350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part # 11280701
65-70 Impala HQ Series Rear Shock Kit
Components:
2 24179999 7” stroke HQ Series shock
2 90002024 1.7” eyelet – Adjustable
4 90001994 .625” bearing
8 90001995 Snap ring for bearing
2 90002010 Extended T-bar – Installed in shock body
4 90001980 Snap ring for T-bar
4 90002067 Aluminum bearing spacer - .625” I.D.
2 90001619 Round head cantilever pin
2 90000471 Aluminum spacer
Hardware:
4 99371004 3/8” x 1 ¼” USS bolt Shock to frame
8 99373003 3/8” SAE flat washer Shock to frame
4 99372002 3/8” USS Nylok nut Shock to frame
350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Installation Instructions
1. Fasten the upper shock T-bar to
the bottom of the frame using two
5/16” x 1” bolts, Nylok nuts and flat
washers.
2. Use the new cantilever pin
supplied to attach the bottom of the
shock to the axle.
1. Cantilever Pin
2. 5/8” SAE Washer
3. Aluminum Bearing Spacer
4. .625” Bearing
5. Aluminum Bearing Spacer
6. Factory axle bracket
7. ½” Lock Washer
8. ½” SAE Nut
Loading...