Page 1
MODIFICATION BULLETIN NO. 1 PAGE 1 OF 2
ISSUED ON: July 15, ’96
Model AD3 Finisher Volt/Hz
Modified Article Parts Catalog
Reason for
Parts Catalog Correction
Modification
Please correct your parts catalog as follows.
Incorrect P/N Correct P/N Description
Index No. Page
A379 4711 A608 4711 Decal Misfed Removal 20 7
Modification
Parts Catalog
Date of
Serial Number
For
S. Fujii, General Manager
2nd Field Information Dept. QAC
Page 2
MODIFICATION BULLETIN NO. 1 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: July 15, ’96
MODEL NAME CODE SERIAL NUMBER
RICOH SR700 120/60
RICOH SR700
Nashuatec SR700 120/60
Rex Rotary SR700
Savin SR700 120/60 USA A612-15 1st Production
V/Hz DESTINATION
USA, CANADA, S. AMERICA
EUROPE, ASIA
220, 230,
240/50, 60
220,230,
240/50, 60
USA, CANADA, S. AMERICA
EUROPE, ASIA
USA, CANADA, S. AMERICA
EUROPE, ASIA
EUROPE, ASIA A612-22
A612-17 1st Production
A612-22
A612-22 1st Production
1st Production
1st Production
Page 3
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 1
ISSUED ON: November 30, ’96
Model Finisher for AD3 Volt/Hz
Modified Article No serial number cut-in information
Reason for
Parts catalog correction
Modification
Date of
Modification
The following should be corrected. Please correct your part catalog.
Old Part Number New Part Number Description Q’ty Index No. Page
A6392322 Entrance Guide 1 19 7
A6122329
Guide Mylar
1 19 7
Serial Number
for
S. Fujii, General Manager
2nd.Field Information Dept. QAC
Page 4
RICOH Modification Bulletin PAGE: 1/1
Model: Finisher for AD3 Date: 30-Apr-97
No: 3
Modified Article: Lower Cover Prepared by: E.Fukuyama
From: QAC 2nd Field Information Dept. Checked by: S. Fujii
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
To meet standards
( )
The following should be corrected. Please correct your part catalog.
Old part New part Description Qty Index Page
number number
A6122412 Entrance Guide Plate 1 24 7
A6124140 Lower Cover 1 12 7
A6126179 Lower Front Cover 1 12 7
M.Iwasa, Manager
2nd .Field Information Dept. QAC
Page 5
RICOH Modification Bulletin PAGE: 1/1
Model: AD3 Date: 15-May-97
Modified Article: Position Roller Shaft Prepared by: E.Fukuyama
From: QAC 2nd Field Information Dept.
Reason for
Modification:
Please correct your parts catalog.
Old part New part Description Qty Int Page Index Note
number number
A3003856 A6122815 Positioning Roller Shaft 1 17 2
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
No: 15
To meet standards
( )
Page 6
RICOH Modification Bulletin PAGE: 1/1
Model: Finisher for AD3 Date: 15-June-97
Modified Article: Grounding Plate - Copier Prepared by: E. Fukuyama
From: QAC 2nd Field Information Dept.
Reason for
Modification:
The part number has been changed for part standardization.
Old part New part Description Qty Int Page Index Note
number number
A6125951 A6665455 Grounding Plate- Copier 1 O/O 7 21
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
No: 4
To meet standards
( )
Page 7
RICOH Modification Bulletin PAGE: 1/2
Model: Finisher for AD3 Date: 15-Jun-97
No: 5
Modified Article: Positioning Fence Mylar Prepared by: E. Fukuyama
From: QAC 2nd Field Information Dept.
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
To meet standards
( )
To improve paper stacking reliability, the shape of the mylar on the Positioning Fence has
been changed.
Old part New part Description Qty Int Page Index Note
number Number
A3794259 A6124258 Positioning Fence Mylar : Rear 1 X/O 13 6
A3794259 A6124259 Positioning Fence Mylar : Front 1 X/O 13 40
A3794259
A6124258
Page 8
RICOH Modification Bulletin PAGE: 2/2
Model: Finisher for AD3 Date: 15-Jun-97
No: 5
MODEL NAME V/ Hz DESTINATION CODE SERIAL NUMBER
RICOH SR700 120/ 60 USA, CANADA, S.
AMERICA EUROPE,
ASIA
Gestetner
SR700
Nashuatec
SR700
Rex Rotary
SR700
Savin SR700 120/ 60 USA A612- 15 3A86070001
240/ 50,
60 220,
230,
120/ 60 EUROPE, ASIA USA,
240/ 50,
60
220,230,
USA, CANADA, S.
AMERICA EUROPE,
ASIA
CANADA, S. AMERICA
EUROPE, ASIA A612- 22 9336070001
A612- 17 A3926070001
A612- 22 9336070001
A612- 22 9336070001
Page 9
RICOH Modification Bulletin PAGE: 1/1
Model: Finisher for the AD3 Date: 31-July-97
Modified Article: Position Roller Shaft Prepared by: E. Fukuyama
From: QAC 2nd Field Information Dept.
Reason for
Modification:
Old part New part Description Qty Int Page Index Note
number Number
A3003854 A6122815 Position Roller Shaft 1 17 2 1
This information was issued previously in MB #15 for the AD3.
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
No: 6
To meet standards
( )
However, this parts catalog correction is for the AD3 finisher.
Therefore, please disregard MB #15 for the AD3.
Page 10
M
Model:
Finisher for the AD3
odification
ulletin
B
Date:
15-Sep-97
No:
PAGE: 1/1
7
Modified Article: P
From:
Reason for
Modification:
The following should be corrected. Please correct your parts catalog.
QAC 2nd Field Information Dept.
Old part New part Description Qty Int PageIndexNote
number Number
AW020006 AW020075 Photointerruptor 2 15 34
AW020012 AW020049 Photointerruptor 2 13 17
hotointerrupter
Parts catalog correct ion
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
S.Tomoe
( )
Page 11
M
Model:
Finisher for the AD3
odification
B
Date:
ulletin
30-Sep-97
No:
PAGE: 1/2
8
Modified Article:
From:
Reason for
Modification:
We would like to inform you of the modification in shape of the Entrance Guide that is
packed with the Finisher.
Reason for Modification
When the Entrance Guide is installed in the Main Frame, it came in contact with the heads
of some screws in the Main Frame, causing installation problems.
Details of the Modification
Two parts of the Entrance Guide have been cut away to prevent this part from coming in
contact with screws in the Main Frame during installation.
QAC 2nd Field Information Dept.
Entrance Guide
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
E.Fukuyama
( )
Old Entrance Guide
New Entrance Guide
Note: This modification was implemented in the June~September 97 production run units.
The Entrance Guide was modified again from the September 97 production run.
Old part New part Description Qty Int Page Index Note
number Number
A6122329 A6122331 Entrance Guide 1 O/O 7 19
Page 12
M
Model:
MODEL NAME DESTINATION CODE SERIAL NUMBER
SR700
Savin
SR700 EUR, ASIA,
SR700
Gestetner
SR700
Infotec
Finisher for the AD3
USA A612- 15 3A87050001
USA, CANADA,
S. AMERICA
EUR, ASIA,
USA, CANADA,
S. AMERICA
EUROPE A612- 26 3J00570001
odification
JAPAN PRODUCTION
A612- 17 A3927050001
A612- 22 9337050001
B
Date:
ulletin
30-Sep-97
No:
PAGE: 2/2
8
Page 13
M
odification
MB Correction
Reissue date:
The items in bold italic have been corrected.
Model:
31-Oct-97
Finisher for the AD3
B
Date:
ulletin
30-Sep-97
No:
PAGE: 1/2
9
Modified Article:
From:
Reason for
Modification:
We would like to inform you of the modification to the shape of the Entrance Guide packed with the
Finisher.
Reason for Modification
The Entrance Guide bends easily, so it is difficult to install on the Main Frame.
Details of the Modification
To increase the strength of the Entrance Guide (mylar), the edges have been folded.
QAC Field Information Dept.
Entrance Guide
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
E.Fukuyama
( )
237
Old Part New Part Description Qty Int Page Index Note
Number Number
A6122331
Old Entrance Guide
Folded Section
p
5mm
New Entrance Guide
A6122333 Entrance Guide 1 X/O 7 19
Page 14
M
Model:
MODEL NAME DESTINATION CODE SERIAL NUMBER
SR700
Savin
SR700 EUR ASIA,
SR700
Gestetner
SR700
Infotec
Finisher for the AD3
USA A612- 15 3A87090001
USA, CANADA,
S. AMERICA
EUR ASIA,
USA, CANADA,
S. AMERICA
EUROPE A612- 26 3J010070001
odification
JAPAN PRODUCTION
A612- 17 A3927090655
A612- 22 9337090001
B
Date:
ulletin
30-Sep-97
No:
PAGE: 2/2
9
Page 15
M
Model:
Finisher for AD3
odification
B
Date:
ulletin
31-Oct-97
No:
PAGE: 1/1
10
Modified Article:
From:
Reason for
Modification:
To standardize with other models, the above mentioned part has been changed.
MODEL NAME V/ Hz DESTINATION CODE SERIAL NUMBER
RICOH Aficio 400 120/ 60 USA, CANADA,
RICOH Aficio 400 240/ 50, 60
Gestetner 2640E 120/ 60 USA, CANADA,
Gestetner 2640E 240/ 50, 60
Nashuatec D3640 120/ 60 USA, CANADA,
Nashuatec D3640 240/ 50, 60
Rex Rotary 8240E 120/ 60 EUROPE A133- 10
Infotec 5401 240/ 50, 60
Savin 9940DP 120 / 60 USA A133- 15
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number Number
A3003732 A6974186 Stapler Guide Rail 1 O/O 15 33
Stapler Guide Rail
Parts catalog correction
To facilitate assembly
Part standardization
220, 230,
220,230,
220,230,
220,230,
Vendor change
To improve reliability
Other
S. AMERICA
EUROPE, ASIA A133- 27
S. AMERICA
EUROPE, ASIA A133- 22
S. AMERICA
EUROPE, ASIA A133- 22
EUROPE A133- 26
Prepared by:
JAPAN PRODUCTION
A133- 17
A133- 10
A133- 10
E.Fukuyama
To meet standards
( )
Page 16
M
Model:
Finisher for AD3
odification
B
Date:
ulletin
15-Jan-98
No:
PAGE: 1/1
11
Modified Article:
From:
Reason for
Modification:
Please correct your parts catalog.
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number number
AX050055 DC Motor - DC 9W 1 25 10
DC Motor
Parts catalog correction
To facilitate assembly
Part Standardization
AX050074 DC Motor - DC 9.9W 1
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
S. Tomoe
( )
Page 17
M
odification
MB Correction
Reissue date:
The MB number has been corrected.
Model:
Finisher for AD3
30-Apr-98
B
Date:
ulletin
31-Mar-98
No:
PAGE: 1/1
12
Modified Article:
From:
Reason for
Modification:
The following should be corrected. Please correct your parts catalog.
QAC Field Information Dept.
Old part New part Description Qty Int Page Index Note
number number
59202144 Spring - Lock 1
Spring - Lock
Parts catalog correction
To facilitate assembly
Part standardization
AA063529 Pressure Spring – 14.5mm 1
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
S.Tomoe
( )
9 & 11 10 & 5
Loading...