Rigol DSA700 series, DSA710, DSA705 User Manual

RIGOL

User’s Guide

DSA700 Options and Acce ssories

Jun. 2016

RIGOL TECHNOLOGIES, INC.

RIGOL

DSA700 Options and Accessories

I

Guaranty and Declaration

Copyright

© 2016 RIGOL TECHNOLOGIES, INC. All Rights Reserved.

Trademark Information

RIGOL is a registered trademark of RIGOL TECHNOLOGIES, INC.

Publication Number

UMD18100-1110

Notices

 RIGOL pro ducts are co vered by P.R.C. and f oreign p atents, issu ed and pendi ng.
 RIGOL reserves the right to modify or change parts of or all the specifications

and pricing policies at the company’ s s ole de cision .

 Information in this publication replaces all previ ously released materials.
 Information in this publication is subject to change without notice.
 RIGOL shall not be liable for either incidental or consequential losses in

connection with the furnishing, use, or performance of this manual, as well as
any information contained.

 Any part of this document is f orbi dden to be copied , photoc opied, or rearranged

without prior written approval of RIGOL.

Product Certification

RIGOL guarantees that this product conforms to the national and industrial
standards in China as well as the ISO9001:2008 standard and the ISO14001:2004
standard. Other international standard conformance certifications are in progress.

Contact Us

If you have any problem or requirement when using our products or this manual,
please contact RIGOL.
E-mail: [e-mail]
Websites: www.rigol.com

RIGOL Content

DSA700 Options and Accessories

II

Content

Guaranty and Declaration ......................................................................... I

DSA700 Options and Accessories ............................................................. 1

Standard Accessories ............................................................................... 3

EMI Filter and Quasi-Peak Detector ......................................................... 4

Advanced Measurement Kit ...................................................................... 5

USB-GPIB Inte r f ac e Converter ............................................................... 11

RIGOL

DSA700 Options and Accessories

1

DSA700 Options and Accessories

Options an d acces sori es p rovi ded by DSA700 series spectrum analyzer are as shown
in the table below. If needed, please contact RIGOL or the local distributors. This
manual only introduces the functions of some options. For the option with remark in
the table below, refer to the dedicated manual.

Description

Order

Number

Model

spectrum analyzer, 100 kHz to 500 MHz (with
preamplifier)

DSA705

spectrum analyzer, 100 kHz to 1 GHz (with
preamplifier)

DSA710

Standard
accessories

quick guide (hard copy) ­power cable -

Options

EMI filter & quasi-peak detector EMI-DSA800
advanced measurement kit AMK-DSA800
DSA PC software

[1]

Ultra Spectrum

signal seamless capture

SSC-DSA

Optional
accessories

include: N-SMA cable, BNC-BNC cable, N-BNC
adaptor, N-SMA adaptor, 75 Ω to 50 Ω adaptor,
900 MHz/1.8 GHz antenna (2pcs), 2.4 GHz
antenna (2pcs)

[2]

DSA Utility Kit

include: N(F)-N(F) adaptor (1pcs), N(M)-N(M)
adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs),
N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F)
adaptor (1pcs), SMA(M)-SMA(M) adaptor (1pcs),
BNC T type adaptor (1pcs), 50 Ω SMA load (1pcs),
50 Ω BNC impedance adaptor (1pcs)

[2]

RF Adaptor Kit

include: 50 Ω to 75 Ω adaptor (2pcs)

[2]

RF CATV Kit

include: 6dB attenuator (1pcs), 10dB attenuator
(2pcs)

[2]

RF Attenuator
Kit

30dB high power attenuator, max. power 100W

[2]

ATT03301H

N(M)-N(M) RF cable

[2]

CB-NM-NM-75-L

-12G

RIGOL

DSA700 Options and Accessories

2

N(M)-SMA(M) RF cable

[2]

CB-NM-SMAM-7
5-L-12G

RF demo kit (transmitter)

[2]

TX1000

RF demo kit (receiver)

[2]

RX1000

near field probe

[2]

NFP-3

EMI pre-compliance test software

[3]

S1210 EMI

Pre-compliance

Software

rack mount kit

[2]

RM-DSA800

soft carrying bag BAG-G1
USB cable

CB-USBA-USBB­FF-150

USB to GPIB interface converter for instrument USB-GPIB

Remark:

[1] For more details of this option, refer to the help document of Ultra Spectrum (you can call the
manual by clicking the icon

in the upper right corner of the software, or download the manual

from

www.rigol.com).

[2] For more details, refer to the corresponding manual (included in the option package in hard
copy form, or download the manual from

www.rigol.com).

[3] For more details of this accessory, refer to the help document of S1210 EMI Pre-compliance
Software (you can call the manual by clicking Help in the menu bar of the software, or download
the manual from

www.rigol.com).

RIGOL

DSA700 Options and Accessories

3

Standard Accessories

The following are the standard accessories.

Power Cord Quick Guide

Note: Images in this section are indicative only. The actual products you receive may
differ.

RIGOL

DSA700 Options and Accessories

4

EMI Filter and Quasi-Peak Detector

EMI-DSA800 option provi des Quasi-Peak detector and EMI filter (200 Hz, 9 kHz, 120
kHz, -6 dB bandwidth). Quasi-Peak detection is a weighted form of peak detection.
For each data point, the detector detects the pea ks within t he specified time interval,
weights the peaks detected using circuit with specified charge and discharge
structures as well as the display time constant specified in the CISPR Publication 16
standards and display the result. By default, t he instrument uses Gauss filter and will
switch to EMI filter automatically if Quasi-Peak detector is selected.

Press BW/Det at the front panel. Then, press Det Type to select Quasi-Peak
detector. At this point, the instrument automatically changes the filter type to EMI
and the Filter Type menu is g ra ye d ou t an d dis abl ed. EMI-DSA800 option is used in
electromagnetic interference test.

RIGOL

DSA700 Options and Accessories

5

Advanced Measurement Kit

AMK-DSA800 option provides various measurement functio ns, in cluding T-Power,
ACP (Adjacent Channel Power), Chan Pwr (Channel Power), OBW (Occupied
Bandwidth), EBW (Emissi on Bandwidt h), C/N Ratio, Harmo Dist (Harmonic Distortion)
and TOI (Third Order Intermodulation). For advanced measurement functions, the
measurement mode can be single or continuous and you can control the
measurement including Restart, Pause and Resume.

Press Meas at the front panel and then press Meas Fctn to select a measurement
function. The screen is divided into two windows with the upper window (the basic
measurement window) displaying the sweep trace and the lower window displaying
the measurement results.

1. T-power

The system enters zero span mode and calculates the power within the time
domain. The types of powers available include Peak, Average and RMS.

Measurement Result Measurement Parameters

Measurement Control

Start Line Stop Line

RIGOL

DSA700 Options and Accessories

6

2. ACP

Measure the powers of the main channel and adjacent channels as well as the
power difference between the main channel an d each of the a djacent channels .
When this function is enabled, the span and resolution bandwidth of the
analyzer are adjusted to smaller values automatically.

3. Chan Pwr

Measure the power and power spectral density within the specified channel
bandwidth. When this function is enabled, the span and resolution bandwidth
are automatically adjusted to smaller values.

Main Channel Bandwidth

Adjacent Channel Bandwidth

Channel Spacing

RIGOL

DSA700 Options and Accessories

7

4. OBW

Integrate the power within the whole span and calculate the bandwidth
occupied by this power according to the specified power ratio. The OBW
function also indicates the difference between the center frequency of the
channel under measurement and the center frequency of the analyzer.

Integration Bandwidth Channel Power Span

RIGOL

DSA700 Options and Accessories

8

5. EBW

Measure the bandwidth between two points on the si gnal which are X dB below
the highest point within the span.

6. C/N Ratio

Measure the powers of the carrier and noise with the specified bandwidths as
well as their power ratio.

Offset Frequency

Carrier Bandwidth

Noise Bandwidth

RIGOL

DSA700 Options and Accessories

9

7. Harmo Dist

Measure the power of each order of harmonic and THD (total harmonic
distortion) of the carrier. The highest order of harmonic available is 10 and the
fundamental wave amplitude must be greater than -50 dBm, or else the
measurement will be invalid.

RIGOL

DSA700 Options and Accessories

10

8. TOI

Measure the parameters of the TOI production of two signals with the same
amplitude a nd similar frequency. Those parameters include the frequencies and
amplitudes of the Base Lower, Base Upper, 3rd Order Lower and 3rd Order
Upper signal, as well as the Intercepts of both the Base Lower and Base Upper.

RIGOL

DSA700 Options and Accessories

11

USB-GPIB Interface Converter

Through the RIGOL USB-GPIB interface converter, the spectrum analyzer can be
connected to the GPIB bus controller of the PC, namely to expand a GPIB interface
through which the spectrum analyzer can finish various tasks using the GPIB
instructions more easily for the spectrum analyzer. The performance characteristics
of the USB-GPIB interface converter are listed below.

Connect the USB interface and the GPIB interface of the USB-GPIB interface
converter to the USB Host interface of the spectrum analyzer and the GPIB bus
controller of the PC respectively.

 Achieve GPIB control via the USB Host interface of the

spectrum analyzer.

 Distribute a GPIB ad dress f or the spectrum analyzer via

the GPIB host device (PC).

 USB powered instead of external power supply.
 Indicate the power status via a LED.

LED Power Indicator

Spectrum

Analyzer

PC

GPIB

USB