RIDGID R860430, R860430TH Operator's Manual
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT
JOBSITE BLOWER
SOUFFLANTE
DE SITE DE TRAVAIL 18 V
SOPLADORA
DE SITIO DE TRABAJO DE 18 V
R860430/R860430TH
To register your RIDGID®
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre produit
s’il vous plaît la visite: http://
de RIDGID®, por favor visita:
de RIDGID®,
register.RIDGID.com
Para registrar su producto
http://register.RIDGID.com
INCLUDES: Blower, Blower Tube, Operator’s
Manual
****************
TABLE OF CONTENTS
Important Safety Instructions .......... 2-3
Symbols ........................................... 4-5
Features ...............................................5
Assembly .............................................6
Operation .............................................7
Maintenance ........................................8
Illustrations .................................... 9-10
Parts Ordering/
Service ................................ Back page
WARNING:
To reduce the risk of injury, the
user must read and understand the
operator’s manual before using this
product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
INCLUT: Soufflante, tube de soufflante, manuel
d’utilisation
****************
TABLE DES MATIÈRES
Règles de sécurité importantes ....... 2-3
Symboles ......................................... 4-5
Caractéristiques ..................................5
Assemblage .........................................6
Utilisation .......................................6-7
Entretien ..............................................8
Illustrations .................................... 9-10
Commande de pièces
et réparation ...................... Page arrière
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’utiliser ce produit.
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUYE:
manual del operador
Instrucciones importantes de
Símbolos .........................................4-5
Características ................................... 5
Armado ............................................... 6
Funcionamiento ............................... 6-7
Mantenimiento .................................... 8
Ilustraciones ..................................9-10
Pedidos de piezas
Sopladora, tubo de la sopladora,
****************
ÍNDICE DE CONTENIDO
seguridad ........................................ 2-3
y servicio ........................Pág. posterior
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar
este producto.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should
always be followed, including the following:
WARNING!
READ AND UNDERSTAND ALL SAFETY
WARNINGS AND INSTRUCTIONS BEFORE
USING THIS BLOWER. To reduce the risk of
electric shock, fire and/or serious personal
injury.
Know your power blower. Read operator’s manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
blower. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
Do not permit children to use blower. It is not a toy.
Close attention is necessary when used near children.
Use only accessories that are recommended by the
manufacturer for your model described in this manual.
Accessories that may be suitable for one blower may
create a risk of injury when used on another blower. Use
only as described in this manual.
Do not handle charger, including charger plug, and
charger terminals with wet hands.
Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.
Do not charge the unit outdoors.
Keep hair, loose clothing, fingers, and all parts of body
away from openings and moving parts.
Turn off all controls before removing battery.
Use extra care when cleaning on stairs or steps.
Do not operate blowers in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Blowers create sparks which may ignite the dust
or fumes.
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Keep bystanders, children, and visitors at least 50 ft.
away while operating a blower. Distractions can cause
you to lose control.
A battery operated blower with integral batteries or
a separate battery pack must be recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may create a risk
of fire when used with another battery.
Use battery operated blower only with specifically
designated battery pack. Use of any other batteries may
create a risk of fire.
Use only with charger listed. For use with 18V lithium-
ion battery packs, see tool/appliance/battery pack/
charger correlation supplement 988000-302.
Do not operate charger with a damaged cord or plug,
which could cause shorting and electric shock. If
damaged, have the charger replaced by an authorized
service center.
If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water, return it to a service center.
Stay alert, watch what you are doing and use
common sense when operating a power blower. Do
not use blower while tired, upset, or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating blowers may result in serious
personal injury.
Secure long hair above shoulder level to prevent
entanglement in moving parts.
Avoid accidental starting. Be sure switch is in the locked
or off position before inserting battery pack. Carrying
blowers with your finger on the switch or inserting the battery pack into a blower with the switch on invites accidents.
Use safety equipment. Always wear eye protection.
Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder, rooftop, tree, or other unstable
support. Stable footing on a solid surface enables better
control of the blower in unexpected situations.
Do not use blower if switch does not turn it on or off.
A blower that cannot be controlled with the switch is
dangerous and must be repaired by an authorized service
center or replaced.
Disconnect battery pack from blower before making
any adjustments, changing accessories, or storing the
blower. Such preventive safety measures reduce the risk
of starting the blower accidentally.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause sparks, burns,
or a fire.
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the blower’s operation. If damaged, have the
blower serviced before using. Many accidents are
caused by poorly maintained blowers.
Keep the blower and its handle dry, clean and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleumbased products, or any strong solvents to clean your
blower. Following this rule will reduce the risk of loss of
control and deterioration of the enclosure plastic.
2 — English
IMPORTANT SAFETY INSTRUCTIONS
Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses. They
are NOT safety glasses. Following this rule will reduce
the risk of eye injury.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1 along with hearing protection when operating this equipment.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
Protect your hearing. Wear hearing protection during
extended periods of operation. Following this rule will
reduce the risk of serious personal injury.
Battery powered blowers do not have to be plugged
into an electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery powered blower or when
changing accessories. Following this rule will reduce the
risk of electric shock, fire, or serious personal injury.
Do not place battery powered blowers or their batter-
ies near fire or heat. This will reduce the risk of explosion
and possibly injury.
Don’t expose blowers to rain or wet conditions. Water
entering a blower will increase the risk of electric shock.
Wear heavy long pants, long sleeves, boots, and
gloves. Avoid loose garments or jewelry that could get
caught in moving parts of the machine or its motor.
Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
Check the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or string
which can be thrown or become entangled in the machine.
Do not point the blower nozzle in the direction of
people or pets.
Never run the unit without the proper equipment
attached. Always ensure the blower tubes are installed.
When not in use, blower should be stored indoors in
a dry, locked up place—out of the reach of children.
Do not hang unit so that the switch trigger is
depressed.
Keep all bystanders, children, and pets at least 50 ft.
away.
Do not dispose of a severely damaged or worn out
battery pack or this blower by incinerating. The battery
can explode in fire.
Blower service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.
When servicing a blower, use only identical replace-
ment parts. Follow instructions in the Maintenance sec-
tion of this manual. Use of unauthorized parts or failure
to follow Maintenance Instructions may create a risk of
shock or injury.
Never use blower near fires, fireplaces, hot ashes,
bar becue pits, etc. Use near fires or ashes can spread
fires and result in serious injury and/or property damage.
Never use blower to spread chemicals, fertilizers,
or any other toxic substances. Spreading these sub-
stances could result in serious injury to the operator or
bystanders.
Never place blower on any surface, except a hard,
clean surface when motor is running. Gravel, sand,
and other debris can be picked up by the air inlet and
thrown at the operator or bystanders, causing possible
serious injuries.
Store indoors.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Do not use a battery pack or appliance that is dam-
aged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion
or risk of injury.
Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also.
SAVE THESE INSTRUCTIONS
3 — English
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s Manual
Eye and Hearing Protection
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 along with hearing protection when operating
this equipment.
Impeller Blades Rotating impeller blades can cause severe injury.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Long Hair
Blower Tube Do not operate without tube in place.
Loose Clothing
Ricochet
Recycle Symbol
Failure to keep long hair away from the air inlet could result in
personal injury.
Failure to keep loose clothing from being drawn into air intake
could result in personal injury.
Thrown objects can ricochet and result in personal injury or property
damage.
This product uses lithium-ion (Li-ion) batteries. Local, state or
federal laws may prohibit disposal of batteries in ordinary trash.
Consult your local waste authority for information regarding available
recycling and/or disposal options.
4 — English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
min Minutes Time
Direct Current Type or a characteristic of current
n
o
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
No Load Speed Rotational speed, at no load
FEATURES
PRODUCT SPECIFICATIONS
Motor ..................................................................................................................................................................... 18 Volts DC
Air Velocity .................................................................................................................................................................100 MPH
Air Volume .................................................................................................................................................................280 CFM
KNOW YOUR BLOWER
See Figure 1, page 9.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLOWER TUBE
The blower tube can be installed on the blower without
using any tools.
OVERMOLD HANDLE
Ergonomic handle with overmold improves comfort and grip.
5 — English
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this
bled to the product by the manufacturer and
require customer installation. Use of a product
that may have been improperly assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
Assembly
section are not assem-
WARNING:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Use of this product with damaged or missing
parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
blower. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery pack from the tool when assembling parts.
ASSEMBLING THE BLOWER TUBE
See Figure 2, page 10.
With the latch slot facing up, slide the blower tube over
the outlet on the blower housing.
Press down on the tab on the blower housing outlet.
Push tube on the blower housing outlet until tab locks
into place through the slot in the blower tube.
To remove the blower tube, push tab down and slide tube
off.
6 — English
OPERATION
WARNING:
Do not allow familiarity with products to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
hearing protection. Failure to do so could result
in objects being thrown into your eyes resulting
in possible serious injury.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the purposes listed below:
Clearing hard surfaces such as driveways and walkways
Keeping jobsite area free from residual dusts and other
light debris
TO INSTALL/REMOVE BATTERY PACK
See Figure 3, page 10.
WARNING:
Always remove battery pack from your tool
when you are assembling parts, making adjustments, cleaning, or when not in use. Removing
battery pack will prevent accidental starting that
could cause serious personal injury.
To install:
Insert the battery pack into the product as shown.
Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in the
product before beginning operation.
WARNING:
Make sure the latches on the sides of the battery
pack snap in place and the battery pack is fully
seated and secure in the blower battery port
before beginning operation. Failure to securely
seat the battery pack could cause the battery
pack to fall out, resulting in serious personal
injury.
To remove:
Depress the latches and remove the battery pack.
WARNING:
Battery tools are always in operating condition.
Therefore, switch should always be in the OFF
position when not in use or carrying at your
side. Remove battery pack when transporting
or carrying blower to avoid accidental starting,
which could result in serious injury.
For complete charging instructions, refer to the Operator’s
Manuals for your RIDGID battery pack and charger models.
STARTING/STOPPING THE BLOWER
See Figure 4, page 10.
To start the blower, depress the switch trigger.
To stop the blower, release the switch trigger.
OPERATING THE BLOWER
See Figure 5, page 10
To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the center
of a pile.
To reduce sound levels, limit the number of pieces of
equipment used at any one time.
Use rakes and brooms to loosen debris before blowing.
Conserve water by using power blowers instead of hoses for
many lawn and garden applications, including areas such
as gutters, screens, patios, grills, porches, and gardens.
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
After using blowers or other equipment, CLEAN UP!
Dispose of debris properly.
7 — English
WARNING:
Battery tools are always in operating condition.
Therefore, switch should always be in the OFF
position when not in use or carrying at your side.
MAINTENANCE
WARNING:
When servicing, use only identical replacement
parts. Use of any other parts can create a hazard
or cause product damage.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
hearing protection. Failure to do so could result
in objects being thrown into your eyes resulting
in possible serious injury.
WARNING:
To avoid serious personal injury, always remove
the battery pack from the product when cleaning or performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils,
etc., come in contact with plastic parts. Chemicals can damage, weaken ordestroy plastic
which can result in serious personal injury.
STORAGE
Clean all foreign material from the blower.
Store indoors in a secure place that is inaccessible to
children. Keep away from corrosive agents such as garden chemicals and de-icing salts.
Do not hang unit so that the switch trigger is depressed.
NOTE: ILLUSTRATIONS START ON PAGE 9
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
as well as a Three-year Limited Warranty. For Warranty and Policy details,
please go to www.RIDGID.com or call (toll free) 1-866-539-1710.
8 — English
RÈGLES DE SÉCURITÉ IMPORTANTES
En utilisant un appareil électrique, précautions fondamentales
toujours devraient être suivies, y compris le suivre :
AVERTISSEMENT !
LIRE ET COMPRENDRE LES AVERTISSEMENTS
ET LES INSTRUCTIONS DE SÉCURITÉ AVANT
D’UTILISER CETTE SOUFFLERIE. Pour réduire
le risque de décharge électrique, et/ou de feu
blessure personnelle sérieuse.
Apprendre à connaître l’outil. Lire attentivement le manuel
d’utilisation. Apprendre les applications et les limites de
l’outil, ainsi que les risques spécifiques relatifs à son
utilisation. Le respect de cette consigne réduira les risques
d’incendie, de choc électrique et de blessures graves.
Interdire l’utilisation du souffleur aux enfants. Ce n’est
pas un jouet. Une surveillance étroite est impérative lorsqu’il
est utilisé à proximité d’enfants.
Utiliser exclusivement les accessoires recommandés
par le fabricant pour le modèle d’outil concerné décrit
dans ce manuel. Des accessoires appropriés pour un outil
peuvent être dangereux s’ils sont utilisés avec un autre.
Utiliser exclusivement selon les instructions de ce manuel.
Ne pas manipuler le chargeur, la fiche du chargeur et les
bornes du chargeur avec des mains humides.
Ne pas insérer d’objet dans les ouvertures. Ne pas
utiliser si une ouverture est bloquée ; veiller à ce que
les ouvertures ne soient jamais obstruées par de la
poussière, de la peluche, des cheveux ou quoi que ce
soit risquant de réduire le flux d’air.
Ne pas charger l’appareil à l’extérieur.
Garder les cheveux, les vêtements amples, les doigts et
toute autre partie du corps à l’écart des ouvertures et
pièces en mouvement.
Désactiver toutes les commandes avant de retirer la pile.
Faire preuve d’une grande prudence lors du nettoyage
des escaliers et des marches.
Ne pas utiliser d’outils dans des atmosphères explosives,
en présence de liquides, de gaz ou de poussières
inflammables par exemple. Les outils motorisés produisent
des étincelles qui risquent d’enflammer les poussières ou
les vapeurs.
Garder le lieu de travail propre et bien éclairé. Les établis
encombrés et les endroits sombres sont propices aux
accidents.
Éloigner les badauds, enfants et visiteurs à une distance
d’au moins 15 m (50 pi) pendant l’utilisation d’un outil
motorisé. Les distractions peuvent causer une perte de
contrôle.
Les piles d’outils motorisés, qu’elles soient intégrées
ou amovibles, ne doivent être rechargées qu’avec le
chargeur spécifié. Un chargeur approprié pour un type de
pile peut créer un risque d’incendie s’il est utilisé avec un
autre type de pile.
Utiliser exclusivement le bloc de pile spécifiquement
indiqué pour l’outil. L’utilisation de toute autre pile peut
créer un risque d’incendie.
Ne recharger qu’avec l’appareil indiqué. Pour utiliser
l’appareil avec des piles au lithium-ion de 18 V, consulter
le supplément de raccordement pour chargeur/outils/piles/
appareil n˚ 988000-302.
Ne pas utiliser une chargeur dont la prise ou le cordon
sont endommagés au risque de causer un court-circuit et
un choc électrique. Le cas échéant, faire remplacer la prise
ou le cordon immédiatement par un centre de réparations
agréé.
Si l’appareil ne fonctionne pas correctement, s’il a été
échappé, s’il est endommagé, s’il a été laissé à l’extérieur
ou s’il est tombé dans l’eau, retourner le produit au centre
de réparations.
Rester attentif, prêter attention au travail et faire preuve
de bon sens lors de l’utilisation de tout outil motorisé.
Ne pas utiliser cet outil en état de fatigue, vexé ou sous
l’influence d’alcool, de drogues ou de médicaments. Un
moment d’inattention pendant l’utilisation d’un outil motorisé
peut causer des blessures graves.
Attacher les cheveux longs pour les maintenir au-dessus
des épaules, afin qu’ils ne se prennent pas dans les
pièces en mouvement.
Éviter les démarrages accidentels. S’assurer que la
commande est verrouillée en position d’arrêt avant
d’insérer le bloc-piles. Le transport d’outils avec le doigt
sur la commande ou l’insertion du bloc de pile avec la
commande en position de marche présente un risque
d’accident.
Utiliser un équipement de sécurité. Toujours porter des
lunettes de protection. Suivant les conditions, le port d’un
masque filtrant, de chaussures de sécurité, d’un casque ou
d’une protection auditive est recommandé.
Ne porter ni vêtements amples, ni bijoux. Attacher ou
couvrir les cheveux longs. Les vêtements amples, les
bijoux et les cheveux longs peuvent se prendre dans les
ouïes d’aération.
Ne pas utiliser sur une échelle, le dessus de toit, l’arbre
ou un support instable. Une position stable sur une surface
ferme permet de mieux contrôler l’outil en cas de situation
imprévue.
Ne pas utiliser l’outil si la commande ne permet pas de
le mettre en marche ou de l’arrêter. Un outil qui ne peut
pas être contrôlé par sa commande est dangereux et doit
être réparépar un centre de réparations agréé ou remplacé.
Déconnecter le bloc-piles avant d’effectuer des réglages,
de changer d’accessoire ou de remiser l’outil. Ces
mesures de sécurité réduisent les risques de démarrage
accidentel de l’outil.
Lorsque le bloc-piles n’est pas utilisé, le tenir à l’écart
d’objets métalliques tels que : les attaches trombones, les
pièces de monnaie, les clous, les vis et les autres petits
objets métalliques risquant d’établir le contact entre les
deux bornes. La mise en court-circuit des bornes de piles
peut causer des étincelles, des brûlures ou un incendie.
Vérifier qu’aucune pièce mobile n’est mal alignée ou
bloquée, qu’aucune pièce n’est brisée et s’assurer
qu’aucun autre problème ne risque d’affecter le bon
fonctionnement de l’outil. En cas de dommages, faire
réparer l’outil avant de l’utiliser de nouveau. Beaucoup
d’accidents sont causés par des outils mal entretenus.
2 — Français
Loading...