Ricoh sr810 Modification Bulletin
odification Bulletin
M
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Bellini Finisher
Timing Pulley - 28Z
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
B3022318 B3022304 Timing Pulley – 28Z 1 X/O 33 18
New part
number
Description Q’ty Int Page Index Note
Date:
31-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MB302001
H.K.
To meet standards
( )
To ensure proper rotation of the shift tray sponge roller timing belt, one flange has been
attached to either side of the pulley. Previously, there was only one flange.
Attached flange
Previous flange
Timing Pulley
RCL (Japan) Production
MODEL NAME V/Hz DESTINATION CODE SERIAL NO.
Lanier SR810 220,230,
240/50,60
Savin
Gestetner SR810
Ricoh
Infotec SR810 220,230
220,230,
240/50,60
240/50,60
USA, Canada,
Europe
USA, Canada.
South America
Europe, etc
Europe, etc. B302-26 4B21290001
B302-14 L0679120001
B302-17 H3891200001
!"#$% M
odification Bulletin
PAGE: 1/2
Model:
Bellini Finisher
Modified Article:
From:
Technical Service Dept., GTS Division
Reason for
Modification:
Guide Mylar
Parts catalog correction
To facilitate assembly
Part standardization
Date:
06-Jun-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MB302002
H.K.
To meet standards
( )
Please add the following part to your parts catalogue.
Old part
number
New part
Description Q’ty Int Page Index Note
number
B3024776 Guide Mylar – 17x60 2 11 *23
*: New Index
Please add the two guide mylars to the illustration on page 10 in your parts catalogue.
14 Paper Feed Guide
B3024711
L: 0 ~ 1 mm, H: 2 ~ 3 mm
23: Guide Mylar
•••
•
•
•
•
23: Guide Mylar
!"#$% M
odification Bulletin
PAGE: 2/2
Model:
Bellini Finisher
Date:
06-Jun-00
RCL (Japan) Production
MODEL NAME V/Hz DESTINATION CODE SERIAL NO.
Lanier SR810 220,230,
240/50,60
Savin
Gestetner SR810
Ricoh
Infotec SR810 220,230
220,230,
240/50,60
240/50,60
USA, Canada,
Europe
USA, Canada.
South America
Europe, etc
Europe, etc. B302-26
B302-14
B302-17
No.:
MB302002
!"#$% M
odification Bulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini Finisher
Positioning Fences
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
B3024511 B3024518 Front Positioning Fence 1 X/X 13 4 1
B3024521 B3024528 Middle Positioning Fence 1 X/X 13 5 1
B3024531 B3024537 Rear Positioning Fence 1 X/X 13 8 1
B3024771 B3024773 Paper Exit Pawl 1 X/X 13 18 2
B3022333 B3022338 Lower Exit Guide 1 X/X 33 22 2
New part
number
Description Q’ty Int Page Index Note
Date:
06-Jul-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MB302003
H.K.
To meet standards
( )
To improve stacking in the jogger unit, the production machines have been modified as
follows:
1. The widths of the positioning fences (Front, Middle, and Rear) have been modified as
follows:
Note 1: When replacing either of the old fences in the field, install all three new parts as a
set.
Old Fences New Fences
28.6
17.5
28.6
19.5
(17.5)
Loading...