Page 1
PIPE/TUBE CUTTING & PREPARATION
Pipe/Tube Cutting & Preparation
• Wide selection from a single source.
• Durable designs.
• Exclusive features for maximum productivity.
Type
No. of
Models
Pipe Capacity
in. mm
Page
Pipe Reamers
Reamers 4
1
⁄4 - 4 8 - 100 3.2
Pipe Cutters
Heavy-Duty 7
4-Wheel 2
Wide Roll 1
Hinged 11 2 - 12 50 - 300 3.3
Soil Pipe 5 1
Replacement Cutter Wheels 21
Power Pipe Cutting
Copper / Stainless Cut & Prep
Tubing Cutters
Replacement Cutting Wheels
Plastic and Multilayer Cutters
Reamers, Deburring Tools
4 2
1
33
21
8
7
1
⁄8 - 6 3 - 150 3.2
3
⁄4 - 4 20 - 100 3.3
1
⁄8 - 2 3 - 50 3.3
1
⁄2 - 8 40 - 200 3.4
_ _
1
⁄2 - 12 65 - 300 3.6
1
⁄2 - 2 12 - 60 3.8
1
⁄8 - 65⁄8 3 - 171 3.10
1
⁄8 - 65⁄8 3 - 171 3.13
1
⁄8 - 23⁄8 3 - 60 3.14
1
⁄4 - 4 6 - 100 3.17
3.5
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.1
Page 2
PIPE/TUBE CUTTING & PREPARATION
Pipe Reamers
No. 254
Pipe Cutters
No. 2-S
No. 2
Pipe Reamers
• Model 2-S Spiral Ratchet Reamer – Self-feeding spiral design for extra-fast and easy hand reaming.
Model 2-S Reamer is not suitable for power reaming.
• Models 2 and 3 Ratchet Reamers – Long taper design will not dig in. Suitable for use with power
drives.
• Model 254 Spiral Ratchet Reamer – Hollow center reduces weight. Large pressure plate. Hardened
alloy steel cone removable for sharpening. Not suitable for power reaming.
Catalog
No.
34955 2-S Spiral Reamer
34945 2 Straight Reamer
34950 3 Straight Reamer
34960 254 Spiral Reamer 2
Note: All reamers include handle.
Model
No.
Description
Cutters
Capacity Weight
in. mm lb. kg
1
⁄4 - 2 6 - 50 71⁄4 3,3 1 35020
1
⁄8 - 2 3 - 50 7 3,2 1 34975
3
⁄8 - 3 9 - 75 111⁄2 5,2 1 35090
1
⁄2 - 4 62 - 100 14 6,4 1 35135
Std.
Pack
Replacement
Cone Cat. No.
Pipe Cutter
Selection
Steel / Stainless
Heavy-Wall Steel
Material / Diameter
Cast Iron –– –– –– –– –– –– –– ––
Heavy-Duty 4-Wheel Wide-Roll Hinged Soil Pipe
Page 3.2 Page 3.3 Page 3.3 Page 3.3 Page 3.4
3
1
⁄8" - 6"
(3 - 150 mm)
3
3
⁄4" - 4"
(20 - 100 mm)
3
1
⁄8" - 2"
(30 - 50 mm)
3
2" - 12"
(50 - 300 mm)
3 3 3 3
Heavy-Duty Pipe Cutters
• Fast, clean pipe cutting by hand or power.
• Extra-long shank protects adjustment threads, while an extra-large handle is provided for
quick, easy adjustment.
• Can be converted to 3-wheel cutter by replacing rollers with cutter wheel. The 2A and 4S
models can be ordered as a 3-wheel model for use in areas where a complete turn is not
Nos. 1-A & 2-A
possible.
• Second handle on 3-S, 4-S and 6-S models make two-man leverage possible on large pipe
sizes.
––
––
3
––
1
1
⁄2" - 8"
(40 - 200 mm)
Catalog
No.
32810 1-A Heavy-Duty
32820 2-A Heavy-Duty
32825 2-A 2-A 3-Wheel Heavy-Duty
32830 3-S Heavy-Duty 1 - 3 25 - 80 15 6,9
Nos. 3-S, 4-S & 6-S
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
32840 4-S Heavy-Duty 2 - 4 50 - 100 18 8,2
32845 4-S 4-S 3-Wheel Heavy-Duty 2 - 4 50 - 100 18 8,2
32850 6-S Heavy-Duty 4 - 6 100 - 150 22 10,0
* Pipe capacity = maximum nominal diameter of steel pipe
Model
No.
Pipe Cutter Description
Pipe Capacity*
Nominal Size
in. mm lb. kg
1
⁄8 - 11⁄4 3 - 32 61⁄2 3,0
1
⁄8 - 2 3 - 50 7 3,2
1
⁄8 - 2 3 - 50 7 3,2
Weight
3.2
Page 3
No. 42-A
PIPE/TUBE CUTTING & PREPARATION
4-Wheel Pipe Cutters
• Designed for work in areas where a complete turn is impossible.
• Model 42-A has a short handle for use in confined areas.
• Second handle on Model 44-S makes two-man leverage possible for large pipe sizes.
• Both models are equipped with four heavy-duty wheels.
No. 44-S
No. 202
Catalog
No.
32870 42-A Heavy-Duty 4-Wheel
32880 44-S Heavy-Duty 4-Wheel 2
Model
No.
Pipe Cutter Description
Pipe Capacity**
Nominal Size
in. mm lb. kg
3
⁄4 - 2 20 - 50 63⁄4 3,1
1
⁄2 - 4 65 - 100 20 9,1
Weight
Wide-Roll Pipe Cutter
• Featuring extra-wide rolls, this cutter is especially designed for use with power drives.
• The wide rolls provide for true tracking and cleaner cuts.
Catalog
No.
32895 202 Heavy-Duty Wide Rolls
Model
No.
Pipe Cutter Description
Pipe Capacity**
Nominal Size
in. mm lb. kg
1
⁄8 - 2 3 - 50 8 3,5
Weight
Hinged Pipe Cutters
• Designed for rapid cutting of 2" (50 mm) to 12" (300 mm) steel pipe, heavy-wall steel pipe
and cast-iron pipe.
• The 11 models operate with minimal cutter rotation as necessary for tight quarters.
• Second handle included for 466, 472 and 468 makes two-man leverage possible for large
pipe sizes.
Catalog
No.
73162 424-S* For Steel Pipe 2 - 4 50 - 100 13
74227 424-CI For Cast/Ductile Iron 2 - 4 50 - 100 13
90995 466-D For SML Pipe 3 - 6 80 - 150 29 13,0
83080 466-S* For Steel Pipe 4 - 6 100 - 150 28
83085 466-HWS* For Heavy-Wall Steel Pipe 4 - 6 100 - 150 28
74685 466-CI For Cast-Iron Pipe 4 - 6 100 - 150 28
83145 468-S* For Steel Pipe 6 - 8 150 - 200 33 15,0
83150 468-HWS* For Heavy-Wall Steel Pipe 6 - 8 150 - 200 33
74700 468-CI For Cast-Iron Pipe 6 - 8 150 - 200 33
83165 472-S* For Steel Pipe 8 - 12 200 - 300 41
83170 472-HWS* For Heavy-Wall Steel Pipe 8 - 12 200 - 300 42 19,1
74710 472-CI For Cast-Iron Pipe 8 - 12 200 - 300 42 19,1
* Furnished with X-tra sharp wheel for up to 40% faster cutting.
* *Pipe capacity = maximum nominal diameter of steel pipe
Model
No.
Pipe Cutter Description
Pipe Capacity**
Nominal Size
in. mm lb. kg
Weight
1
⁄2 6,0
1
⁄2 6,0
1
⁄2 13,0
1
⁄2 13,0
1
⁄2 13,0
1
⁄2 15,2
1
⁄2 15,2
1
⁄2 19,0
Three- and four-wheel pipe cutters should only be used when the cutter cannot be rotated completely around the pipe.
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.3
Page 4
PIPE/TUBE CUTTING & PREPARATION
Soil Pipe Cutters
No. 226 In-Place Soil Pipe Cutter
• The RIDGID Model 226 In-Place Soil Pipe Cutter is a compact, lightweight tool designed to cut hub
1½" (40 mm) to 6" (150 mm) and No-Hub® soil pipe in tight quarters.
• Only 17" (43 cm) long, the Model 226 is perfect for cutting cast iron, cement and clay pipe where
space is limited.
• The Model 226 is especially suited for against-the-wall and other tight quarter applications.
• From the Model 226’s compact design to its unique chain latching mechanism, every feature has
been engineered for maximum productivity.
No. 246, 246S, 246L & 248 Soil Pipe Cutters
• Model 246 soil pipe cutters cut 2" (50 mm) to 12" (300 mm) clay, cast-iron or cement pipe.
• Ratchet-action handle parallel to pipe allows for application in minimum width trenches.
• Complete with hand guard to protect operator’s knuckles when cutting.
• Model 248 has larger diameter cutting wheels and a longer handle. Designed to cut up to 18"
(450 mm) concrete / clay pipe.
No. 228 Soil Pipe Assembly Tool
• Handles all 1½" (40 mm) to 8" (200 mm) gasketed soil pipe without extra, loose attachments.
• Easy assembly of Y, tee and elbow fittings, as well as straight lengths from any angle.
• Slim, compact design lets one man assemble even large sizes quickly and easily.
• Removal of handle facilitates vertical and overhead pipe assembly.
Ordering Information
Catalog
69982 226 In-Place Soil Pipe Cutter 1
32900 246 Soil Pipe Cutter 1
14991 246S Soil Pipe Cutter 2 - 8 50 - 200 26 12 1 1*
10531 246L Soil Pipe Cutter 2 - 12 50 - 300 33 15 1 2*
62797 248 Soil Pipe Cutter 2 - 18 50 - 450 42 19 1 63287
32905 228 Soil Pipe Assembly Tool 1
1*= 34575 + 2 x 34570 / 2*= 2 x 34575
Model No. Description
No.
Capacity Weight
in. mm
1
⁄2 - 6 40 - 150 18 8,2 1 33670
1
⁄2 - 6 40 - 150 25 11,3 1 34575
1
⁄2 - 8 40 - 200 223⁄4 10,3 1 –
lb. kg
Std.
Pack
Replmt.
Chain
Cat #
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.4
Page 5
PIPE/TUBE CUTTING & PREPARATION
Pipe Cutter Replacement Wheels
Always use genuine RIDGID cutter wheels. These
wheels are precision-machined from high-grade steel
and are engineered for long life and maximum cutting
accuracy.
83145
468S
Blade Exposure
83150
74710
472C
468HWS
•
83165
472S
83170
472HWS
•
42390/34617
820/364(535/1822)
• • •
LONG LIFE
CUTTER WHEELS
32810
32820
32830
32840
32850
32870
32880
32895
68650
32860
32865
69982
62797
42370
73162
74227
74685
90995
83080
83085
Pipe Cutters
Catalog No.
32900/43547
74700
(Original Product)
Model
3S4S6S
1A
2A
Model No.
Catalog
Model
No.
Standard
No.
33220 E-109 1 9.0
44185 E-1032 6 11.0
44190 E-1032S 6 11.0
10026 E-10817 1 17.5
33135 E-1962 1 6.5
33225 E-2632 1 6.0
83140 E-3186 1 17.0
75557 E-4266 4 16.9
75572 E-2267 4 10.0
33105 F-3 12 7.5
33110 F-3S 6 7.5
33115 F-119 1 3.0
Cutter Wheels
33125 F-229 6 10.0
33130 F-229S 6 10.0
75567 F-366 4 9.5 Steel Pipe
33145 F-367 1 11.5
33150 F-367-S 1 11.5
33155 F-383 1 6.5
33100 F-514 6 7.5
33120 F-515 6 10.0
75562 F-546 4 11.0
63297 AC-1586 1 6.2
Denotes Cutter Wheels furnished with original product. Denotes alternate Cutter Wheel * Blade exposure = Thickness in mm.
•
Pack
Blade
Exp.
• • •
• •
• •
202
206
208
209
226
248
42A
44S
246/266
360
424S
466C
466S
424CI
466D
468C
466HWS
• •
•
•
•
•
•
•
•
• •
• •
•
•
•
•
58657
52452
732(1215)
763(1233)
•
26212
764(1224)
Application/
Material
Cast Iron
Steel Pipe & Ductile Iron
S.S. Pipe
SML Pipe
Grey Cast Iron
Cast Iron
Steel & Ductile Iron HW
Heavy Wall Steel
Cast & Ductile Iron
Steel & Ductile Iron
S.S. Pipe
Grey Cast Iron
Steel & Ductile Iron
S.S. Pipe
Steel & Ductile Iron
S.S. Pipe
Grey Cast Iron
Steel & Ductile Iron
Steel & Ductile Iron
Steel Pipe
Concrete Pipe
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.5
Page 6
PIPE/TUBE CUTTING & PREPARATION
Power Pipe Cutters
Power Pipe Cutter / Model 258
1
2
⁄2" (65 mm) to 8" (200 mm) Diameter Pipe
The RIDGID Model 258 Power Pipe Cutter cuts 2
pipe, galvanized pipe, rigid conduit, etc. at the job site or in the shop. Powered by the RIDGID No. 700
Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the
feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal
burr on either 6 m or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or
open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second
operator uses a grinder to bevel the pipe. Some of the 258 advantages are:
• Square cut 6 m or nipple lengths of pipe without eort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust, dangerous sparks, or open flame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
• Heavy-duty design is perfect for field or shop use.
• Adaptable for beveling.
Specifications
• Cutting Capacity: 2
• Model 700 Power Drive (included with Cat No. 17871 and 17881).
• Power Drive RPM: 26-30 (no load).
• Weight: 105 lbs. (48 kg) (excludes No. 700 Power Drive, see page 4.15).
Standard Equipment
• One RIDGID 774 Square Drive Adapter.
1
• One 8
⁄2" (215 mm) HD Cutter Wheel Assembly.
• One Hydraulic Ram and Foot Pump.
1
• Two 2
⁄2" (65 mm) to 12" (300 mm) Ball Transfer Pipe Supports.
*Use the thin wall cutter wheel for best results.
**Cutting time varies with pipe schedule and diameter.
Note: Model 258 is not recommended to cut cast iron pipe.
For optimum wheel life always properly support the work piece with ball transfer pipe supports (see
accessories on page 3.7).
1
⁄2" (65 mm) to 8" (200 mm) schedule 10*/40 steel pipe.
1
⁄2" (65 mm) to 8" (200 mm) schedule 10*/40 steel
Model 700 ready for mounting on Model 258 Unit, see
page 4.15
Model 258 with Pipe Roller in use for beveling. Two
operators are recommended for this operation
Model 258 Pipe Cutter with No. 700 Power Drive in use
for cutting
Do not overfill the hydraulic pump on power pipe cutters. Excess oil will purge out of seals on pump and ram.
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.6
Page 7
PIPE/TUBE CUTTING & PREPARATION
Power Pipe Cutter / Model 258XL
8" (200 mm) to 12" (300 mm) Diameter Pipe
The RIDGID 258XL oers 8" (200 mm) to 12" (300 mm) diameter pipe cutting capacity. Utilizing
displacement type cutter wheel technology, the design enables larger diameter pipe to be cut to
length. The 258XL also uses the RIDGID 700 Power Drive to rotate the heavy-duty cutter wheel. Now
one person can easily square cut 12" schedule 40 pipe in minutes.
Specifications
• Cutting Capacity: Model 258XL: 8" (200 mm) to 12" (300 mm) schedule 10*/40 steel pipe.
• Model 700 Power Drive (not included) RPM: 26 - 30 (no load).
• Weight: 140 lbs. (63 kg) (excludes No. 700 Power Drive, see page 4.15).
Standard Equipment
• One RIDGID 774 Square Drive Adapter.
1
• One 8
⁄2" (215 mm) H-D Cutter Wheel Assembly.
• One Hydraulic Ram and Foot Pump.
1
• Two 2
⁄2" (65 mm) to 12" (300 mm) Ball Transfer Pipe Supports.
*Use the thin cutting wheel for best results.
Note: For optimum wheel life properly support the work piece with standard ball transfer pipe
supports (see below).
Ball Transfer Pipe Support
Capacity Inches
Catalog
No.
50767 258 Pipe Cutter 2
17871 258 / 700 258 Cutter with No. 700, 230V 2
17881 258 / 700 258 Cutter with No. 700, 115V 2
58227 258-XL Pipe Cutter 8 - 12" — — 145 66 1
Transport Cart
Model No. Description
Accessories
Catalog
No.
66687 – 8
50812 E-258 8½" (215 mm) H-D Cutter Wheel only 2 0,9
58222 E258-T 8½" (215 mm) Thin Wall Cutter Wheel Only (PVC and Steel) 2 0,9
54397 – Transport Cart 24 11,0
60002 258PS Ball Transfer Pipe Support 2
60007 – Replacement Ball Transfer Head Set 5
61757 – Pipe Roller for Beveling (for Model 258 only) 13 5,9
Model No. Description
1
⁄2" (215 mm) H-D Cutter Wheel Assembly
(includes HD Cutter Wheel, hub w/pins, cover plate)
Max. Wall Thickness mm
Steel
8,2
1
⁄2 - 8" 21⁄2 - 8" 21⁄2 - 6" 105 48 1
1
⁄2 - 8" 21⁄2 - 8" 21⁄2 - 6" 125 57 1
1
⁄2 - 8" 21⁄2 - 8" 21⁄2 - 6" 125 57 1
PVC
12,7
1
⁄2" (65 mm) to 12" (300 mm) 21 9,5
Copper
3,1
lb. kg
Weight
Weight
lb. kg
13 5,9
1
⁄2 2,5
Std.
Pack
Pipe Roller For Beveling
(Model 258 Only)
When using 258 and 258XL pipe cutters with long lengths of pipe, it is especially important to properly support the pipe to
prevent cutter wheel damage. Extra pipe supports may be needed and the work area must be level.
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.7
Page 8
PIPE/TUBE CUTTING & PREPARATION
Copper & Stainless Steel Cutting Prep Machine
Model 122 Capacity
1
•
⁄2" (12 mm) to 2" (50 mm).
This machine is designed to cut, clean, ream, and debur copper and stainless steel tubing and fittings
quickly and professionally. Weighing only 23 kg and possessing a conveniently located carrying
handle, the Model 122 is ideal for transport directly to the job site. Rugged cast aluminum housing
and powerful 360 W induction motor assure long life.
Features
• Powerful, 230 V, 360 W induction motor drives rollers at 450 RPM.
• Rugged O.D. cleaning brush cleans tubing quickly with minimal eort.
• Core reamer easily removes turbulence-causing burrs.
• Cutting handle adjusts to accommodate dierent tubing sizes.
• Copper cutter wheel tested to over 10.000 cuts.
• Guide rollers ensure a straight cut with no tracking.
• Large carrying handle for easy transport to the job site.
The heavy-duty O.D. Cleaning Brush cleans the outside
diameter of
The Inner Reamer removes turbulence-causing burrs
quickly and eortlessly
1
⁄2" or 2" (12 - 54mm) tubing quickly and easily
• Built-in
• Fitting brush kit includes six brushes, storage rack and collet.
Technical Specifications
• Motor: 230 V, 360 W, Induction Motor.
• Roller Speed: 450 RPM.
• Switch: Toggle On/O.
• Reamer: Single Flute Cone,
• Cutter Wheel: Model 2191 HD Wheel.
Standard Equipment
• One O.D. Cleaning Brush.
• One Core Reamer.
• One Fitting Brush Storage Kit.
1
⁄2" (12 mm) incremental scale for quick, easy measuring.
1
⁄2" (12 mm) to 2" (50 mm).
Catalog
No.
The optional fitting brush attachments can be used to
clean fittings fast
The optional Debur Disk is used to grind the O.D. edge to
help with tight fittings
Find Quality Products Online at: [email protected]
96362 122 Stainless Steel / Copper Tube Cutting Machine 50 22,68
Accessories
Catalog
No.
93717 –
93722 –
93727 – 1" Fitting Brush for 25 mm (3 Per Pack)
93732 – 1
93737 – 1
93742 – 2" Fitting Brush for 50 mm (3 Per Pack) 1
94682 – O.D. Cleaning Brush 1 0,44
46105 – O.D. Debur Disk 1
93747 – Quick-Change Collet 2
93712 – Fitting Brush Holder 6 2,63
93707 – Fitting Brush Storage Kit Includes Mountable Storage Rack,
33175 2191 Cutter Wheel for Copper
33551 122SS Cutter Wheel for Stainless Steel
34360 E-2192 Set of 10 pin screws
10343 – Wheel Pin for 33551 Cutter Wheel (2 per pack)
42360 1206 1206 Stand 31 14,06
94687 – 2" Reamer Cone Assembly
www.GlobalTestSupply.com
Model
No.
Model
No.
Description
Description
1
⁄2" Fitting Brush for 12 mm (3 Per Pack)
3
⁄4" Fitting Brush for 18 mm (3 Per Pack)
1
⁄4" Fitting Brush for 32 mm (3 Per Pack)
1
⁄2" Fitting Brush for 40 mm (3 Per Pack) 13⁄4 0,77
Quick-Change Collet, Spare Cutter Wheel, and Brushes (
1
1", 1
⁄4", 11⁄2", 2")
1
⁄2", 3⁄4",
Weight
lb. kg
Weight
lb. kg
1
⁄2 0,24
1
⁄2 0,26
3
⁄4 0,27
3
⁄4 0,29
3
⁄4 0,79
1
⁄4 0,57
1
⁄4 0,95
3 1,39
1
⁄4 0,01
1
⁄4 0,01
1
⁄4 0,01
1
⁄16 0,02
3.8
Page 9
Tubing Cutters
Tubing Cutter Selection
PIPE/TUBE CUTTING & PREPARATION
Cutter
Close Quarters Tubing Enclosed Feed Tubing Screw Feed Tubing Quick Acting Plastic / Multilayer Pipe
Page 3.10 Page 3.11 Page 3.11 Page 3.12 Page 3.14
Steel / Stainless ––
Copper
Plastic / PVC / Multilayer
Material / Diameter
Aluminum
3
3
3
3 3 3 3
(3 - 28 mm)
(3 - 60 mm)
(3 - 79 mm)
(6 - 170 mm)
–– ––
–– ––
3 3 3 3 3
3 3 3 3
–– ––
(3 - 63 mm)
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.9
Page 10
PIPE/TUBE CUTTING & PREPARATION
Midget Cutters for Close Quarters Tubing
• Specifically designed for use in restricted spaces on small diameter, hard and soft copper,
aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts.
• Strong, lightweight slide and wheel housing, large knurled feed screw knob gives easy control of
cutting pressure for clean cuts.
• Models 117 and 118 include a self-feeding cutter wheel that automatically cuts after tightening the
knob only once (AUTOFEED®).
• The Model 118 features a special knob for easier tightening of the feedscrew.
Model 101
• Model 101-ML is for multilayer tubing only.
NEW
AUTOFEED 2-in-1 Midget
Cutter
Catalog
40617 101 Midget Cutter* E-3469 6 - 28
32975 103 Midget Cutter E-3469 3 - 16
32985 104 Midget Cutter E-3469 5 - 24
97787 117 AUTOFEED Midget Cutter E-3469 5 - 24
32573 118 AUTOFEED 2-in-1 Midget Cutter
32933 118 Ratchet Handle only - for 118 and
21938 101-ML Midget Cutter for Multilayer
* Models 101 and 118 include spare cutter wheel in knob.
No.
Model
No.
Description
(incl. Ratchet Handle)*
101 Midget Cutters
tubing
Wheel
E-3469 6 - 28 1
E2155 6 - 28
Capacity Weight
Std.
– –
mm lb. kg
1
⁄2 0,23 6
1
⁄3 0,15 6
1
⁄3 0,15 6
1
⁄3 0,15 12
1
⁄16 0,48 1
5
⁄8 0,26 1
1
⁄3 0,15 6
Std.
Pack
For best cutting results, change the cutter’s wheel pin at least once for every two cutter wheel replacements.
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.10
Page 11
PIPE/TUBE CUTTING & PREPARATION
X-CEL® Means Speed
Many of our most popular tubing cutters now include several X-CEL features to make your job quicker and easier.
• X-CEL Knob – cut tubing more quickly and easily with our larger, more ergonomic designs.
• X-CEL Wheel Pin – change your cutter wheel quickly using our new ball detent design…no tool needed…no lost clips!
• Spare cutter wheels included for maximum uptime.
Enclosed Feed Tubing Cutters with New X-CEL Features
X-CEL Knob = quicker cut
Model 150L
X-CEL Pin = quicker wheel change
Grooved roller
Spare wheel included
in knob
Model 205
• Telescoping feed screw design keeps the cutter at the same length regardless of tubing diameter –
good for tight spaces.
• Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-toflare cuts, and a fold-away reamer.
• Now includes X-CEL Knob and X-CEL Pin for quicker cutting and wheel replacement.
• Made from high-strength zinc alloy.
• Spare cutter wheel included in the knob.
• Cuts hard / soft copper, aluminium, brass and multilayer tubes.
• Model 205 / 205S have quick acting mechanism for faster size adjustments.
Catalog
For Copper Tubing
For Steel Tubing
* Model 205 has an additional quick-acting mechanism
** Model 205S is suitable for stainless steel.
Model
No.
66737 150L Enclosed Feed Cutter E-3469 6 - 35 1 0,44 6
33055 205* Ratcheting Encl. Feed Cutter E3469 6 - 60 2 0,91 1
66742 150LS Above with Heavy Duty Wheel E4546 6 - 35 1
33070 205S** Above with Heavy Duty Wheel E-4546 6 - 60 2 0,91 1
No.
Description
Wheel
Capacity Weight
Std.
mm lb. kg
®
KNOB – For Quicker
Cutting
PIN – For Quicker
Wheel Change
SPARE WHEEL IN KNOB
1
⁄8 0,47 6
Std.
Pack
X-CEL Knob = quicker cut
Model 15
Fold-in reamer
No. 65S
Spare wheel included
in knob
Screw Feed Tubing Cutters with New X-CEL Features
• Clean, square cuts are easily made on copper, brass, aluminum and thin-wall steel.
• Now includes X-CEL Knob for quicker cutting.
• Models 10, 15 and 20 feature a convenient fold-away reamer.
• Models 65S and 35S are specially designed for stainless steel tubing. Includes 12x (65S) / 6x (35S)
individual bearings and a heavy duty cutter wheel to make stainless cutting easier.
• Models 65S features a quick-acting mechanism.
Catalog
Model
No.
32910 10 Screw Feed Cutter F-158 3 - 25
32915 10S Above w/H-D Wheel (for steel) E-1240 3 - 25
32920 15 Screw Feed Cutter F-158 5 - 28
32925 15S Above w/H-D Wheel (for steel) E-1240 5 - 28
32930 20 Screw Feed Cutter F-158 16 - 54 1
32935 20S Above w/H-D Wheel (for steel) E-1240 16 - 54 1
32940 30 Screw Feed Cutter E-2558 25 - 79 3
32950 30S Above w/H-D Wheel (for steel) E-2191 25 - 79 3
97212 15-SI Stainless Steel Cutter E-1525 5 - 28 1
29963 35S Stainless Steel Cutter E-635 6 - 35
31803 65S Stainless Steel Quick-Acting Tubing
No.
Cutter
Description
Capacity Weight
Std.
Wheel
E-635 6 - 65 1
mm lb. kg
7
⁄8 0,40 6
7
⁄8 0,40 6
1
⁄2 0,68 6
1
⁄2 0,68 6
3
⁄4 0,79 1
3
⁄4 0,79 1
1
⁄2 1,60 1
1
⁄2 1,60 1
1
⁄2 0,68 1
7
⁄8 0,40 1
1
⁄2 0,68 1
Std.
Pack
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.11
Page 12
PIPE/TUBE CUTTING & PREPARATION
Quick-Acting Tubing Cutters with New X-CEL Features
• Models 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces and
X-CEL Knob = quicker cut
Spare wheel
included in knob
thrust bearing slide assemblies for smooth operation.
• All Models now include an X-CEL Knob and X-CEL Pin for quicker cutting and wheel replacement.
• Available in models for plastic pipe or metallic tubing.
• Models 151 and 152 feature fold-away reamers.
• Model 151-ML is suitable for cutting multilayer tubing.
• Model 151 CSST is designed for cutting corrugated stainless steel tubing.
Model 151
X-CEL Pin = quicker
wheel change
Catalog
* Models for plastic tubing do not include spare cutting wheels
Model
No.
No.
31632 151 Quick-Acting Cutter E-3469 6 - 42 1
31637 151-P Above w/Wheel for Plastic E-2155 10 - 40 1
66747 151-ML Quick-Acting Tubing Cutter E-545 10 - 50 1 0,5 1
31642 152 Quick-Acting Cutter E-3469 6 - 66 2 0,92 1
31647 152-P Above w/Wheel for Plastic E-2155 10 - 63 2 0,92 1
36597 153 Quick-Acting Cutter E-3469 32 - 90 2 0,92 1
36592 153-P Above w/Wheel for Plastic* E-2155 25 - 75 2 0,92 1
31652 154 Quick-Acting Cutter E-2558 48 - 116 3
31657 154-P Above w/Wheel for Plastic* E-2156 50 - 110 3
59202 154-PE Above w/Wheel for PE pipe E2880 50 - 110 3
31662 156 Quick-Acting Cutter E-2558 100 - 170 5 2,23 1
31667 156-P Above w/Wheel for Plastic* E-2157 110 - 160 5 2,23 1
39957 156-PE Above w/Wheel for PE pipe E2880 110 - 160 5 2,23 1
32078 151
CSST
Description
Quick-Acting CSST Cutter E-4546 9.5 - 25.4 1 0,50 6
Std.
Wheel
Capacity Weight
mm lb. kg
1
⁄4 0,56 6
1
⁄4 0,56 6
7
⁄8 1,72 1
7
⁄8 1,72 1
7
⁄8 1,72 1
Std. Pack
RIDGID® Quick-Acting plastic cutter models are equipped to easily convert to cut
copper or other metallic tubing.
1. Remove spare copper cutting wheel from knob.
2. Reverse knob position so that the “Cu" notation is visible inside the knob.
3. Screw knob back on to handle.
4. Using the X-CEL Wheel Pin, you can quickly replace the existing plastic cutting wheel with the
copper cutting wheel. You’re now ready to cut copper, aluminum, and brass tubing.
5. When you wish to revert to plastic cutting, follow the same instructions but make sure to reposition
knob so that "PE" and "PVC" notations are visible inside knob.
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.12
Page 13
PIPE/TUBE CUTTING & PREPARATION
Tubing Cutter Replacement Wheels
Always use genuine RIDGID® Cutter Wheels. These wheels are precision-machined from high-grade steel and are engineered for long life and maximum
cutting accuracy.
Tubing Cutters
(Original Product)
LONG LIFE
CUTTER
WHEELS
Catalog
Model No.
No.
66772 E-545 6 6.5
33210 E-702 1 12.5
33165 E-1240 12 4.0
33200 E-1740 6 3.5
74720 E-2155 6 7.0
74730 E-2156 6 10.5
74735 E-2157 6 12.5
33175 E-2191 6 7.5
33170 E-2558 6 5.5
83235 E-2880 6 19.0
33205 E-2990 6 2.5
Cutter Wheels
33185 E-3469 12 3.5
34695 E-3495 6 7.0
33190 E-4546 6 4.0
33195 E-5272 6 7.0
33180 E-5299 6 10.5
33160 F-158 12 3.5
88260 E-10279 6 4.5
96397 E-1525 6 3.0
33551 122SS 1 7.5
29973 E-635 1 4.0
Denotes Cutter Wheels furnished with original product. Denotes alternate Cutter Wheel. * Blade Exposure = Wall Thickness in mm
•
Std.
Pack
32910
32920
Catalog No.
Model No.
Blade
Exp.*
97212
10
15
15-SI
• • •
•
29963
31803
32708
32930
32940
32945
32915/32925/32935
20
35S
65S
151 CSST
10S/15S/20S
30
30P
•
• •
• • • •
• •
• •
32955
40617-32573
32975-32985-97787
40
101/118
103/104/117
66737/33055
66742/33070
150L/205
150LS/205S
31632
151
31637
151-P
66747
151-ML
•
31642
152
31647
152-P
36597
153
36592
153-P
31652
31657
154
154-P
31662
156
• • •
• • • • • • •
•
31667
156-P
33055
59202/39957
96362/ 32950
205
122/30S
154-PE/156-PE
Application/
Material
Multilayer
Heavy Wall PVC, ABS
Steel – SS
Soft Flexible Pipe
PE, PB, PP, Std. &
Heavy Wall
PE, PB, PP, Std. &
Heavy Wall
PE, PB, PP, Std. &
Heavy Wall
Steel Tubing
•
Aluminum & Copper
PE, PB, PP, Std. &
•
Heavy Wall
Steel, Aluminum & Copper
Aluminum & Copper
Aluminum
Steel – SS
PVC, ABS, Std. Wall
PVC, ABS, Std. Wall
Aluminum & Copper
Thin-Wall PVC
Stainless Steel
Stainless Steel
Stainless Steel
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.13
Page 14
PIPE/TUBE CUTTING & PREPARATION
Plastic & Multilayer Pipe Cutters
Single Stroke Cutters
• For plastic (PVC, CPVC, PP, PEX, PE) and Multilayer tubing.
• Spring loaded handles for faster positioning. Single stroke, easy cut.
• PC-1250 features a reversible blade providing two times blade life. Is not suitable for cutting
multilayer tubing.
• PC-1375 ML: durable aluminium construction for heavy-duty use. Easy attachable ML-adapter for
improved multilayer cutting and instant re-rounding of tubing.
Model PC-1250
Model PC-1375 ML
Catalog
* 3-25 mm when used with ML-adapter
Model No. Description
No.
23488 PC-1250 Single Stroke Tubing Cutter 3 - 42
26803 PCB-1250 PC-1250 Replacement Blade –
23493 PC-1375 ML Single Stroke Tubing Cutter* 3 - 35*
25588 PCB-1375 PC-1375 Replacement Blade –
Capacity
(O.D.)
mm lb. kg
Weight
1
⁄2 0,22 6
1
⁄8 0,05 1
3
⁄4 0,34 6
1
⁄8 0,05 1
Std. Pack
When using the PC-1375 ML for cutting multilayer tubing it is recommended to use the included Multilayer adapter for an easier
cut and lesser deformation.
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.14
Page 15
Model RC-1625
PIPE/TUBE CUTTING & PREPARATION
Ratchet Cutters with Ergonomic Grips
• Ergonomic grips on bottom handle are spaced at
scale.
• X-CEL® quick-change blade.
• “Burr-less" cutting operation provides a square cut.
• Intended materials: Plastic (PVC, CPVC, PP, PEX, PE, Rubber hose) and Multilayer tubing.
• 1435N and 1442N not suitable for multilayer tubing.
1
⁄2" increments to act as a quick pipe measuring
Model 1442N
Model RC-2375
Catalog
No.
23498 RC-1625 Ratchet Action Plastic Pipe & Tubing Cutter 3 - 42 1
27858 RCB-1625 RC-1625 Replacement Blade –
30088 RC-2375 Ratchet Action Pipe & Tubing Cutter 12 - 63 1
30093 RCB-2375 RC-2375 Replacement Blade –
26821 1435N Ratchet Cutter 6 - 35 1
68616 1435N-B 1435N Replacement Blade –
10191 1442N Ratchet Cutter 3 - 42 1
42126 1442N-B 1442N Replacement Blade –
Model
No.
Description
Capacity
(O.D.)
mm lb. kg
Weight
3
⁄16 0,52 1
1
⁄8 0,03 1
7
⁄8 0,90 1
1
⁄4 0,10 1
1
⁄4 0,56 1
1
⁄12 0,04 1
5
⁄8 0,74 1
1
⁄8 0,06 1
Std. Pack
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.15
Page 16
PIPE/TUBE CUTTING & PREPARATION
P-TEC 3240
P-TEC 5000
NEW
Plastic Drain Pipe Cutter
The RIDGID® P-TEC Cutter is the first cutter of its kind that provides the hassle-free ability to execute
a clean, fast, and straight cut on thin-wall (< 2,5 mm) plastic tube. This versatile cutter can be used on
Polyethylene (PE), Polypropylene (PP), and Thin-Walled PVC tubes of two standard sizes: 32 and 40 mm
OD – both sizes with the same tool. Also available is the P-TEC 5000 for cutting 50 mm plastic drain
pipe. The P-TEC Cutter is another addition to the RIDGID Tubing tools family that brings tremendous
value to any trade in which PVC / PP / PE pipe is used and installed.
Unique Features and Benefits
• Clean, Automatic Deburring – The cut produced by this cutter results in only a fine strand of plastic,
as opposed to the fuzz created around the cut of a hacksaw. No need for a second tool to deburr,
this cutter automatically deburrs in parallel to cutting action.
• Automatic Beveling – Allows for immediate, easy joining to other sink drain pieces.
• Fast Cut – On average six rotations to complete one cut, four times faster than a hacksaw.
• Straight Cut – Easy-view windows ensure a straight cut on the marked pipe every time.
Clean – Automatic deburring and beveling.
Fast – Cuts in six rotations or less – four times faster than a hacksaw.
Straight – Easy viewing window ensures a cut on the mark.
Open Bore Design – P-TEC 5000 features an open bore design which:
• Reduces required hand force for cutting pipe.
• Fully eliminates sliding on the pipe.
• Makes it possible to cut double-flanged 50 mm plastic drain pipe.
Catalog
37463 P-TEC
40868 P-TEC
No.
Model
No.
3240
5000
Capacity
Description
Plastic Drain Pipe Cutter 32 & 40 0.44 0,2 1
Plastic Drain Pipe Cutter 50 0.44 0,2 1
(O.D.)
mm lb. kg
Weight
Std. Pack
CLEAN
FAST
STRAIGHT
Cut with a hacksaw (left)
versus the P-TEC 3240 (right).
Find Quality Products Online at: [email protected]
www.GlobalTestSupply.com
3.16
Page 17
Reamers, Deburring Tools
Plastic Construction Inner-Outer Reamer
• Handy for quick, clean and easy I.D. reaming and O.D. beveling of
• Plastic construction with long-wearing alloy steel blades.
• Gives fast, professional reaming on copper, aluminum, brass and other types of tubing.
PIPE/TUBE CUTTING & PREPARATION
1
⁄4" (6 mm) to 11⁄2" (40 mm) tube.
223S Inner-Outer Reamer
Catalog
34965 127 6 mm to 40 mm
No.
Model
No.
Capacity
Weight
lb. g
1
⁄4 113 1
Standard
Pack
Hardened Steel Construction Inner-Outer Reamer
• 46 cutting edges on interior cone allow for fast, clean, inner reaming and outer deburring/beveling
1
of
⁄2 (12 mm) to 2" (50 mm) copper and stainless steel tubing.
• Hardened steel construction.
Catalog
29983 223S 6 mm to 36 mm Copper and Stainless Steel Tubing
29993 227S 12 mm to 50 mm Copper and Stainless Steel Tubing 1
No.
Model
No.
Capacity
Weight
lb. g
3
⁄4 340 1
1
⁄4 560 1
Standard
Pack
Deburring Tools
• Deburring Tool for plastic pipe and tubing.
• Made of high-grade steel with specially-designed, long-lasting cutting edges.
• Slip-resistant vinyl hand grip.
• Ideal for removing outside ridges and inside burrs on plastic pipe and tubing.
Catalog
35155 72 Deburring Tool 12 - 40 6
64962 73 Deburring Tool 40 - 76 6
64967 74 Deburring Tool 100 6
No.
Model
No
Description
Plastic Pipe
Capacity
mm
Standard Pack
• Combines tube O.D. cleaning and fitting I.D. brush into one hand tool.
Inner-Outer Copper
Cleaning Brush
Find Quality Products Online at: [email protected]
• High carbon steel brushes quickly clean ½" (12 mm) to ¾" (19 mm) nominal tube and fittings in
preparation for soldering or brazing.
• Durable plastic construction designed for easy brush replacement.
Catalog No. Model No. Description
34142 4100 I-O Copper Cleaning Brush 3
34147 – Replacement Brush Set 1
Weight
oz. g
1
⁄4 90,7 1
1
⁄2 45,3 1
www.GlobalTestSupply.com
Standard
Pack
3.17
Loading...