RIEDEL Juggler User Manual

RIEDEL JUGGLER

TETRA Base Station

Integrated TETRA Radio System for Artist Intercoms

Besides wireless intercom systems, wireless communications at events
are usually based on professional mobile radios or digital trunked radios.
While analog radios are easily integrated with the wired intercom system
via the Riedel RiFace, Riedel now provides JUGGLER, a compact TETRA
digital trunked radio network solution for Artist Digital Matrix Intercoms,
which provides seamless integration of wired intercom and professional
digital radio applications.

While digital TETRA radios have been providing many advantages such as
optimal frequency usage, highest transmission quality for audio and data
and maximum security against eavesdropping, TETRA remained unsuitable
for many applications because the installations were large and expensive.
Riedel JUGGLER provides for the fi rst time a cost-effective and compact
solution, which makes it ideal not only for fi xed installations but also mobile
applications and OB trucks.

The new Riedel JUGGLER TETRA solution seamlessly integrates the
TETRA radio network into the wired intercom matrix, providing intelligent
integration between TETRA radio groups and Riedel Artist intercom ports.
The system allows calls from any port/group/conference of the Artist
system to up to 64 individual TETRA radio groups and vice versa. JUGGLER
works with any TETRA-standard compliant subscriber.

The system consists of the JUGGLER Artist Interface, the TETRA Base
Station Controller and the TETRA Base Station. The JUGGLER Artist
Interface connects the TETRA Base Station Controller to any given Riedel
Artist system via MADI. The TETRA system can be set up as a single-site
installation or as a multi-site installation with seamless hand-over.

The IP65 encapsulations of the TETRA Base Station as well as of the TETRA
Base Station Controller ensures reliable operation even in harsh climatic
environments.

MADI

JUGGLER Artist Interface

Ethernet (VoIP)

TETRA
Base Station
Controller

Ethernet (VoIP)

TETRA Base Station

Riedel Communications GmbH & Co. KG | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: [phone] - 90 | Fax: [phone] - 99 99 | www.riedel.net

RIEDEL JUGGLER

Integrated TETRA Radio System for Artist Intercoms

Specications:

JUGGLER
Artist Interface

TETRA
Base Station

TETRA
Base Station

Controller

Frequency Bands (other frequencies on request)

Russia RX=300-310MHz, TX=336-346MHz,

China RX=350-360MHz, TX=360-370MHz,

Public Safety RX=380-390MHz, TX=390-400MHz,

Civil RX=410-420MHz, TX=420-430MHz,

450 MHz RX=450-460MHz, TX=460-470MHz,

FCC RX=805-825MHz, TX=850-870MHz,

Transmitter and Receiver:

TX power at antenna connector 0.5W to 10W TETRA remotely

RX sensitivity -121dBm with diversity

Receiver diversity Dual as standard

Build-in duplexer combines TX and one RX antenna

Time and frequency sync Internal or external GPS

TX power measurement forward and reected

RX sensitivity BER measurement built-in RFTL, -122 to -104dBm

BW=10MHz

BW=5MHz

BW=5MHz

BW=5MHz

BW=5MHz

BW=14MHz

adjustable

-118dBm without diversity

Interfacing

Interfacing to Artist MADI (Coax or Optical)

Interfacing to JUGGLER Artist Interface RJ45 (Ethernet)

Interfacing to TETRA Base Station Controller RJ45 (Ethernet)

Antenna Connections

Minimum antenna setup One antenna (no diversity)

Normal antenna setup Two antennas (dual diversity)

Antenna setup for two Base Stations Two antennas (dual diversity)

GPS antenna Active (+5V DC) or passive

General

Power requirements 85 – 265 V AC / 47 – 63 Hz 100 – 240 V AC / 47 – 63 Hz 48 V DC

Power consumption 120 VA 20 VA 75 W @ 10W TETRA (typical)

H x W x D 88 x 483 x 230 mm

Mass (incl. mounting accessories) 2.4 kg 20 kg 9 kg

Operating temperature -20

Encapsulation Standard 19"-rack-mount IP65 IP65

Riedel Communications GmbH & Co. KG | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: [phone] - 90 | Fax: [phone] - 99 99 | www.riedel.net

(2 RU x 19" x 9")

0

to +550 Celsius -200 to +550 Celsius -250 to +550 Celsius

375 x 283 x 215
(incl. mounting bracket)

(provided by base station controller)

333 x 246 x 165 mm
(incl. mounting bracket)