M
Model:
LCT for AD1-E
odification
ulletin
B
Date:
15-Feb-98
No:
PAGE: 1/1
1
Modified Article:
From:
Reason for
Modification:
A.To reduce paper jams caused by dust between the timing pulley and the drive shaft :
1. AA140627(1) • AA140693(1) Drive Shaft – Feed Roller P 7-24
2. H5194713(1) • A6672615(1) Timing Pulley Collar – 6x8 X/O P 7-27
3. H5194714(1) • A6672616(1) Timing Pulley – 22Z P 7-25
QAC Field Information Dept.
Timing Pulley
Parts catalog correct ion
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Pulley
(A6672616)
Prepared by:
To meet standards
A taper is added to
the collar.
K. Ugaeri
( )
Collar
(A6672615)
Drive Shaft
(AA140693)
The collar has been made so that a
portion of it is inserted into the pulley.
B.To reduce the noise from the relay roller :
1. AF020385(1) → AF02045 2(1) → Relay Roller P11-16
2. A6672516(1) Fly Wheel (New) X/O
3. 03140060W(2) Philips Pan Head Screw-M4x6 (New)
Refer to AD1 RTB no.48 for details.
5.LCT UNIT 5 (A667)
M
odification
MB Correction
Reissue date:
The illustration has changed as shown below.
Model:
LCT for AD1-E
15-Jun-98
B
Date:
ulletin
15-Feb-98
No:
PAGE: 1/2
1A
Modified Article:
From:
Reason for
Modification:
A. To reduce paper jams caused by dust between the timing pulley and drive shaft :
1. AA140627(1) • AA140693(1) Drive Shaft – Feed Roller P 7-24
2. H5194713(1) • A6672615(1) Timing Pulley Collar – 6x8 X/O P 7-27
3. H5194714(1) • A6672616(1) Timing Pulley – 22Z P 7-25
QAC Field Information Dept.
Timing Pulley
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Pulley
(A6672616)
Prepared by:
A taper is added to the
collar.
K.Ugaeri
To meet standards
( )
Collar
(A6672615)
Drive Shaft
(AA140693)
The collar has been made had so that a
portion of it is inserted into the pulley.
B. To reduce the noise from the relay roller :
1. AF020385(1) → AF02045 2(1) → Relay Roller P11-16
2. A6672516(1) Fly Wheel (New) X/O
3. 03140060W(2) Philips Pan Head Screw-M4x6(New)