Riedel AIR E1, AIR E2, AIR D1, AIR D2 Instructions For Use Manual

Riedel Communications GmbH
Uellendahler Str. 353
42109 Wuppertal
Germany

www.riedel.net

March 2007

AIR Series Headsets

(E1/E2/D1/D2)

Instructions for use

AIR Series

Riedel Communications’ AIR series headset is the ideal light weight, low
prole headset for customers who place great demands on quality, design and
comfortable wearing.

Replacing the Ear Cushion

Hold the earpiece and pull the
cushion off. Place the new cushion
on the earpiece and click it carefully
into place.

The specially engineered DuPont
CoolMax® bers used in Riedel’s ear
cushions provide great breathability
and comfortable wearing.

Personalization

You can put a name plate in the inside of the headband. Just lift the plastic cover,
insert your label, and click it back into place.

Pin Out

XLR 4F
Black GND / Screen 1

Red Microphone 2

Blue Speaker - 3

White Speaker + 4

Specications

Headphone AIR (E1/E2) AIR (D1/D2)
Transducer type Dynamic, open Dynamic, open

Frequency response 100 Hz – 18 kHz 100 Hz – 18 kHz

Impedance 150 Ω 1 mW/1 kHz 150 Ω 1 mW/1 kHz

Characteristic SPL 91 dB 1 mW/1 kHz 91 dB 1 mW/1 kHz

Microphone
Transducer type NC Electret NC Dynamic

Polar pattern Bi-Directional Hypercardioid

Frequency response 150 Hz – 15 kHz 150 Hz – 10 kHz

Nominal Impedance >1600 Ω 200 Ω

Supply voltage 4.5 V 400 µA ---

Sensitivity

-51 dB +/-2 dB
(0 dB=1 V/Pa, 1 kHz)

-62 dB +/-4 dB
(0 dB=1 V/Pa, 1 kHz)

Spare Parts and Service

Please contact your local dealer or Riedel Service (www.riedel.net) for spare parts
and/or service enquiries.

Manufacture Declaration

CE Approval

Riedel Communications declares that this device is in compliance with the
applicable CE standards and regulations.

WEEE Declaration

Please dispose of this product by bringing it to your local collection point or
recycling center.