Page 1
MODIFICATION BULLETIN NO. 1 PAGE 1 OF 1
ISSUED ON: December 31, ’95
Model J2SS Roll Feeder Volt/Hz
Modified Article
Reason for
Modification
Both End Frames of the Cutter Unit.
To improve reliability
No serial number cut-in information
The thickness of both end fra mes of the cutter unit and the cushion s on th e frames has been increased.
Old P/N New P/N Description Q’ty Used
A571 7626 A571 7627 Cushion
A571 7630 A571 7635 Left Frame
A571 7620 A571 7628
Right Frame
2 → 2
1 → 1
1 → 1
Inter-
change-
ability
O/O 9 13
O/O 10 13
O/O 11 13
Index No. Page
Parts Catalog
Date of
Modification
Serial Number
M. Iwasa, Manager
Technical Support Department
Page 2
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 2
108
ISSUED ON: May 31, ’96
Model J2SS Roll Feeder Volt/Hz
Modified Article
Reason for
Modification
Parts Catalog
Parts Catalog Correction
1. Addition and illustration correctio n.
New P/N Description Q’ty Used
AJ03 0005 Cutter Unit 1 * 13
0720 0030Z Retaining Ring - M3 1 108 13
Index No. Page
Date of
Modification
No serial number cut-in information.
Parts Catalog
Serial Number
Page 3
2. Quantity correction
T. Inoue, General Ma nager
1st Field Information Dept . QAC
MODIFICATION BULLETIN NO. 2 PAGE 2 OF 2
ISSUED ON: May 31, ’96
P/N Description
A571 7647 Cutter Drive Wire 1 2 7 13
Incorrect
Q’ty Used
Correct
Q’ty Used
Index No. Page
Parts Catalog
3. Illustration correction (Page 12)
1
106
1
Page 4
MODIFICATION BULLETIN NO. 3 PAGE 1 OF 1
ISSUED ON: October 31, ’96
Model J2SS Roll Feeder Volt/Hz
Modified Article Brake - Paper Spool Unit No serial number cut-in information.
Reason for
To facilitate the manufacturing process
Modification
Inter-
Old P/N New P/N Description Q’ty Used
A454 2707 A571 7453 Brake - Paper Spool Unit
1 → 1
change-
ability
O/O 3 7
Index No. Page
Date of
Modification
Parts Catalog
Serial Number
T. Inoue, General Manager
QAC 1st Field Information Dept.
Page 5
M
Model:
J2SS I&II Roll Feeder
odification
B
Date:
ulletin
15-Jul-98
No:
PAGE: 1/2
4
Modified Article:
From:
Reason for
Modification:
The part number of the small cap in the parts catalog is incorrect.
Please correct your parts catalog as follows:
Incorrect P/N Correct P/N Description Index Page
QAC Field Information Dept.
A5717479 A5717497 Sm all Cap ( A163RIC/NRG)(A251/A252) 19 3
Parts Catalog
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
Prepared by:
To meet standards
H.Kobayashi
( )
Page 6
M
Model:
MODEL NAME V/ Hz DESTINATION CODE SERIAL NUMBER
RICOH ROLL
FEEDER TYPE 740
(A163)
OZALID 1001 RF
(A163)
REGMA 910 ROLL
FEEDER (A163)
K+ E 3036RF (A163) 115/ 60 USA, CANADA A571 - 03
RICOH ROLL
FEEDER TYPE 740
(A163)
RICOH ROLL
FEEDER TYPE 740
(A163)
ROLL FEEDER
TYPE 740
(A251/A252)
ROLL FEEDER
TYPE 740
(A251/A252)
J2SS I&II Roll Feeder
230,240/50 EUROPE A571 - 00
220,230,240/50 EUROPE A571 - 01
220,230,240/ 50 EUROPE A571 - 02
220,230,240/50 ASIA A571 - 04
115/ 60 USA, CANADA A571 - 05
115/ 60 USA, CANADA A571 - 06
220,230,240/50 EUROPE, ASIA A571 - 07
odification
B
Date:
ulletin
15-Jul-98
No:
PAGE: 2/2
4
Loading...