用户指南 RIGOL
User’s Guide RIGOL
高功率衰减器
产品简介
本系列高功率衰减器同轴负载采用氮化铝电阻片及无铅工
艺设计制造，接头符合 MIL-C-39012 标准。产品具有精度
高，寿命长，无毒环保等特点。
该衰减器可用于各种测试，终端匹配等场合。如，功放的
测试调节，功分耦合端口匹配等。
注意：本产品的安装应避免直接雨淋，散热片应垂直方向安装，散热器周围应有足够通风
以利于散热。
主要指标
型号
数量
阻抗
频率范围 DC 至 3 GHz
最大电压驻波比
功率
温度范围 -55℃至+125℃
衰减值
插入损耗 ±1 dB
ATT03301H
1
50 Ω
1.25
100 W
30 dB
High Power Attenuator
Product Overview
This seires high power attenuator coaxial load adopts the
aluminium nitride resistor and lead-free technique. Its
connector conforms to the MIL-C-39012 standard. This
product features high precision and long service life; and
is innocuous and environment-friendly.
This attenuator can be used in various tests and terminal
matching; for example, the test adjustment of power
amplifier as well as the splitter and coupling terminals
matching.
Note: This product should be protected from rain. The rediating fin should be installed
vertically. Good ventilation should be ensured for the radiator.
Specifications
Modle ATT03301H
Quantity 1
Impedance 50 Ω
Frequency Range DC to 3 GHz
Max. VSWR 1.25
Power 100 W
Temperature range
Attenuation 30 dB
Insertion Loss ±1 dB
-55℃ to +125℃
2014 年 6 月
Jun. 2014
Loading...