350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part # 11220702
64-72 GM “A” Body Master Series DA Rear Shock Kit
Components:
2 21259999 5” stroke Master Series double adjustable shock
2 90001684 4” tall Master Series eyelet
2 90001632 Bump stop
4 90001686 .625” bearing
4 90001900 Snap ring for bearing
2 90002010 Extended T-bar – Installed in shock body
4 90001980 Snap ring for T-bar
4 90002042 Aluminum bearing spacer - .625” I.D.
2 90001619 Round head cantilever pin
2 90000471 Aluminum spacer
Hardware:
2 99623001 5/8” SAE Gr. 8 flat washer Cantilever pin
4 99371004 3/8” x 1 ¼” USS bolt Shock to frame
8 99373003 3/8” SAE flat washer Shock to frame
4 99372002 3/8” USS Nylok nut Shock to frame
Installation Instructions
1. Attach the upper T-bar to the frame
in the oem location using the supplied
3/8” x 1 ¼” USS bolts, washers and
Nylok nuts.
2. The bottom of the shock attaches
with the new cantilever pin supplied.
See diagram below.
Note: The hole in the axle bracket may
need to be drilled out to 5/8”
1. Cantilever Pin
2. 5/8” SAE Washer
3. Aluminum Bearing Spacer
4. .625” Bearing
5. Aluminum Bearing Spacer
6. Factory axle bracket
7. ½” Lock Washer
8. ½” SAE Nut
Loading...