Wireless TVWireless TV
Splash ProofSplash Proof
X3
User Manual
Features
Accessories
Connecting the signal to the transmitter box and
you can watch TV by wireless transmission.
Thetransmissionisusedby2.4GHz,itcanconvey
and receive images through the transmitter box.
The transmission of remote control is used by
433 MHz. ( please meet the transmitter box hen
making use of remote control )
The transmitter box provide four channels to use
and it also can avoid the interference of wireless air
waves.
ThewirelessdisplaymeetsIPX6withthedustand
waterresistance,itcanevenbeusedifthesurface
of display and remote control have water, airwater
and snowflakes. (the transmitter box isn’t
waterproof )
User Manual
AVCablex2
AC Adaptor +12V- 2A
AC Adaptor +12V- 3A
Remote control
The TV with great performance of LCD panel, offer
the best picture quality.
Provide several signals , including A/V input,
digitalTVandAnalogTV.
Available for VHF-H 174~230MHz, and UHF
470~860MHz.
Built –in regargeable battery makes it suitable for
ourdoor use.
A/Voutputisincluded.
2201
FCC
FCC Caution:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
FCC Notes:
The manufacturer is not responsible for and radio or
TV interference caused by unauthorized
modifications to this equipment. Such modifications
could void the user's authority to operate the
equipment.
Precaution
,,
Thanks on your purchase of the 7 Wireless LCD
TV. Please read the directions to familiarize
yourself with the product and to ensure that you
obtain from your equipment.
Pleasedon’tputthedisplayinairtightvehicles
and keep away from the sunlight and heaters.
Using the unit over 30 C will cause insufficient
charging.
Usingtheunitunder0Corhigherthan40Cmay
damage the TV but it will work in normal in
operation temperature.
Please pull out the power plug of display after
charing or watching . It is dangerous to keeping
plug in and also may cause the TV damage .
,
It s not recommended to be long time used in
highly humidity environments, for example:
bathroom, shower room.
NOTE: The antenna is cemented to the
device. Changes or modifications to this unit not
expressly approved by the party responsible for
compliance will void the user's authority to
operate the equipment. Any change to the
equipment will void FCC grant.
Pleasedon’tputthedisplayinthewaterorthe
place easliy dropping into the water.
It can use 3hr after charging aroud 5~8hr.
(the operating time relates to the reception,
volume and local channel)
Don’t connect to AC adaptor when using the TV
in bathroom, shower room.
Please keep away from water when the connector
coverisopen.
Don’tconnecttheantennaandplugofACadaptor
when thundering.
0213
The distance of transmission in unobstructed
place is 30m.
Thesignalof inmountaindistrict,
transmission
underground passages , airtight building may be
interrupted.
Reinforced concrete building , the inference of
electromagnetic wave , airtight building will
influence the reception of wireless transmission.
Connector cover and the cover of remote control
are the most important components to keep the
TV away from water . Please fix it tightly and
make sure there is not any tiny impuruties
around the cover.
PleaseturnofftheTVimmediatelyifsmokesand
smells something bad, and unplug the AC
adaptor, then contact with your retailer.
Please note the transmitter box isn’t waterpoof.
MUTE
Adjust the vide output to mute
function.
DEFAULT EXIT
Return to the original setting of
manufactory by pressing the
or .
+
-
MUTE OFF
DEFAULT EXIT
03
,
Don t reconstruct and separate the TV. Any
problems, please contact with your retailer for
inspection, adjustment and repair.
Avoid any silts fall into the speaker.
Don’taddpressuretotheLCDpanelandhitthe
TV set.
Please turn the unit off to start charging.
Please use the cotton cloth for screen to clean
the display , in case scrape the screen .
12
Content of OSD function
BRIGHTNESS
Adjust the brightness of screen.
Adjustment range 0~20
BRIGHTNESS
20
Specifications
ITEM
Screen size
Display Resolution
Brightness
SPECIFICATION
7.0
inch
480x3(RGB)(H) x 234(V)
400
(cd/m )
2
CONTRAST
Adjust the contrast of screen.
Adjustment range 0~20
SHARPNESS
Adjust the sharpness of screen.
Adjustment range 0~6
SATURATION
Adjust the saturation of screen.
Adjustment range 0~20
CHANNEL
Adjust the channel A/B/C/D.
CONTRAST
SHARPNESS
SATURATION
Viewing Angle
Top=60 Bottom=20
Left=60 Right=60
Video source
11
Power input
Weight
Dimension(RX)
Dimension
3
The charging time
(TX)
The operating time
Battery type
Antenna type
Receive range
channel frequency
10
R/C frequency
Certification
Analog TV
Video input
DC 12V__2A DC 12V__3A(TX)
0.9kg 10g 0
240(L)x68(D)x132(H)
303 6 D 56 H
(L)x1 3( )x ( ) mm
(NTSC/PAL/SECAM)
(RX)
(RX) .5kg 30g(TX)
mm
Around 3~4hr
Around 2.5hr
3000mah Ni-Mh battery
2.4GHz swivel antenna(2dBi/50ohm typ.)
30m (Outdoor no interference)
chA: 2414 MHz chB: 2432 MHz
chC: 2450 MHz chD: 2468 MHz
RF 433 MHz
CE FCC Ver FCC ID RoHS IPX6
11
CHANNEL A
04
Parts Description-Main Unit
Monitor
Remote Control
Display
Speaker
Power LEDPower LED
Power
Antenna
Battery LEDBattery LED
Flash indicator of
charging.
UP/DOWN
Volume (+/-)
Volume (+/-)
MENU
Accesses the OSD.
EXIT
AV CableOut
AC-Adaptor
05
CHANNEL A/B/C/DCHANNEL A/B/C/D
Avoid the interference
of wireless air waves.
ANTENNA
TV Cable
AV In Cable
CABLE-TV
10
Instruction
TV
Serial Number Sticker
Serial Number Sticker
Locker
Fix the connector cover
tightly.
Earphone JackEarphone Jack
AV OUT
AV OUT
Video output.
Charge
EARPHONE
Receive range
(
AC-Adaptor
Outdoor no interference)
30m
VCD/DVD PLAYER
POWER ON/OFFPOWER ON/OFF
Please always charge the
unit when power off, to
D
DC
C
Jack
Jack
avoid damaging the
batteries.
EXIT
DC JackDC Jack
12V DC Power Adaptor
FOUR CHANNELS
Socket.
Connector coverConnector cover
Keep away water into the
sockets and switch.
Note
Connector cover is the most important
component to keep away water into W070X3,
please make sure it was fixed tightly.
09
06
Transmission BOX
VIDEO SELECTVIDEO SELECT
CHANNEL
Remote Control
ANALOG SCANANALOG SCAN
Please press 3 seconds
to auto scan analog TV.
Analog TV LEDAnalog TV LED
ANTENNA
CHANNEL A/B/C/DCHANNEL A/B/C/D
Avoid the interference
of wireless air waves.
07
Show OFF is power off.
A/V input LEDA/V input LED
A/V outputA/V output
A/V inputA/V input
DC jackDC jack
Pad
Analog TV connectionAnalog TV connection
PAL or NTSC .
12V-4ADC Power
Adaptor Socket.
Power
Power on/offPower on/off
1
23
4
5
12
6
7
8
13
9
10
Front Back
1 POWER
1 POWER
MENU
2 MENU
2
Accesses the Digital TV menu.
3
3 EXIT
EXIT
Exit the Digital TV menu.
4 Channel (MENU up/down)
4
Channel (MENU up/down)
5OK
OK
5
6 Volume (MENU left/right)
Volume (MENU left/right)
6
ANALOG SCAN
7 ANALOG SCAN
7
Please press 3 seconds to
auto scan Analog TV.
11
8 VIDEO SELECT
8 VIDEO SELECT
Switching TV or AV.
9 Number Buttons
9
Number Buttons
Select TV channel numbers.
10 Return
10
Return
Return before channel.
11 Enter
11
Enter
Accesses TV channel.
12 Serial Number Sticker
12
Serial Number Sticker
13 Battery cover
Battery cover
13
08
Loading...