Riedel NSA-002A User Manual
NSA-002A
User Manual
A00
04-371HB01EG
04-371HB01EG-A00
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Riedel may void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
The device conforms to the following EU guidelines
as attested by the CE mark.
·
EMV (EMC) 2014/30/EU
·
NSR (LVD) 2014/35/EU
Industry Canada:
CAN ICES-3 (A)/NMB-3(A)
CAN ICES-3 (B)/NMB-3(B)
Standards:
·
EN 55032:2016-02
·
EN 55103-2:2010-07
·
EN 60950-1:2014-08
·
EN 62368-1:2016-05
NSA-002A User Manual
© January 2019 Riedel Communications GmbH & Co. KG. ALL RIGHTS RESERVED.
UNDER THE COPYRIGHT LAWS, THIS MANUAL MAY NOT BE COPIED, IN WHOLE OR IN PART, WITHOUT THE WRITTEN CONSENT OF RIEDEL. EVERY
EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS MANUAL IS ACCURATE. RIEDEL IS NOT RESPONSIBLE FOR PRINTING OR
CLERICAL ERRORS. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
NSA-002A User Manual A00
CONTENT
Preface 41
About NSA-002A 82
Getting started 123
Web Interface 164
Information .............................................................................................................................................. 51.1
Safety Instructions ................................................................................................................................... 61.2
Product Elements .................................................................................................................................... 82.1
Status LEDs ............................................................................................................................................... 92.2
Ports / Pinouts ....................................................................................................................................... 102.3
Mounting Options ................................................................................................................................. 123.1
Connecting Interfaces ........................................................................................................................... 123.2
Powering the Unit .................................................................................................................................. 133.3
Operation Mode .................................................................................................................................... 143.4
Stream consumer .................................................................................................................................. 174.1
Stream provider ..................................................................................................................................... 184.2
General settings .................................................................................................................................... 194.3
Advanced ................................................................................................................................................ 204.4
Appendix 215
Technical Drawing ................................................................................................................................. 215.1
Technical Specifications ........................................................................................................................ 225.2
Riedel-NMOS-Explorer .......................................................................................................................... 235.3
Service .................................................................................................................................................... 245.4
Notes ...................................................................................................................................................... 255.5
Index .................................................................................................................................................................... 26
1 Preface
CHM
"Compiled HTML Help" is the standard format for Windows online help and .Net applications
EPUB
"Electronic Publishing format" is a cross-platform e-book standard
Thank you for choosing a Riedel product.
This PDF document provides detailed information about the NSA-002A, pin outs, mechanical and electrical data.
This manual is available in additional formats:
For further information, please refer to the Riedel Website or contact your local distributor or the Riedel
headquarters in Wuppertal.
NOTICE
This manual, as well as the software and any examples contained herein are provided “as is” and are subject to change without
notice. The content of this manual is for informational purpose only and should not be construed as a commitment by Riedel
Communications GmbH & Co. KG or its suppliers. Riedel Communications GmbH & Co. KG gives no warranty of any kind with
regard to this manual or the software including, but not limited to the implied warranties of merchantability and fitness for a
particular purpose. Riedel Communications GmbH & Co. KG shall not be liable for any errors, inaccuracies or for incidental or
consequential damages in connection with the furnishing, performance or use of this manual, the software or the examples
herein. Riedel Communications GmbH & Co. KG reserves all patent, proprietary design, title and intellectual property rights
contained herein, including, but not limited to, any images, text, photographs incorporated into the manual or software.
All title and intellectual property rights in and to the content that is accessed through use of the products is the property of the
respective owner and may be protected by applicable copyright or other intellectual property laws and treaties.
NSA-002A User Manual A00
4
NSA-002A User Manual A00
The following tables are used to indicate hazards and provide cautionary information in relation to the
handling and use of the equipment.
Danger
!
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
The highlighted line indicates the activity to prevent the danger.
Warning
!
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
The highlighted line indicates the activity to prevent the danger.
Caution
!
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices.
The highlighted line indicates the activity to prevent the danger.
This text is for generally information. It indicates the activity for ease of work or for better
understanding.
1.1 Information
Symbols
5
1.2 Safety Instructions
·
The power cable should only be connected to a correctly grounded source.
·
Do not use any adapters.
·
Never bypass a ground contact.
Caution
!
·
To shut down the unit completely, remove the power cord and both Ethernet cables.
·
Pour éteindre complètement l'appareil, débranchez le cordon d'alimentation et les deux
câbles Ethernet.
Warning
!
·
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
·
Apparatet må tilkoples jordet stikkontakt.
·
Apparaten skall anslutas till jordat uttag.
·
Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til
stikproppens jord.
Danger
!
To reduce the risk of electric shock do not remove cover or expose the products to
rain or moisture.
·
All service has to be undertaken only by qualified Riedel service personnel.
·
Do not plug in, turn on or attempt to operate an obviously damaged device.
·
Never attempt to modify the equipment components for any reason.
Caution
!
All adjustments have been done at the factory before the shipment of the devices. No
maintenance is required and no user serviceable parts are inside the module.
·
Never place the devices in areas of high dust particles or humidity.
·
Be aware of the operating temperature of the systems (0°C – +50°C).
·
Never place containers with any liquids on top of the devices.
·
If the equipment has been exposed to a cold environment and transferred to a warm environment,
condensation may form inside the housing. Wait at least 6 hours before applying any power to the
equipment.
Voltage
NSA-002A User Manual A00
Service
Environment
6
NSA-002A User Manual A00
Disposal of old Electrical & Electric Equipment (Applicable throughout the European Union and other
European countries with separate collection programs).
This symbol, found on your product or on its packaging, indicates that this product should
not be treated as household waste when you wish to dispose of it. Instead, it should be
handed over to an applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which could
otherwise be caused by inappropriate disposal of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about the recycling
of this product please contact your local city office.
Disposal
7
2 About NSA-002A
figure 1: NSA-002A (front)
figure 2: NSA-002A (back)
Analog 4-wire inputs (XLR3)
6x Analog 4-wire outputs (XLR3)
6x
Mode button
1x
GPI – inputs (D-Sub-9, female)
3x
Ethernet connectors (RJ45, PoE)
2x
Power supply (mains input)
1x
Status LEDs
3x
GPO – outputs (D-Sub-9, male)
3x
The NSA-002A (Network-Steam-Adapter) is a device to convert analog audio signals to AES67 and vice versa. That
means analog audio sources can be integrated into AES67 networks.
The power can be supplied by mains and via the AES67 network if it supports PoE functionality.
2.1 Product Elements
NSA-002A User Manual A00
8
NSA-002A User Manual A00
Device mode
(top)
blue
Bolero mode (plug-and-play mode for Bolero wireless intercom
systems)
violet
Manual mode
State
(middle)
Bolero
plug & play mode
green
Connection OK
green blinking
·
Synchronization errors. (This may happen
during the first 5 min.)
·
Check PTP settings.
·
Audio glitches may happen.
red
Antenna not connected or not configured in
Bolero web server.
orange
All other cases.
Manual mode
green
Connection OK or idle (not configured).
green blinking
Connection configured but no data
communication.
red
Connection configured but mismatch
between sender and receiver.
orange·Synchronization errors. (This may happen
during the first 5 min.)
·
Check PTP settings.
·
Audio glitches may happen.
off
All other cases.
PTP Status
(bottom)
green
PTP slave, PTP offset <1 µs
green blinking
PTP master
orange
PTP slave, PTP offset 1 ... 100 µs
orange blinking
PTP listening, Slave mode only
red·Error
·
PTP offset >100 µs
Network
(left)
off
no connection
green
Ethernet connection ok
Activity
(right)
off
no data transmission
green / yellow
blinking while data transmission
2.2 Status LEDs
9
Loading...