth of digital channel up to 28 Mpts

Waveform capture rate of digital channel up to 52,000 wfms/s
Hardware real-time waveform recording and playback functions,

up to 65,000 frames can be recorded

Triggering and decoding across analog and digital channels
Easy ungrouping and grouping operation of the digital channels

Supports a variety of logic levels
Up to 2+16 channels; trigger across the analog and digital channels

Time correlated display and analysis for both the analog and digital

channel waveforms

Mixed signal analysis with analog and digital channels

Innovative UltraVision Technology
(Digital Channel)

Deep memory depth (up to 28 Mpts)

High waveform capture rate (up to 52,000 wfms/s)
Real-time waveform recording and playback functions

(up to 65,000 frames)

Multi-level intensity grading display

Easy to be grouped and labeled for digital channels

3

Deep memory depth for the digital channels, serial bus
triggering and decoding on digital channels

RIGOL

Supports a variety of logic levels

RIGOL

Probes Supported by MSO/DS2000A Series:

RIGOL Passive Probes

Model Type Description

High Z

Probe

PVP2150

High Z

Probe

PVP2350

High Z

Probe

RP3500A

High
Voltage
Probe

RP1300H

High
Voltage
Probe

RP1010H

1X: DC to 35 MHz
10X: DC to 150 MHz
Compatibility: all

RIGOL

scopes.

1X: DC to 35 MHz
10X: DC to 350 MHz
Compatibility: all

RIGOL

scopes.

DC to 500 MHz
Compatibility: all

RIGOL

scopes.

DC to 300 MHz
CAT I 2000 V (DC+AC),
CAT II 1500 V (DC+AC)
Compatibility: all

RIGOL

scopes.

DC to 40 MHz
DC: 0 to 10 kV DC,
AC: pulse ≤ 20 kVp-p,
AC: sine wave ≤ 7
kVrms
Compatibility: all

RIGOL

scopes.

RIGOL Active & Current Probes

Model Type Description

BW: DC to 300 kHz

Max. input
Current
Probe

RP1001C

Current
Probe

RP1002C

Current
Probe

RP1003C

Current
Probe

RP1004C

Current
Probe

RP1005C

Power
Supply

RP1000P

DC: ±100 A,

AC P-P: 200 A,

AC RMS: 70 A

Compatibility: all

BW: DC to 1 MHz

Max. input

DC: ±70 A,

AC P-P: 140 A,

AC RMS: 50 A

Compatibility: all

BW: DC to 50 MHz

Max. input

AC P-P: 50 A (noncontinuous),

AC RMS: 30 A

Compatibility: all

Must order RP1000P power supply.

BW: DC to 100 MHz

Max. input

AC P-P: 50 A (noncontinuous),

AC RMS: 30 A

Compatibility: all

Must order RP1000P power supply.

BW: DC to 10 MHz

Max. input

AC P-P: 300 A (noncontinuous), 500

A (@pulse width ≤ 30 us),

AC RMS: 150 A

Compatibility: all

Must order RP1000P power supply.

Power supply for RP1003C,

RP1004C and RP1005C, support 4

channels.

RIGOL

RIGOL

RIGOL

RIGOL

RIGOL

scopes.

scopes.

scopes.

scopes.

scopes.

RP1018H

RPL2316

High
Voltage
Probe

Logic
Analyzer
Probe

DC to 150 MHz
DC+AC Peak: 18 kV CAT II
AC RMS: 12 kV CAT II
Compatibility: all

RIGOL

scopes.

Logic analyzer probe
(for MSO4000&
MSO2000A)

High
Voltage
Differential
Probe

RP1025D

BW: 25 MHz

Max. voltage ≤ 1400 Vpp

Compatibility: all

RIGOL

scopes.

RP1050D

RP1100D

High
Voltage
Differential
Probe

High
Voltage
Differential
Probe

BW: 50 MHz

Max. voltage ≤ 7000 Vpp

Compatibility: all

BW: 100 MHz

Max. voltage ≤ 7000 Vpp

Compatibility: all

RIGOL

RIGOL

RIGOL

scopes.

scopes.

4

Specications

All the specications are guaranteed except the parameters marked with "Typical" and the oscilloscope needs to operate for more than 30
minutes under the specied operation temperature.

Sample

Sample Mode Real-time Sample

Real-time Sample
Rate

Peak Detect

Averaging

High Resolution 12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s).

Minimum Detectable
Pulse Width

Memory Depth

Analog channel: 2 GSa/s (single-channel), 1 Gsa/s (dual-channel)
Digital channel: 1 GSa/s (8-channel), 500 MSa/s (16-channel)

Analog channel: 500 ps (single-channel), 1 ns (dual-channel)
Digital channel: 1 ns (8-channel), 2 ns (16-channel)

After all the channels nish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,
4096 or 8192.

Digital channel: 5 ns

Analog channel:
Single-channel: Auto, 14 kpts, 140 kpts, 1.4 Mpts, 14 Mpts and 56 Mpts (optional) are available
Dual-channel: Auto, 7 kpts, 70 kpts, 700 kpts, 7 Mpts and 28 Mpts (optional) are available
Digital channel:
14 Mpts (8-channel), 7 Mpts (16-channel) standard; 28 Mpts (8-channel), 14 Mpts (16-channel) optional

Input

Number of Channels

Input Coupling DC, AC or GND

Input Impedance

Probe Attenuation

Coefcient

Maximum Input
Voltage (1 MΩ)

MSO2XX2A/2XX2A-S: 2 analog channels+16 digital channels
DS2XX2A: 2 analog channels

Analog channel: (1 MΩ±1%) || (16 pF±3 pF) or 50 Ω±1.5%
Digital channel: (101 kΩ±1%) || (9 pF±1 pF)

Analog channel: 0.01X to 1000X, in 1-2-5 step

Analog channel: CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 Vpk
Digital channel: CAT I 40 Vrms, transient overvoltage 800 Vpk

Horizontal

Time Base Scale

Channel to Channel
Skew

Maximum Record

Length

Time Base Accuracy

Time Base Drift ≤±5 ppm/year

Maximum Delay

Range

Time Base Mode Y-T, X-Y, Roll

Number of X-Ys 1 path

Waveform Capture

[2]

Rate

MSO2302A/2302A-S/DS2302A: 1.000 ns/div to 1.000 ks/div
MSO2202A/2202A-S/DS2202A: 2.000 ns/div to 1.000 ks/div
MSO2102A/2102A-S /DS2102A: 5.000 ns/div to 1.000 ks/div

1 ns (typical), 2 ns (maximum)

14 Mpts (standard), 56 Mpts (optional)

[1]

≤±25 ppm

Memory Depth/Sample Rate

52,000 wfms/s (dots display)

5

RIGOL

Vertical

Bandwidth (-3 dB)
(50 Ω)

Single Bandwidth
(50 Ω)

Vertical Resolution

Vertical Scale

[3]

Offset Range

Bandwidth Limit

Low Frequency

Response (AC
Coupling, -3 dB)

Calculated Rise Time

DC Gain Accuracy

DC Offset Accuracy ±0.1 div ± 2 mV ± 1% offset value

Channel to Channel
Isolation

MSO2302A/2302A-S/DS2302A: DC to 300 MHz
MSO2202A/2202A-S/DS2202A: DC to 200 MHz
MSO2102A/2102A-S/DS2102A: DC to 100 MHz

MSO2302A/2302A-S/DS2302A: DC to 300 MHz
MSO2202A/2202A-S/DS2202A: DC to 200 MHz
MSO2102A/2102A-S/DS2102A: DC to 100 MHz

Analog channel: 8 bit
Digital channel: 1 bit

When the input impedance is 50 Ω: 500 μV/div to 1 V/div
When the input impedance is 1 MΩ: 500 μV/div to 10 V/div

When the input impedance is 50 Ω:
500 μV/div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 1 V/div: ±12 V
When the input impedance is 1 MΩ:
500 μV /div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 2 V/div: ±50 V

2.05 V/div to 10 V/div: ±100 V

MSO2302A/2302A-S/2202A/2202A-S/DS2302A/2202A: 20 MHz/100 MHz

[1]

MSO2102A/2102A-S/DS2102A: 20 MHz

≤5 Hz (on BNC)

MSO2302A/2302A-S/DS2302A: 1.2 ns

[1]

MSO2202A/2202A-S/DS2202A: 1.8 ns
MSO2102A/2102A-S/DS2102A: 3.5 ns

[3]

±2% full scale

DC to maximum bandwidth: >40 dB

Vertical (Digital Channel)

Threshold 1 group with 8 channels adjustable threshold

TTL (1.4 V)

5.0 V CMOS (+2.5 V)

3.3 V CMOS (+1.65 V)

2.5 V CMOS (+1.25 V)

Threshold Selection

1.8 V CMOS (+0.9 V)

ECL (-1.3 V)

PECL (+3.7 V)

LVDS (+1.2 V)

0 V

User

Threshold Range ±20.0 V, in 10 mV step

Threshold Accuracy ±(100 mV + 3% of threshold setting)

Dynamic Range ±10 V + threshold

Minimum Voltage

Swing

500 mVpp

Input Impedance //101 kΩ

Probe Loading ≈8 pF

Vertical Resolution 1 bit

Trigger

RIGOL

6

Trigger Level Range

Internal: ±5 div from center of the screen
EXT: ±4 V

Trigger Mode Auto, Normal, Single

Holdoff Range 100 ns to 10 s

High Frequency
Rejection

Low Frequency
Rejection

[1]

[1]

Trigger Sensitivity

75 kHz

75 kHz

1 div (below 10 mV or noise rejection is enabled)

[1]

0.3 div (above 10 mV and noise rejection is disabled)

Edge Trigger

Edge Type Rising, Falling, Rising/Falling

Pulse Trigger

Pulse Condition

Positive Pulse Width (greater than, lower than, within specic interval)
Negative Pulse Width (greater than, lower than, within specic interval)

Pulse Width Range 2 ns to 4 s

Runt Trigger

Pulse Condition None, >, <, <>

Pulse Polarity Positive, Negative

Pulse Range 2 ns to 4 s

Windows Trigger (Optional)

Windows Type Rising, Falling, Rising/Falling

Trigger Position Enter, Exit, Time

Windows Time 16 ns to 4 s

Nth Edge Trigger (Optional)

Edge Type Rising, Falling

Idle Time 16 ns to 4 s

Number of Edges 1 to 65535

Slope Trigger

Slope Condition

Positive Slope (greater than, lower than, within specic interval)
Negative Slope (greater than, lower than, within specic interval)

Time Setting 10 ns to 1 s

Video Trigger (Optional)

Signal Standard

NTSC, PAL/SECAM, 480P, 576P (standard)
720P, 1080P and 1080I (optional)

Pattern Trigger

Pattern Setting H, L, X, Rising Edge, Falling Edge

Delay Trigger (Optional)

Edge Type Rising, Falling

Delay Type >, <, <>, ><

Delay Time 2 ns to 4 s

TimeOut Trigger (Optional)

Edge Type Rising, Falling, Rising/Falling

Timeout Time 16 ns to 4 s

Duration Trigger (Optional)

Pattern Setting H, L, X

Trigger Condition >, <, <>

Duration Time 2 ns to 4 s

Setup/Hold Trigger

Edge Type Rising, Falling

Data Type H, L

Setup Time 2 ns to 1 s

7

RIGOL

Hold Time 2 ns to 1 s

RS232/UART Trigger

Polarity Normal, Invert

Trigger Condition Start, Error, Check Error, Data

Baud

Data Bits 5 bit, 6 bit, 7 bit, 8 bit

I2C Trigger

Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D

Address Bits 7 bit, 8 bit, 10 bit

Address Range 0 to 127, 0 to 255, 0 to 1023

Byte Length 1 to 5

SPI Trigger

Trigger Condition Timeout

Timeout Value 100 ns to 1 s

Data Bits 4 bit to 32 bit

Data Setting H, L, X

CAN Trigger (Optional)

Signal Type Rx, Tx, CAN_H, CAN_L, Differential

Trigger Condition SOF, EOF, Frame Type, Frame Error

Baud

Sample Point 5% to 95%

Frame Type Data, Remote, Error, Over Load

Error Type Bit Fill, Answer Error, Check Error, Format Error, Random Error

USB Trigger (Optional)

Signal Speed Low Speed, Full Speed

Trigger Condition SOP, EOP, RC, Suspend, Exit Suspend

2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, 230400 bps, 460800 bps, 921600

bps, 1 Mbps, User

10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps, 1

Mbps, User

Measure

Manual Mode

Cursor

Auto Measurement

Number of
Measurements

Measurement Range Screen Region or Cursor Region

Measurement Statistic Current, Average, Max, Min, Standard Deviation, Number of Measurements

Frequency Counter Hardware 6 bits frequency counter (channels are selectable)

Track Mode Voltage and Time Values of the Waveform Point

Auto Mode Allow to display cursors during auto measurement

Analog channel:
Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Average, Vrms-N, Vrms-1, Overshoot,
Pre-shoot, Area, Period Area, Frequency, Period, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width,

Positive Duty Cycle, Negative Duty Cycle, Delay AB , Delay AB , Delay AB , Delay AB , Phase
AB , Phase AB , Phase AB , Phase AB

Digital channel:
Frequency, Period, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay A

B , Delay AB , Delay AB , Delay AB , Phase AB , Phase AB , Phase AB , Phase



AB

Display 5 measurements at the same time.

Voltage Deviation between Cursors (△V)
Time Deviation between Cursors (△T)

Reciprocal of △T (Hz) (1/△T)

Math Operation

Waveform
Operation

A+B, A-B, A×B, A÷B, FFT, Digital Filter, Editable Advanced Operation, Logic Operation

RIGOL

8

FFT Window Rectangle, Hanning, Blackman, Hamming

FFT Display Split, Full Screen

FFT Vertical
Scale

Logic
Operation

Vrms, dB

AND, OR, NOT, XOR

Math Function Intg, Diff, Lg, Exp, Sqrt, Sine, Cosine, Tangent

Number of
Buses for

2

Decoding

Decoding Type Parallel (standard), RS232 (optional), I2C (optional), SPI (optional), CAN (optional)

Display

Display Type 8.0 inches (203 mm) TFT LCD display

Display Resolution 800 horizontal×RGB×480 Vertical Pixel

Display Color 16

0,000

Color (TFT)

Persistence Time Min, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Innite

Display Type Dots, Vectors

Real-time Clock Time and Date (user adjustable)

Signal Source (MSO2000A-S)

Channels 2

Sample Rate 200 MSa/s

Vertical Resolution 14 bits

Max. Frequency 25 MHz

Standard Waveform Sine, Square, Pulse, Ramp, Noise, DC

Built-in Waveform Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, Lorentz, Haversine

Frequency Range 100 mHz to 25 MHz

Flatness ±0.5 dB (relative to 1 kHz)

Sine

Square/Pulse

Ramp

Noise Bandwidth 25 MHz (typical)

Built-in Waveform Frequency Range 100 mHz to 1 MHz

Arbitrary Waveform

Harmonic Distortion -40 dBc

Stray (Non-harmonic) -40 dBc

Total Harmonic Distortion 1%

S/N Ratio 40 dB

Frequency Range

Rise/Fall Time <15 ns

Overshoot <5%

Duty Cycle

Duty Cycle Resolution 1% or 10 ns (the larger of the two)

Min. Pulse Width 20 ns

Pulse Width Resolution 10 ns or 5 bits (the larger of the two)

Jitter 500 ps

Frequency Range 100 mHz to 100 kHz

Linearity 1%

Symmetry 0 to 100%

Frequency Range 100 mHz to 10 MHz

Waveform Length 1 to 16k points

Internal Storage Location 10

Square: 100 mHz to 15 MHz
Pulse: 100 mHz to 1 MHz

Square: 50%
Pulse: 10% to 90% (user adjustable)

9

RIGOL

100 ppm (lower than 10 kHz)
50 ppm (higher than 10 kHz)

Frequency

Accuracy

Resolution 100 mHz or 4 bits, the larger of the two

Amplitude

Output Range

20 mVpp to 5 Vpp, HighZ
10 mVpp to 2.5 Vpp, 50 Ω

Resolution 100 μV or 3 bits, the larger of the two

Accuracy ±(2% of the setting value + 1 mV) (frequency = 1 kHz)

±2.5 V, HighZ
±1.25 V, 50 Ω

DC Offset

Range

Resolution 100 μV or 3 bits, the larger of the two

Accuracy ±(2% of the set offset value + 5 mV + 0.5% of the amplitude)

Modulation AM, FM

I/O

Standard Ports USB Host (support USB-GPIB), USB Device, LAN, Aux Output (TrigOut/PassFail)

Printer Compatibility PictBridge

General Specications

Probe Compensation Output

Output Voltage
Frequency

Power

Power Voltage 100 V to 240 V, 45 Hz to 440 Hz
Power Maximum 50 W
Fuse 2 A, T degree, 250 V

Environment

Temperature Range

Cooling Method Fan cooling

Humidity Range

Altitude

Physical Characteristics

[4]

Size

Weight

Calibration Interval

The recommended calibration interval is

Electromagnetic Compatibility and Safety

EMC

Safety

[1]

Note

: Typical value.

[2]

Note

: Maximum value. 20 ns, single-channel mode, dots display, auto memory depth.

[3]

Note

: 500 uV/div is the digital amplication of 1 mV/div. When calculating the DC Gain Accuracy, the full scale should be considered as 8 mV based on 1 mV/div.

[4]

Note

: Supporting legs and handle folded, knob height included.

[5]

Note

: Standard conguration.

[1]

[1]

About 3 V, peak-peak

1 kHz

Operating: 0℃ to +50

℃

Non-operating: -40℃ to +70

℃

0℃ to +30℃: ≤95% relative humidity
+30℃ to +40℃: ≤ 75% relative humidity

+40℃ to +50℃: ≤45% relative humidity
Operating: under 3,000 meters
Non-operating: under 15,000 meters

Width×Height×Depth = 361.6 mm×179.6 mm×130.8 mm

[5]

Package Excluded 3.9 kg±0.5 kg
Package Included 4.5 kg±0.5 kg

18 months

.

complies with EMC Directive 2014/30/EU, complies with or above the standard specified in IEC61326-1:2013/
EN61326-1:2013 Group 1 Class A

CISPR 11/EN 55011
IEC 61000-4-2:2008/EN 61000-4-2 ±4.0 kV (contact discharge), ±8.0 kV (air discharge)

IEC 61000-4-3:2002/EN 61000-4-3

3 V/m (80 MHz to 1 GHz); 3 V/m (1.4 GHz to 2 GHz);
1 V/m (2.0 GHz to 2.7 GHz)

IEC 61000-4-4:2004/EN 61000-4-4 1 kV power

IEC 61000-4-5:2001/EN 61000-4-5

0.5 kV (phase-to-neutral voltage); 1 kV (phase-to-earth voltage); 1 kV

(neutral-to-earth voltage)

IEC 61000-4-6:2003/EN 61000-4-6 3 V, 0.15 to 80 MHz

voltage dip: 0% UT during half cycle; 0% UT during 1 cycle; 70% UT during

IEC 61000-4-11:2004/EN 61000-4-11

25 cycles

short interruption: 0% UT during 250 cycles

complies with IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012 R4.16 and CAN/CSA-C22.2
No. 61010-1-12+ GI1+ GI2

RIGOL

10

Ordering Information

Description Order Number

DS2102A (100 MHz, 2-analog channel oscilloscope) DS2102A

MSO2102A (100 MHz, 2-analog channel + 16-digital channel MSO) MSO2102A

MSO2102A-S (100 MHz, 2-analog channel + 16-digital channel MSO + 2-channel
25 MHz signal source)

DS2202A (200 MHz, 2-analog channel oscilloscope) DS2202A

Model

Standard
Accessories

Optional
Accessories

Deep Memory
Option

Advanced Trigger

Option

Decoding Options

MSO2202A (200 MHz, 2-analog channel + 16-digital channel MSO) MSO2202A

MSO2202A-S (200 MHz, 2-analog channel + 16-digital channel MSO + 2-channel
25 MHz signal source)

DS2302A (300 MHz, 2-analog channel oscilloscope) DS2302A

MSO2302A (300 MHz, 2-analog channel + 16-digital channel MSO) MSO2302A

MSO2302A-S (300 MHz, 2-analog channel + 16-digital channel MSO + 2-channel
25 MHz signal source)

Power Cord conforming to the standard of the destination country -

USB Data Cable CB-USBA-USBB-FF-150

2 Passive Probes (350 MHz) PVP2350

1 set LA Probe (only available for MSO) RPL2316

Quick Guide (Hard Copy) -

Rack Mount Kit RM-DS2000A

Passive Probe (500 MHz) RP3500A

USB-GPIB Interface Converter USB-GPIB

Soft Carrying Bag BAG-G1

Analog channel: 56 Mpts (single-channel)/28 Mpts (dual-channel)
Digital channel: 28 Mpts (8-channel)/14 Mpts (16-channel)

Windows trigger, Nth edge trigger, HDTV trigger, Delay trigger, TimeOut trigger,

Duration trigger, USB trigger

RS232, I2C, SPI Decoding Kit SD-DS2000A

CAN Analysis Kit (Trigger + Decoding) CAN-DS2000A

MSO2102A-S

MSO2202A-S

MSO2302A-S

MEM-DS2000A

AT-DS2000A

Warranty

Three-year warranty,excluding probes and accessories.

11

RIGOL

HEADQUARTER

EUROPE

NORTH AMERICA

JAPAN

RIGOL

TECHNOLOGIES, INC.

No.8 Keling Road, New District,Suzhou,

JiangSu,P.R.China

Tel:[phone]
Email:[e-mail]

®

RIGOL

is the registered trademark of

RIGOL

TECHNOLOGIES EU GmbH

Lindbergh str. 4
82178 Puchheim
Germany
Tel: [phone]
Email: [e-mail]

RIGOL

Technologies, Inc. Product information in this document subject to

update without notice. For the latest information about

local

RIGOL

ofce or access

RIGOL

ofcial website:

RIGOL

TECHNOLOGIES, USA INC.

8140 SW Nimbus Ave.
Beaverton, OR 97008
Tel: 877-4­Fax: 877-4­Email: [e-mail]

RIGOL

's products, applications and services, please contact

www.rigol.com

RIGOL

RIGOL

-1

-1

RIGOL

TECHNOLOGIES JAPAN, LLC

MJ Bldg. 3F, 1-7-4 Minato, Chuou-ku,

Tokyo, Japan 104-0043

Tel: [phone]

Fax: [phone]

Email: [e-mail]

DSA18100-2019-05