RIGOL
User’s Guide
DSA700 Options and Accessories
Jun. 2016
RIGOL TECHNOLOGIES, INC.
RIGOL
I
Guaranty and Declaration
Copyright
© 2016 RIGOL TECHNOLOGIES, INC. All Rights Reserved.
Trademark Information
RIGOL is a registered trademark of RIGOL TECHNOLOGIES, INC.
Publication Number
UMD18100-1110
Notices
RIGOL produ cts are cov ered by P.R.C. and f oreign pa tents, issue d and pendin g.
RIGOL reserves the right to modify or change parts of or all the specifications
and pricing policies at the company’s s ole de cision .
Information in this publication replaces all previously released materials.
Information in this publication is subject to change without notice.
RIGOL shall not be liable for either incidental or consequential losses in
connection with the furnishing, use, or perf or mance of this manua l, as well as
any information contained.
Any part of this document is f orbi dden to be copie d, phot ocopie d, or rearranged
without prior written approval of RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and industrial
standards in China as well as the ISO9001:2008 standard and the ISO14001:2004
standard. Other international standard conformance certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or this manual,
please contact RIGOL.
E-mail: service@rigol.com
Websites: www.rigol.com
DSA700 Options and Accessories
RIGOL Content
II
Content
Guaranty and Declaration ......................................................................... I
DSA700 Options and Accessories ............................................................. 1
Standard Accessories ............................................................................... 3
EMI Filter and Quasi-Peak Detector ......................................................... 4
Advanced Measurement Kit ...................................................................... 5
USB-GPIB Inter f a c e Converter ............................................................... 11
DSA700 Options and Accessories
RIGOL
1
Order
[1]
signal seamless capture
SSC-DSA
[2]
[2]
DSA700 Options and Accessories
Options and a cces sorie s pro vi ded by DSA700 series spectrum analyzer are as shown
in the table below. If needed, please contact RIGOL or the local distributors. This
manual only introduces th e f unctions of some options. For the option with remark in
the table below, refer to the dedicated manual.
Description
spectrum analyzer, 100 kHz to 500 MHz (with
preamplifier)
Model
spectrum analyzer, 100 kHz to 1 GHz (with
preamplifier)
Standard
accessories
quick guide (hard copy) power cable EMI filter & quasi-peak detector EMI-DSA800
Options
advanced measurement kit AMK-DSA800
DSA PC software
include: N-SMA cable, BNC -BNC cable, N-BNC
adaptor, N-SMA adaptor, 75 Ω to 50 Ω adaptor,
900 MHz/1.8 GHz antenna (2pcs ) , 2.4 GHz
antenna (2pcs)
include: N(F)-N(F) adaptor (1pcs), N(M)-N(M)
adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs),
N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F)
Optional
accessories
adaptor (1pcs), SMA(M)-SMA(M) adaptor (1pcs),
BNC T type adaptor (1pcs), 50 Ω SMA load (1pcs),
50 Ω BNC impedance adaptor (1pcs)
include: 50 Ω to 75 Ω adaptor (2pcs)
include: 6dB attenuator (1pcs), 10dB attenuator
[2]
(2pcs)
30dB high power attenuator, max. power 100W
N(M)-N(M) RF cable
Number
DSA705
DSA710
Ultra Spectrum
DSA Utility Kit
[2]
RF Adaptor Kit
[2]
RF CATV Kit
RF Attenuator
Kit
ATT03301H
[2]
CB-NM-NM-75-L
-12G
DSA700 Options and Accessories
RIGOL
2
[2]
[2]
near field probe
[2]
NFP-3
S1210 EMI
Software
[2]
CB-USBA-USBBFF-150
N(M)-SMA(M) RF cable
RF demo ki t (transmitter)
RF demo ki t (receiver)
[2]
TX1000
RX1000
EMI pre-compliance test software
rack mount kit
RM-DSA800
[3]
CB-NM-SMAM-7
5-L-12G
Pre-compliance
soft carrying bag BAG-G1
USB cable
USB to GPIB interface converter for instrument USB-GPIB
Remark:
[1] For more details of this option, refer to the help document of Ultra Spectrum (you can call the
manual by clicking the icon
from
www.rigol.com).
[2] For more details, refer to the corresponding manual (included in the option package in hard
copy form, or download the manual from
[3] For more details of this accessory, refer to the help document of S1210 EMI Pre-compliance
Software (you can call the manual by clicking Help in the menu bar of the software, or download
the manual from
www.rigol.com).
in the upper right corner of the software, or download the manual
www.rigol.com).
DSA700 Options and Accessories
RIGOL
3
Standard Accessories
The following are the standard accessories.
Power Cord Quick Guide
Note: Images in this section a re indicative o nly . The actual pr oducts you receive may
differ.
DSA700 Options and Accessories
RIGOL
4
EMI Filter and Quasi-Peak Detector
EMI-DSA800 opt ion p rovi des Quasi-Peak detector and EMI filter (200 Hz, 9 kHz, 120
kHz, -6 dB bandwidth). Quasi-Peak detection is a weighted form of peak detection.
For each data point, the detector det ects the pea ks within the specified time interval,
weights the peaks detected using circuit with specified charge and discharge
structures as well as the display time constant specified in the CISPR Publication 16
standards and display the result. By default, the ins trument uses Gauss filter and will
switch to EMI filter automatically if Quasi-Peak detector is selected.
Press BW/Det at the front panel. Then, press Det Type to select Quasi-Peak
detector. At this point, the instrument automatically chan ges the filter type to EMI
and the Filter Type menu is gr ay e d out and disa bled. EMI-DSA800 option is used in
electromagnetic interference test.
DSA700 Options and Accessories
RIGOL
5
Measurement Control
Start Line Stop Line
Advanced Measurement Kit
AMK-DSA800 option provides various measurement functions, in cluding T-Power,
ACP (Adjacent Channel Power), Chan Pwr (Channel Power), OBW (Occupied
Bandwidth), EBW (E missio n Bandwidth ), C/N Ratio, Harmo Dist (Harmonic Distortion)
and TOI (Third Order Intermodulation). For advanced measurement functions, the
measurement mode can be single or continuous and you can control the
measurement including Restart, Pause and Resume.
Press Meas at the front panel and then press Meas Fctn to select a measurement
function. The screen is divided into two windows with the upper window (the basic
measurement window) displaying the sweep trace and the lower window displaying
the measurement results.
1. T-power
The system enters zero span mode and calculates the power within the time
domain. The types of powers available include Peak, Average and RMS.
Measurement Result Measurement Parameters
DSA700 Options and Accessories
RIGOL
6
Main Channel Bandwidth
Adjacent Channel Bandwidth
Channel Spacing
2. ACP
Measure the powers of the main channel and adjacent channels as well as the
power difference between t he main chan nel an d each of the a djacent channel s.
When this function is enabled, the span and resolution bandwidth of the
analyzer are adjusted to smaller values automatically.
3. Chan Pwr
Measure the power and power spectral density within the specif ied channel
bandwidth. When this function is enabled, the span and resolution bandwidth
are automatically adjusted to smaller values.
DSA700 Options and Accessories
7
Integration Bandwidth Channel Power Span
4. OBW
Integrate the power within the whole span and calculate the bandwidth
occupied by this power according to the specified power ratio. The OBW
function also indicates the difference between the center frequency of the
channel under measurement and the center frequency of the analyzer.
RIGOL
DSA700 Options and Accessories
RIGOL
8
Carrier Bandwidth
Noise Bandwidth
5. EBW
Measure the bandwidth between two points on the signal which are X dB below
the highest point within the span.
6. C/N Ratio
Measure the powers of the carrier and noise with the specified bandwidths as
well as their power ratio.
Offset Frequency
DSA700 Options and Accessories
9
7. Harmo Dist
Measure the power of each order of harmonic and THD (total harmonic
distortion) of the carrier. The highest order of harmonic available is 10 and the
fundamental wave amplitude must be greater than -50 dBm, or else the
measurement will be invalid.
RIGOL
DSA700 Options and Accessories
RIGOL
10
8. TOI
Measure the parameters of the TOI production of two signals with the same
amplitude and similar frequency. Those parameters include the frequencies and
amplitudes of the Base Lower, Base Upper, 3rd Order Lower and 3rd Order
Upper signal, as well as the Intercepts of both the Base Lower and Base Upper.
DSA700 Options and Accessories
RIGOL
11
LED Power Indicator
Analyzer
GPIB
USB-GPIB Interface Converter
Through the RIGOL USB-GPIB interface converter, the spectrum analyzer can be
connected to the GPIB bus controller of the PC, namely to expand a GPIB interface
through which the spectrum analyzer can finish various tasks using the GPIB
instructions more easily for the spectrum analyzer. The performance characteristics
of the USB-GPIB interface converter are listed below.
Achieve GPIB control via the USB Host interface of the
spectrum analyzer.
Distribute a GPIB ad dress f or the spe ctrum anal yzer vi a
the GPIB host device (PC).
USB powered instead of external power supply.
Indicate the power status via a LED.
Connect the USB interface and the GPIB interface of the USB-GPIB interface
converter to the USB Host interface of the spectrum analyzer and the GPIB bus
controller of the PC respectively.
PC
USB
Spectrum
DSA700 Options and Accessories
Loading...