
MODIFICATION BULLETIN NO. 1 PAGE 1 OF 1
T. Inoue, General Manager
1st Field Information Dept . QAC
ISSUED ON: May 31, ’96
Model Sorter Adapter Type J Volt/Hz
Modified Article Parts Catalog No serial number for this model.
Reason for
Parts CatalogCorrection
Modification
Date of
Modification
Serial Number
Please correct your parts catalog as follows.
Incorrect P/N Correct P/N Description Q’ty Used
03410300B 03140300 Philips Pan Head Screw - M4 x 30
2 → 2
Inter-
change-
ability
O/O 101 3
Parts Catalog
Index No. Page

MODIFICATION BULLETIN NO. 2 PAGE 1 OF 1
ISSUED ON: September 15, ’96
Model Sorter Adapter Type J Volt/Hz
Modified Article Air Outlet Plate No serial number cut-in information
Reason for
To improve the air flow
Modification
Date of
Modification
Serial Number
The charge inlet fan may draw in air blown out from the fusing unit which may result in abnormal cop y quality.
To prevent this problem, the air outlet plate has been modified. The number of Philips pan head scr ews
has been reduced from 9 to 8 since new plate uses a screw from the sorter.
Old P/N New P/N Description Q’ty Used
A527 1042 A527 1045 Air Outlet Plate
0314 0060B Philips Pan Head Screw M4 x 6
1 → 1
n → n-1
Inter-
change-
ability
X/O 3 3
Parts Catalog
Index No. Page
103 3
New Air Output Plate
T. Inoue, General Manager
1st Field Information Dept. QAC

M
odification
B
ulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
To prevent noise from the vibration of the fan motor bracket, a foam cushion (Description:
Shield Guide Plate) has been added.
DFC-Alpha Sorter Adapter Type J
Fan Motor Bracket
GTS and S Field Information Dept.
Parts catalog correction
To facilitate assembly
Part standardization
Old part New part Description Qty Int Page Index Destination
number number
A5271041 A5271047 Fan Motor Bracket 1-1 x/o 3 2
AA151144 Shield Guide Plate 0-1 3 7
Date:
Vendor change
To improve reliability
Other
15-Oct-98
Prepared by:
No.:
3
N. Kaiya
To meet standards
( )