echnical Bulletin
T
PAGE: 1/3
Model:
Subject:
From:
Cattleya 2
Main ROM upgrade for Cattleya2
Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Other ( )
Part information
Electrical
Transmit/receive
Date:
26-Feb-01
Prepared by:
No.:
RB023001
H. Matsui
Action required
Service manual revision
Retrofit information
Symptom
Paper jams with the sorter stapler jogging function can occur under the following
conditions:
1. When ST33 (20 bin S/S) is used with Cattleya 2 (B023).
NOTE: If it is used for Cattleya 1(A257/A269), this will not occur.
2. When LT (11"X8 1/2") sideways is used when making 2 or more copies of an original.
Cause
The S/S main ROM software cannot compensate for the higher copy speed of Cattleya 2.
The timing of the jogger function and paper feeding does not match that of Cattleya 2.
Solution
When installing the ST33 on Cattleya 2, replace the S/S main ROM with ver "G" or newer.
The ROM version of the S/S main board can be viewed with copier SP7-801-005. The last
digit (for example G) indicates the ROM version. Version G can also be used for Cattleya1.
The part number of this new main ROM is A8315111.
echnical Bulletin
T
PAGE: 2/3
Model:
Program upgrade in mass production
The main ROM upgrade (ver G) has been applied from the first January 2001 production
run for each S/S. The cut-in serial numbers are as follows:
A831-17: H141130001 (see NOTE-1).
A831-26: 3T60110001 (see NOTE-2).
A831-55: L0551XXXXXX (see NOTE-3).
NOTE
1. "H14" is the prefix number. The 4th digit refers to the production year (1 = 2001). The
5th and 6th digits refer to the production month (13=January, 14=February, ........,
23=November, 24=December).
2. "3T6" is the prefix number. The 4th and 5th digits refer to the production month
(01=January, 02=February,........,11=November, 12=December). The 6th digit refers to the
production year (1 = 2001).
3. "L055" is the prefix number, The 5th digit refers to the production year (1 = 2001) and
the 6th and 7th digits refer to the production month (01=January,
02=February,........,11=November, 12=December). Because there are currently no A831-
55 models in production, there is no cut-in S/N at the moment. Please note that although
the Cattleya 2 has no Lanier model at present, there are cases in which A831-55 is used
with models other than Lanier.
Cattleya 2
Date:
26-Feb-01
No.:
RB023001
For the A831-17 model, machines with the following S/N have already been upgraded at
the factory:
H1402400031
H1402400050
H1402400054 to 57
H1402400059 to 63
H1402400068 to 69
H1402400076
H1402400090
H1402400117 to 154
<<Service parts>>
Service parts will be changed as follows:
S/S main board: A8315100 to A8315110 interchangeability: X/O
EPROM: A8315103 to A8135111 interchangeability: X/O
NOTE: The new main board and EPROM can also be used for the S/S which is installed
on the Cattleya 1.