Ricoh Ri 3000, Ri 6000 User Manual

RICOH Ri 3000 Ri 6000 USER MANUAL

For safe and correct use, be sure to read the Safety Information in Safety Information and Quick Installation Guide before using the machine.

Version 1.0

RICOH Ri 3000 & RICOH Ri 6000 Direct to Garment Printer

User Manual

Table of Contents

How to Read Manuals .................................................................................................................................... 7

Safety Symbols for This Machine ......................................................................................................... 8

Safety Information for This Machine ................................................................................................... 9

Safety during Operation .................................................................................................................................. 9

Safety Precautions to Be Followed .................................................................................................... 10

Environments where the machine can be used ........................................................................................... 10

Handling power cords and power plugs ....................................................................................................... 10

Power source ................................................................................................................................................ 11

Handling the main machine .......................................................................................................................... 12

Handling the machine's interior.................................................................................................................... 13

Handling the machine's supplies .................................................................................................................. 14

Adjustment ................................................................................................................................................... 15

Removing the Fabric ..................................................................................................................................... 15

Maintenance (Cleaning the Units and Disposing of Waste Ink) ................................................................... 15

Safety Labels of This Machine............................................................................................................ 16

Front .............................................................................................................................................................. 16

Back ............................................................................................................................................................... 16

Machine’s Interior ......................................................................................................................................... 17

Symbols for Power Switch ................................................................................................................. 20

Symbols for power switch that are used for this machine are as follows: ................................................... 20

User Notes ........................................................................................................................................ 21

Laws and Regulations ........................................................................................................................ 22

Legal Prohibition ........................................................................................................................................... 22

Chapter 1: Product Information ............................................................................................... 24

1: Printer Specifications ................................................................................................................................ 24

2: Operation Environment Requirements ..................................................................................................... 28

3: System Requirements ............................................................................................................................... 29

4: Computer Interface Requirements ........................................................................................................... 29

5: Consumables ............................................................................................................................................. 29

6: Customer Training Checklist ..................................................................................................................... 30

Chapter 2: Startup of a New Printer ........................................................................................ 31

1: Unpacking the Printer ............................................................................................................................... 31

2: What’s in the Box ...................................................................................................................................... 32

3: What Else is Needed .................................................................................................................................. 33

4: Setting up the Printer ................................................................................................................................ 33

5: Before Filling the Printer with Ink ............................................................................................................. 37

6: Filling the Printer with Ink ......................................................................................................................... 37

7: Performing a Nozzle Check ........................................................................................................................ 41

8: Printer Software Program Requirements ................................................................................................. 43

9: Adding a new printer to AnaRIP ................................................................................................................ 44

10: Choosing Ink Sets .................................................................................................................................... 44

Chapter 3: Printer Controls ..................................................................................................... 46

1: Power Switches ......................................................................................................................................... 46

2: Control Panel............................................................................................................................................. 46

3: Buttons ...................................................................................................................................................... 48

Chapter 4: Printer Operation .................................................................................................. 49

1: First Time Start up Sequence .................................................................................................................... 49

2: Power up Sequence .................................................................................................................................. 49

3: Power down Sequence ............................................................................................................................. 49

4: Moving Print Table .................................................................................................................................... 50

5: Adjustment of Print Table ......................................................................................................................... 50

6: Safety Warnings ........................................................................................................................................ 52

Chapter 5: Printer Settings ....................................................................................................... 59

1: Select Printer settings................................................................................................................................ 59

2: Language ................................................................................................................................................... 59

3: Pre-Print Checks ........................................................................................................................................ 60

4: Wipe After Number of Prints .................................................................................................................... 61

5: Cap Head Delay ......................................................................................................................................... 62

8: Network Connection ................................................................................................................................. 66

9: Printer Number ......................................................................................................................................... 68

10: Set Time Zone ......................................................................................................................................... 69

11: Print Counters ......................................................................................................................................... 69

Chapter 6: Light Garment Printing Process ............................................................................... 71

1: AnaRIP Raster Image Processor ................................................................................................................ 71

2: Printer Performance ................................................................................................................................. 71

3: Using the RICOH Ri 3000 and RICOH Ri 6000 AnaRIP Program for Printing Light Garments.................... 71

4: AnaRIP Advanced features ........................................................................................................................ 83

5: Loading Garments on the Print Table ....................................................................................................... 87

6: Removing Garments from the Print Table ................................................................................................ 88

7: Set the Image with Heat ........................................................................................................................... 88

Chapter 7: Printing on Dark Garments ...................................................................................... 90

1: Basic Dark Garment Printing Process ........................................................................................................ 90

2: Maintenance of White Ink ........................................................................................................................ 91

3: Scheduled Maintenance ........................................................................................................................... 92

4: Pre-treatment of Dark Colored Garments ................................................................................................ 92

5: Dark Garment Ri 3000 or Ri 6000 AnaRIP Settings ................................................................................... 94

6: Set the Image with Heat Treatment ....................................................................................................... 105

7: Dark Garment Washing ........................................................................................................................... 106

Chapter 8: Hot Folders ........................................................................................................... 107

1: Creating a template ................................................................................................................................ 107

2: Establish Hot Folder Location ................................................................................................................. 108

3: Define Holder Folder Settings ................................................................................................................. 108

Chapter 9: Maintenance and Transportation .......................................................................... 113

1: Technical Notes on White Ink Maintenance ........................................................................................... 114

2: Maintenance Schedule ........................................................................................................................... 115

3: Required Maintenance ........................................................................................................................... 116

4: Ink Levels and Cart Replacement ............................................................................................................ 124

5: Switching from Ink to Cleaning Solution Using the Startup Fill Function ............................................... 128

6: Waste Ink Tank and Drip Absorbers........................................................................................................ 129

7: Changing Fan Filters ................................................................................................................................ 134

8: Cleaning the Printer ................................................................................................................................ 134

9: Transporting the Printer ......................................................................................................................... 135

Chapter 10: Firmware Updates .............................................................................................. 138

1: Firmware Menu....................................................................................................................................... 138

2: Major Control Firmware Updates ........................................................................................................... 138

3: Minor Control Firmware Updates ........................................................................................................... 141

4: Board Firmware Updates ........................................................................................................................ 143

Chapter 11: Troubleshooting ................................................................................................. 146

1: The Print Engine Does Not Turn On ........................................................................................................ 146

2: The Printer Does Not Print Anything ...................................................................................................... 146

3: Black Screen ............................................................................................................................................ 147

4: Startup Application Error ........................................................................................................................ 148

5: Platform did not lower upon startup ...................................................................................................... 148

6: Home Table Time Out ............................................................................................................................. 149

7: Home Carriage Time Out ........................................................................................................................ 150

8: Platform Did Not Lower/Engage ............................................................................................................. 151

9: Failed to Calibrate Head Drive Board Voltage ........................................................................................ 152

10: Horizontal Banding ................................................................................................................................ 154

11: Incorrect or Missing Colors ................................................................................................................... 154

12: Prints are Faint and there are Gaps ...................................................................................................... 155

13: Blurry or Smeared Prints ....................................................................................................................... 155

14: Color Image is Printing in Black Only .................................................................................................... 155

15: Printing is Too Slow ............................................................................................................................... 156

16: When the <PRINT> Button is Pressed, the Obstruction Sensor is Triggered ........................................ 156

17: Print Table Does Not Travel All the Way to the Front or Rear .............................................................. 156

18: The Print Head Nozzles Get Clogged Too Often ................................................................................... 157

19: Information to Provide Technical Support ............................................................................................ 158

20: How to Get Additional Help .................................................................................................................. 160

Appendices: .......................................................................................................................... 161

1: Appendix 1 .............................................................................................................................................. 161

2: Appendix 2 .............................................................................................................................................. 167

3: Appendix 3 .............................................................................................................................................. 168

4. Appendix 4 ………………………………………………………………………………………………………………………………………. 169

How to Read the Manuals

Disclaimer

Contents of this manual are subject to change without prior notice. To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or non-use of this product and operation manuals provided with it. Make sure that you always copy or have backups of the data registered in this machine. Documents or data might be erased due to your operational errors or malfunctions of the machine. In no event will the manufacturer be responsible for any documents created by you using this machine or any results from the data executed by you.

Notes

The manufacturer shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the manufacturer with your products. For good output quality, the manufacturer recommends that you use genuine ink from the manufacturer. Some illustrations in this manual might be slightly different from the machine. Certain options might not be available in some countries. For details, please contact your local dealer. Depending on which country you are in, certain units may be optional. For details, please contact your local dealer.

Safety Symbols for This Machine

Caution

Prohibition

General mandatory action sign

Do not touch

Caution, risk of having hands or arms caught

Caution, risk of electric shock

Caution, hot surface

Warning; Laser beam

The meanings of the safety symbols for this machine are as follows:

Safety Information for This Machine

Safety during operation

In this manual, the following important symbols are used:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

Safety Precautions to Be Followed

Environments where the machine can be used

• Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these

items in the vicinity of this machine. Doing so could result in fire or electric shock.

• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers

holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine.

• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

• Make sure the room where you are using the machine is well ventilated and spacious. Good

ventilation is especially important when the machine is used heavily. When you detect an odd smell, sufficiently ventilate and circulate the air in the room.

• Keep children away from the machine. Otherwise, their hands or fingers may be caught in the gap

and injury may result.

• Keep people other than operators away from the machine. Otherwise, their hands or fingers may

be caught in the gap and injury may result.

• Use at an altitude of 2000 m or less. There is a possibility of electric shock, electric leakage, and fire

if it is used in an environment exceeding 2000 m altitude.

Handling power cords and power plugs

• Do not use any power sources other than those that match the specifications shown in this

manual. Doing so could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could

result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords that

have been trapped under heavy objects, pulled hard, or bent severely. Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

• If the power cord is damaged and its inner wires are exposed or broken, contact your service

representative for a replacement. Use of damaged power cords could result in fire or electric shock.

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the following:

•There are burn marks on the plug.

•The prongs on the plug are deformed.

•The power cord's inner wires are exposed, broken, etc.

•The power cord's coating has a crack or dent.

•When bending the power cord, the power turns off and on.

•Part of the power cord becomes hot.

•The power cord is damaged.

•If any of the above conditions exist, do not use the plug and consult your dealer or service

representative. Use of the plug could result in fire or electric shock.

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.

Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock.

• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs create

an unstable connection that can result in unsafe buildup of heat.

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the

prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, always turn off the power switch on rear of the

machine.

Power source

• 100-240V, 2A, 50/60Hz Voltage must not fluctuate more than 10%. Please be sure to connect the power cable to a power source as above. For users in Norway, this product is also designed for an IT power distribution system with phase-to-phase voltage of 230V. Confirm that the wall outlet is near the machine and freely accessible, so that in event of an emergency, it can be unplugged easily.

Handling the main machine

• Keep infants away from polythene materials (bags, etc.) used to wrap the machine and its

accessories. Suffocation may result if polythene materials are brought into contact with the mouth or nose.

• If the machine emits smoke or odors, or if it behaves unusually, you must turn off its power

immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock.

• If metal objects, or water or other fluids fall inside this machine, you must turn off its power

• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could

result in electric shock.

• The machine weights around 81.6 kg (180 lb.).

• Four or more people are required to lift the printer. When moving the printer, lift it slowly so that

you do not strain yourself. Lifting the printer forcibly or handling it roughly to drop it will risk injury.

• Unplug the power cord from the wall outlet before you move the machine. While moving the

machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.

• Before installing or removing options, always turn off the power switch on rear of the machine

and allow time for the main unit to fully cool. Failing to take these precautions could result in burns.

• Before opening the top cover, please turn off the power switch on the back of the machine and

open it. Opening the cover without turning off the power may cause the machine to operate and cause injury.

• When opening and closing the top cover, be sure to hold the handle. Be careful so that your hand

or any other part of your body is not caught with the top cover.

• After opening the top cover, use the prop to keep the cover raised so that it does not close

unexpectedly. Otherwise, your hand caught may be caught between the cover and the machine.

• Make sure that the top cover is closed, and then turn on the power switch on the back of the

machine. Before closing the cover, turning on the power may cause the machine to operate and cause injury.

• Before turning on the power for the first time, remove the 2 retainer brackets that have labels

affixed. Turning on the power without removing them may cause the machine to malfunction.

• Follow the procedures in the user's manual for maintenance and securely install parts and covers.

Failure to do reliable work may cause injury or malfunction.

Handling the machine's interior

• Do not remove any covers or screws other than those explicitly mentioned in USER MANUAL.

• Before you remove the cover, turn off the power switch on rear of the machine. Removing the

cover with the power on or removing parts other than those explicitly referred to could result in electric shock.

• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.

• Do not open the cover while the machine is operating. Doing so might cause your hand or fingers

to get trapped in the machine, and an injury might occur.

Handling the machine's supplies

• Keep infants away from polythene materials (bags, etc.) used to wrap options and

cartridges/bottles for ink, cleaning solution, HV storage solution, and pretreatment liquid. Suffocation may result if polythene materials are brought into contact with the mouth or nose.

• When swallowing or inhaling ink, cleaning solution, HV storage solution or pretreatment liquid, or

when getting them in the eye, follow the guidance in the appropriate safety data sheet (SDS). Download the SDS from the AnaJet website at http://anajet.com/technical-documentation

• Place ink, cleaning solution, HV storage solution, and pretreatment liquid in a cool, well-ventilated

place out of the reach of children.

• Keep waste ink, containers for ink, cleaning solution, HV storage solution, and pretreatment

liquid, and components that have been in contact with ink out of the reach of children.

• When handling ink, cleaning solution, HV storage solution, or pretreatment liquid, avoid getting

anything on your clothing. If you do, wash the stained area with cold water.

• When replacing the cartridge for ink, cleaning solution, HV storage solution, or pretreatment

liquid, avoid getting anything on your clothing. If you do, wash the stained area with cold water.

• When replacing the cartridge for ink, cleaning solution, HV storage solution, or pretreatment

liquid, avoid getting anything on your skin. If you do, wash the affected area thoroughly with soap and water.

• When removing the cartridge for ink, cleaning solution, HV storage solution, or pretreatment

liquid, avoid putting your hand near the location in which the cartridge is installed (such as the ink supply nozzle and its surrounding areas). If you get anything on your hands, wash them thoroughly with soap and water.

• The ink cartridge surface may have ink on it, so be careful to avoid ink stains.

• Do not disassemble the cartridge for ink, cleaning solution, HV storage solution, or pretreatment

liquid. Doing so could leave ink stains or cleaning solution on your hands and fingers.

• When shaking the cartridge for ink, cleaning solution, HV storage solution, or pretreatment liquid,

be careful about safety of your surroundings and ink stains. Otherwise, injury or stains on household

items may result.

Adjustment

• When moving the Print Table, be careful so that your hands or fingers are caught with it.

Otherwise, injury may result.

• When adjusting the machine feet to level the machine, be careful so that your hand is not caught

between the machine foot and stand. If it is caught, injury may result.

Removing the Fabric

• When removing the fabric, be careful so that your hand or any other part of your body does not

come in contact with ink. If your skin comes in contact with ink, wash the affected area thoroughly with soap and water. If your clothing comes into contact with ink, wash the stained area with cold water.

Maintenance (Cleaning the Units and Disposing of Waste Ink)

• When maintenance is performed, the carriage may move while the top cover is open. Do not

to u ch the carriage while it is moving. Touching it may result in injury.

• Be sure to wear commercially available goggles and gloves when performing the following

maintenance:

• Cleaning the Maintenance Station and nozzle plates

• Cleaning and replacing the wiper blade

• Cleaning the left and right ink drip foam trays

• Replacing the drip pan foam

• Disposing of the waste ink (in the waste ink tank and auxiliary waste ink tank)

• Cartridge replacement

• When using a flat head screwdriver, be careful so that the tip of the flat head screwdriver does not

hurt you.

Safety Labels of This Machine

This section explains the machine’s safety information labels.

Positions of WARNING and CAUTION labels

This machine has labels for WARNING and CAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated.

Front

1. Do not reach far inside the unit. Moving parts inside may cause injury.

2. Do not reach far inside the unit. Moving parts inside may cause injury.

3. Keep your eyes away from the laser aperture so that the laser does not shine directly into your

eyes. The laser can cause injury.

Back

4. This printer uses a class 2 laser radiation. Regarding the position, refer to 3.

5. This label is meant for customer engineers.

Machine’s Interior

6. After opening the top cover, use the prop to keep the cover raised so that it does not close

unexpectedly. Otherwise, your hand may become caught between the cover and the machine.

7. Do not place your hand or fingers into the unit. The moving parts inside may cause injury.

8. Do not touch the circuit boards in from the part which a label indicated. Otherwise, an injury

may occur.

9. Do not place your hand on a part which a label indicates. Otherwise, there is a risk of your

hands becoming caught.

10. Remove the part indicated by the label before the machine is first turned on. Otherwise,

there is the risk of breakage of the machine.

11. Do not touch the circuit board. Doing so could result in injury.

12. Be careful so that your hand is not caught with the main scanning pulley. If it is caught, injury

may result.

Symbols for Power Switch

Symbols for power switch that are used for this machine are as follows:

 I: POWER ON  O: POWER OFF

User Notes

• During operation, do not touch the carriage. Do not put your hand into the gap between the top

cover and Print Table.

• For information about how to use the heat press device, see the manual.

• When removing the fabric, be careful so that your clothing is not stained with ink. If your clothing

comes into contact with ink, wash the stained area with cold water.

Other Information for This Machine

Laws and Regulations

Legal Prohibition

Do not copy or print any item for which reproduction is prohibited by law. Copying or printing the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses. The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.

FCC Statement (USA):

• Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Caution: Properly shielded and grounded cables and connectors must be used for connections to

host computer (and/or peripheral) in order to meet FCC emission limits.

User Information on Electrical and Electronic Equipment:

Caution: An AC adapter with ferrite core must be used for RF interference suppression.

Note to Users in California (USA):

• Perchlorate Material - special handling may apply. See:

www.dtsc.ca.gov/hazardouswaste/perchlorate

Laser Emitter Warning and Laser Aperture Warning

• The Obstruction Sensor detects any obstruction on the Print Table, such as wrinkles on the shirts, which can damage the print heads. On the left-hand side of the printer, there is an Obstruction Laser Diode, which generates the laser. On the right-hand side, there is the Obstruction Laser Sensor.

Laser (North America):

• This equipment complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 for class II laser product. This equipment contains one AlGaInP laser diode, 660 nanometer wavelength. The beam divergence angle is 21 degrees (minimum) and 29 degrees (maximum) in the vertical direction, and 7 degrees (minimum) and 11 degrees (maximum) in the horizontal direction, and laser beams are generated in ContinuousWave (CW) mode. The maximum output power of the light source is 1 milliwatt.

• WARNING: Although the laser used in the Ri 3000 and Ri 6000 printer is low power, exercise care so that laser does not shine directly into the eyes. The laser can cause injury.

• CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Mangled Hand Warning: Keep body parts away from gears and moving parts.

Laser (others)

• This machine complies with the requirements of IEC 60825-1:2014 (EN 60825-1:2014) for class 2 laser product. This equipment contains one AlGaInP laser diode, 660 nanometer wavelength. The beam divergence angle is 21 degrees (minimum) and 29 degrees (maximum) in the vertical direction, and 7 degrees (minimum) and 11 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous Wave (CW) mode. The maximum output power of the light source is 1 milliwatt.

• WARNING: Although the laser used in the Ri 3000 and Ri 6000 printer is low power, exercise care so that laser does not shine directly into the eyes. The laser can cause injury.

• CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Mangled Hand Warning: Keep body parts away from gears and moving parts.

Noise Levels

Component

Noise level

RICOH Ri 3000/6000

62 dB(A)

The following table quantifies the noise levels for various of RICOH Ri 3000/6000 system.

Chapter 1: Product Information

Printing Method:

Direct to Garment Inkjet Printing

Print Head Technology:

Print on demand piezoelectric inkjet

Printing Resolution:

600x300, 600x600, 1200x600 dpi

Print Channels:

6 (Cyan, Magenta, Yellow, Black and 2 channels of White)

Printable area:

14” x 18” (35.6cm x 45.7cm) Main Print Table

Mechanical:

Garment loading method: Ink Supply: Printer Dimensions: Adjustment: Weight:

Hooped Print Table Garment Path: Shuttling Print Table Sealed Ink Cartridges

19.8” x 42.3” x 44” (50.3 cmx 107.4 cm x 111.8 cm) Table Height Up to 2.30” (5.84 cm)

Approximately 180 lbs. (81.6 Kg)

Electrical:

Input Voltage Range: Input Frequency: Range Power Consumption: Altitude:

100 – 240V 50/60 Hz

2.0 A (maximum)

0.65 A (idling) 2000m or below

Congratulations on your purchase of a RICOH Ri 3000 or RICOH Ri 6000 Garment Printer. Ricoh is committed to providing our customers with the best in training materials and through this User Manual it is our aim to get you up and printing in the shortest time possible. For additional training, we recommend you contact your RICOH Ri 3000/ Ri 6000 dealer for additional training courses.

1: Printer Specifications

CAUTION

FCC Statement (USA):

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Caution: Properly shielded and grounded cables and connectors must be used for connections to host computer (and/or peripheral) in order to meet FCC emission limits.

User Information on Electrical and Electronic Equipment:

Caution: An AC adapter with ferrite core must be used for RF interference suppression.

Laser (US):

This equipment complies with the requirements of IEC60825-1:2014 for class 2 laser product. The beam divergence angle is 0.6 mRad (Half Angle). This equipment contains a 650 nanometer wavelength. The maximum output power of the light source is 1 milliwatt.

Note to Users in California (USA):

Perchlorate Material. Special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

Warning for Electrical and Electronic Equipment (For EU countries only):

This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause radio interference.

1) Properly shielded and grounded cables and connectors must be used for connections to a host

computer (and/or peripheral) in order to meet emission limits.

2) An AC adapter with a ferrite core must be used for RF interference suppression.

Laser (EU):

EMC Directive:

Warning on Class A Product

This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. As this machine is not a household appliance, it does not conform to ErP Directive 2009/125/EC which was revised in 2013.

User Information on Electrical & Electronic Equipment

Users in the countries where this symbol shown in this section has been specified in national law on collection and treatment of E-waste

Our products contain high quality components and are designed to facilitate recycling. Our products or product packaging are marked with the symbol below.

The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via the appropriate return and collection systems available. By following these instructions you ensure that this product is treated correctly and help to reduce potential impacts on the environment and human health, which could otherwise result from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment. For more detailed information on collection and recycling systems for this product, please contact the shop where you purchased it, your local dealer or sales/service representatives

All Other Users

If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/service representatives.

For Turkey only

CE Marking Traceability Information (For EU Countries Only)

Manufacturer:

RICOH Company, Ltd.

3-6 , Nakamagome 1-chome,

Ohtaku, Tokyo 143-8555, Japan

Importer:

Ricoh Europe PLC 20 Triton Street, London. NW1 3BF, United Kingdom RICOH Company, Ltd.

Note for the Battery and/or Accumulator Symbol (For EU countries only)

In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex ll, the above symbol is printed on batteries and accumulators. This symbol means that in the European Union, used batteries and accumulators should be disposed of separately from your household waste. In the EU, there are separate collection systems for not only used electrical and products but also batteries and accumulators. Please dispose of them correctly at your local community waste collection/recycling centre.

+ 143 hidden pages

Ricoh Ri 3000, Ri 6000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual