T. Inoue, General Manager
1st Field Information Dept. QAC
Page 4
MODIFICATION BULLETIN NO. 2 PAGE 2 OF 2
JAPN PRODUCTION
ISSUED ON: January 31 ’97
MODEL NAME
Savin SR900120/60U.S.A.A608 - 15
Ricoh SR900
NRG SR900
Infotec SR900230/50EuropeA608 - 26
V/HzDESTINATION
120/60U.S.A., etc.
230/50Europe, etc.
120/60
230/50Europe, etc.
U.S.A. , Canada,
etc.
CODESERIAL NUMBER
A608 - 17
A608 - 22
Page 5
RICOHModification Bulletin
Model: F401 FinisherDate: 28-Feb-97 No: 0031/1
Modified Article: Parts CatalogPrepared by: H. K.
From: QAC 1st Field Information Dept.Checked by: T. Inoue
Reason for
Modification:
P/N Correction
Please correct the following part number in your parts catalog:
Incorrect
part
numbernumber
A612 4140A612 6179Lower Front Cover512
Parts catalog correction
To facilitate assembly
Part Standardization
Correct
part
DescriptionPageIndex Note
Vendor change
To improve reliability
Other
To meet standards
( )
Page 6
RICOHModification BulletinPAGE: 1/1
Model: Finisher for F401/411/421Date: 15-Jun-97
No: 4
Modified Article: Stapler Guide RailPrepared by: M.Kitajima
From: QAC 1st Field Information Dept.
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
To meet standards
( )
Old partNew partDescriptionQtyIntPageIndex Note
numbernumber
A3003732A6974186Stapler Guide Rail1-1O/O1333
To standardize with other models, the above mentioned part has been changed.
JAPAN PRODUCTION
MODEL
NAME
Savin SR900120/60U.S.A.A608 - 15
Ricoh SR900120/60U.S.A. etc.A608 - 17
NRG SR900120/60U.S.A. ,
V/ HzDESTINATIONCODESERIAL NUMBER
230/50Europe etc.
A608 - 22
Canada etc.
230/50Europe etc.
Infotec SR900230/50EuropeA608 - 26
Page 7
RICOHModification
Bulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
To improve paper alignment in staple mode, the shapes of the front and rear jogger fences
have been changed.
Finisher for F401/411/421/C-bird
Front/Rear Jogger Fence
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization