Ricoh SR700 Modification Bulletin SR710
M
Model:
Finisher for the AD50
odification
B
Date:
ulletin
15-Sep-97
No:
PAGE: 1/2
1
Modified Article:
From:
QAC 1st Field Information Dept.
Reason for
Modification:
New Product Information
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
S.Tomoe
( )
The new finisher, SR710, is one of the options for the AD50 (A217) and will be launched
from this November (refer to RTB # 1 for more details). This MB contains parts information
for the new SR710. Please add these to your SR700 (A612) the Parts Catalog.
1. The following parts are not used for the SR710, but they are still used for the SR700.
Old part New part Description Qty Int Page Index Note
number number
A6665455 Grounding Plate (SR700)
A6125955 Grounding Plate - Bank (SR700)
1 → 0
1 → 0
721
722
2. The following parts will be changed.
Old part New part Description Qty Int Page Index Note
number number
A6125120 Main Control Board (SR710) 1 25 2
A5662101 Stepping Motor - DC 6.3W
A6122101 Stepping Motor - DC 6.3W
(SR710)
A6125661 IC - AM27C256-15DC (SR710) 1 25 3
2 → 1
0 → 1
25 22 1
25 31 1
NOTE: Refer to the attached illustration.
The following table shows the differences between the SR700 and the SR710.
SR700 SR710 Description Qty Page Index
A6665455
A6125955
A6125110 A6125120 Main Control Board 1 25 2
A5662101 Stepping Motor - DC 6.3W 1 25 22
A6125651 A6125661 IC - AM27C256-15DC 1 25 3
---
---
A6122102 1 25 31
Grounding Plate (SR700)
Grounding Plate - Bank (SR700)
1
1
721
722
M
)
)
Model:
Finisher for the AD50
odification
22 (SR700
31 (SR710
B
Date:
ulletin
15-Sep-97
No:
PAGE: 2/2
1
Loading...