Ricoh GXe3300N, SubliJetR GXe3300N Installation Manual
Ricoh GXe3300N
ICC Prole
INSTALLATION GUIDE
MAC OS X
CAUTION
DO NOT INSTALL THE RICOH (OEM) INKS THAT WERE PROVIDED WITH THE PRINTER.
DO NOT POWER ON THE PRINTER BEFORE INSTALLING SAWGRASS SUBLIJET-R INK CARTRIDGES.
DURING DOWNTIME, IT IS HIGHLY RECOMMENDED TO LEAVE THE PRINTER POWERED ON TO
ALLOW THE RICOH AUTOMATIC MAINTENANCE UTILITIES TO KEEP THE PRINT HEAD NOZZLES
CLEAR.
Ricoh GXe3300N
ICC Prole — Installation Guide
Mac OS-X
Operating System
Before you begin, you will need to verify what version of Operating System you are using on your Mac. This is important
when deciding which drivers to download. You should only download those drivers, which are compatible with your version
of Operating System.
1.) To check the version of Operating System, rst click the apple icon in the top left corner of your
desktop. Then, scroll down and click About This Mac. The following screen containing the version
number should appear (see FIGURE 1). The below example is running Version 10.6.4. Please note
your version number and remember to only download those utilities which correspond with your
version of Mac OS.
1
2
FIGURE 1
3
PAGE 2 of 14 >>
Ricoh GXe3300N — Mac OS-X
SubliJet-R ICC Prole - Installation Guide (Continued; Page 3:14)
Ricoh (OEM) Printer Driver Installation
The following instructions will demonstrate how to install the Ricoh (OEM) printer driver on Mac OS X.
1.) Before installing the SubliJet-R ICC Prole, you will need to install the Ricoh (OEM) printer driver.
If the Ricoh (OEM) printer driver has already been installed on your machine, then please proceed
to the SubliJet-R GXe3300N ICC Prole Installation section. First, access the support section on the
Ricoh website by entering http://www.ricoh-support.com/enduser/downloads/ in the address eld of
your web browser. Select the appropriate printer model from the ‘Printers’ drop down menu and
click the ‘Go’ button (see Figure 1).
1
2
FIGURE 1
2.) Select ‘Download le from external website’ link from the ‘Drivers and Software’ section indicated
by the green arrow (see FIGURE 2).
FIGURE 2
PAGE 3 of 14 >>
Ricoh GXe3300N — Mac OS-X
SubliJet-R ICC Prole - Installation Guide (Continued; Page 4:14)
3.) Locate and click the link that corresponds with your Computers Operating System (see FIGURE 3).
FIGURE 3
4.) Finally, locate the RPCS Raster Driver for your Operating System and click the Download Icon (see
FIGURE 4). The Ricoh (OEM) printer driver should now begin downloading to your computer.
FIGURE 4
5.) Once the driver download has completed, click the download icon in the bottom right corner of
your desktop (see FIGURE 5 > 1). Next, double-click the z41034en.dmg le (see FIGURE 5 > 2).
The GelSprinter_GX_e3300N_xxx window should now appear (see FIGURE 6). Finally, double-click
the GelSprinter icon to begin the Ricoh (OEM) printer driver installation process (see
FIGURE 6 > 3).
3
2
1
FIGURE 5
FIGURE 6
PAGE 4 of 14 >>
Ricoh GXe3300N — Mac OS-X
SubliJet-R ICC Prole - Installation Guide (Continued; Page 5:14)
6.) Click Continue to allow the program to determine if the software can be installed (see FIGURE 7).
FIGURE 7
7.) In the Introduction window, click Continue (see FIGURE 8).
FIGURE 8
8.) In the License window, read the terms of the Software License Agreement and click Continue when
nished (see FIGURE 9).
FIGURE 9
PAGE 5 of 14 >>
Loading...