Ricoh rsc2fax Technical Bulletin

echnical Bulletin
T
PAGE: 1/1
Model:
Subject:
From:
Russian-C2
The fax function does not work
Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Other ( )
Part information
Electrical
Transmit/receive
Date:
Prepared by:
No.:
RB022001
S. Tomoe
Action required
Service manual revision
Retrofit information
The fax option type 1027 does not function if it is the only option installed on the mainframes listed below (Aug/Sept ‘01). It will function normally on these machines when either the 32MB or 64MB copier memory option is installed.
When only this fax option is installed on the machines listed below, please perform either of the following:
1 Update the GW controller firmware to ver.4.15 or later, or:
2 Install the 32MB or 64MB copier memory option.
Version 4.15 has been applied from Oct ’01 production.
Machines for above action (only in cases where needed):
The following are from September ’01 production, except for the one group labeled from August production.
B022-17: J0110900001 - J0110902945 B022-22: J0110903071 - J0110903880 B022-24: L1161090001 - L1161090357 B022-26: 4M10910001 - 4M10910250 B022-27: J0110800001 - J0110801050 (August ’01 production)
J0110903881 - J0110904727 B027-17: J0210900001 - J0210901700 B027-22: J0210901701 - J0210901980 B027-24: L1171090001 - L1171090380 B027-26: 4M20910001 - 4M20910300 B027-27: J0210901981 - J0210903332
echnical Bulletin
T
PAGE: 1/4
Model:
Subject:
From:
Russian-C2
Major differences between Russian-C1 and Russian-C2
Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Other ( )
Part information
Electrical
Transmit/receive
Date:
Prepared by:
Action required
Service manual revision
Retrofit information
No.:
RB022002
S. Tomoe
This RTB outlines the major differences between the Russian-C1 and Russian-C2.
Overview:
The R-C2 is intended as the successor model to the R-C1. The mechanical components and design of these two models are nearly identical. In addition, the electrical system of the R-C2 employs GW architecture.
Machine Configuration:
13
1
2
3
12
4
5
6
11
10
7
8
9
Version Item Machine Code No. Comments
Copier
Copier(R-C2a) B022 1 Copier(R-C2b) B027 1 ARDF B386 3 New option Platen Cover B406 2 Common with Kir-C Paper Tray Unit-2 tray B390 9 LCT B391 8 1-bin Tray B413 4 Color change Shift Tray B459 13 Color change Duplex Unit B414 6 By-pass Tray B415 7 Color change Interchange Unit B416 5 Color change Bridge Unit B417 12 1000-sheet finisher B408 11 New option
*See Note 2 *See Note 2
*See Note 2
*See Note 2
echnical Bulletin
T
PAGE: 2/4
Model:
Version Item Machine Code No. Comments
Fax
Printer/ Scanner
Russian-C2
500-sheet finisher B442 10 Common with R-P2, Color
Key Counter Bracket B452 Color change Fax Unit B418 JBIG A892 Common with Stinger-C G3 interface unit B448 G4 kit B449 Hand set B433 Color change Printer unit B461 Printer & Scanner unit B453 HDD B420 PS3 B462 User Account Enhance B443 Common with A-C2 NIB G335 IEEE 1394 G590 Common with A-C2 Memory – 32MB G578 Common with A-C2 Memory – 64MB G579 Common with A-C2
Date:
change
No.:
RB022002
Note:
1) The R-C2 has a new exterior color (same as A-C2).
2) The Drive Motor and Control Board for these peripherals have been changed so that the
peripherals can be installed on the high cpm machine (R-C2c).
Loading...
+ 7 hidden pages