Ricoh ST29 Technical Bulletin

 T

echnical

ulletin

B

PAGE: 1/1

Model:

Subject:
From:
Classification:

To enable the installation of the ST29 sorter stapler on the Penguin (Little: 50 cpm), the
following items have been changed from the June 1998 production runs.

Note: For the units manufactured in May 1998 and earlier, please add the film and install
the modified ROM.

1. With some types of recycled paper, jams may occur in the bin’s end fence. To prevent
this, film (A8342145) has been attached to the anti-static brush as shown.

2. When the duplex sorter enable by-pass mode is selected with SP mode, the jogger will
be moved even when feeding small size (A5, HLT, B6 Lengthwise) paper and the jogger
may crash into the bin. To prevent this, the software has been changed so that the
jogger will not be moved for small paper sizes. (ROM A6585103B → C)

Penguin

Installation of ST29 for the Penguin (Little: 50 cpm)

Technical Service Dept., GTS Division

Troubleshooting
Mechanical
Paper path
Other ( )

Part information
Electrical
Transmit/receive

Date:

30-Apr-99

Prepared by:

No.:

RA246006

F. Noguchi

Action required
Service manual revision
Retrofit information

Cut-in Serial Numbers
(from June ’98 production)

A658 -15:8A98060001~

-17:A7508060001~

-22:AL88060001~

-26:3N90680001~

Anti-staticBrush:A5552161

Parts Catalog Page 6

Film:A8342145

122±1 mm

0 – 1mm