Ridetech 11160500 User Manual

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part #11160500
67-69 Camaro & 68-74 Nova Front CoolRide Kit
Components:
1 90000529 Driver side upper shock bracket
1 90000530 Passenger side upper shock bracket
2 20000011 Shock absorbers – Eye/Stud
2 20000011 Hardware kit
2 20000005 Hardware kit
Hardware:
8 99372002 3/8” USS Nylok nut Upper shock bracket to frame
16 99373003 3/8” SAE washer Upper shock bracket to frame
8 99371004 3/8” x 1 1/4" USS bolt Upper shock bracket to frame
350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Note: The upper shock bracket must be installed before installing the air spring.
1. Remove the bolt holding the brake line bracket to the frame.
2. Place the upper shock bracket against the frame behind the upper arm, it will index off of the factory brake line bracket hole. Use the factory bolt to hold the bracket in place. Proceed to drill the remaining holes while inserting a 3/8” x 1 ¼” bolt after drilling each hole.
3. Reattach the brake line to the new tab on the shock bracket.
4. Insert the cantilever pin through the lower shock eye, shock spacer and shock bracket and tighten with supplied hardware.
Insert the upper stud through the shock bracket using the supplied bushing, washers and nut.
2
Loading...