VOLTAGE REGULATOR
R×5RL SERIES
APPLICATION MANUAL
NO.EA-022-0006
VOLTAGE REGULATOR
R×5RL SERIES
1
OUTLINE
The R×5RL Series are voltage regulator ICs with high accuracy output voltage and ultra-low quiescent cur-
rent by CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, a driver tran-
sistor, and resistors for setting output voltage. The output voltage is fixed with high accuracy.
Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.
• Ultra-low Quiescent Current
...........................
TYP. 1.1µA (R
×5RL30A, VIN=5.0V)
• Small Dropout Voltage
.....................................
TYP. 30mV (R
×5RL50A, IOUT=1mA)
• Low Temperature-Drift Coefficient of Output Voltage
...............
TYP. ±100 ppm/˚C
• Excellent Line Regulation
.................................
TYP. 0.1%/V
• Output Voltage
..................................................
Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V
is possible (refer to Selection Guide).
• High Accuracy Output Voltage
.........................
±2.5%
• Three Types of Packages
...................................
TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold)
FEATURES
APPLICATIONS
• Power source for battery-powered equipment.
• Power source for cameras, video instruments such as camcorders, VCRs, and hand- held communication equipment.
• Precision voltage references.
BLOCK DIAGRAM
2
1
3
Vref
V
OUT
GND
V
IN
–
+
1
R×5RL
2
SELECTION GUIDE
The package type, the output voltage, the packing type, and the taping type of R×5RL Series can be
designated at the user's request by specifying the part number as follows:
For example, the product with Package Type SOT-89, Output Voltage 5.0V, Version A,and Taping Type T1 are
designated by Part Number RH5RL50AA-T1.
Code Contents
Designation of Package Type:
a
E: TO-92
H: SOT-89 (Mini-power Mold)
N: SOT-23-5 (Mini-mold)
b
Setting Output Voltage (V
OUT):
Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is possible.
cA
Designation of Packing Type:
d A: Taping
C: Antistatic bag for TO-92 and samples
Designation of Taping Type:
Ex. TO-92 : RF, RR, TZ
e
SOT-89 : T1, T2
SOT-23-5 : TR, TL
(refer to Taping Specifications)
“TZ”, “T1”, and “TR” are prescribed as standard directions.
R×5RL×××× – ×× ← Part Number
↑↑↑↑↑
abcde
}
}
R×5RL
3
•
TO-92
PIN CONFIGURATION
•
SOT-89
•
SOT-23-5
PIN DESCRIPTION
• TO-92 • SOT-89 • SOT-23-5
Pin No. Symbol
1 GND
2VIN
3VOUT
4NC
5NC
Pin No. Symbol
1 GND
2VIN
3VOUT
Pin No. Symbol
1 GND
2VIN
3VOUT
12
3
(mark side)
12
3
(mark side)
12
3
(mark side)
5
4
R×5RL
4
ABSOLUTE MAXIMUM RATINGS
Symbol Item
VIN Input Voltage
VOUT Output Voltage
IOUT Output Current
PD1 Power Dissipation 1 (NOTE1)
PD2 Power Dissipation 2 (NOTE2)
Topt Operating Temperature
Tstg Storage Temperature
Tsolder Lead Temperature (Soldering)
Rating Unit
+12 V
–0.3 to VIN +0.3 V
150 mA
300 mW
150 mW
– 40 to +85 ˚C
– 55 to +125 ˚C
260˚C,10s
Topt=25˚C
Absolute Maximum ratings are threshold limit values that must not be exceeded even for an instant under any
conditions. Moreover, such values for any two items must not be reached simultaneously. Operation above
these absolute maximum ratings may cause degradation or permanent damage to the device. These are stress
ratings only and do not necessarily imply functional operation below these limits.
ABSOLUTE MAXIMUM RATINGS
(NOTE 1) applied to SOT-89 and TO-92
(NOTE 2) applied to SOT-23-5
R×5RL
5
ELECTRICAL CHARACTERISTICS
• R×5RL20A
Symbol Item
VOUT Output Voltage
IOUT Output Current
∆V
OUT
Load Regulation
∆IOUT
VDIF Dropout Voltage
ISS Quiescent Current
∆V
OUT
∆VIN
Line Regulation
VIN Input Voltage
∆V
OUT Output Voltage
∆Topt Temperature Coefficient
Conditions MIN. TYP. MAX. Unit
VIN=4.0V
1.950 2.000 2.050 V
10
µA
≤IOUT≤10mA
VIN=4.0V 25 35 mA
V
IN=4.0V
1mA≤IOUT≤35mA
30 45 mV
IOUT=1mA 60 90 mV
VIN=4.0V 1.0 3.0
µ
A
I
OUT=1mA
VOUT+0.5V≤VIN≤10V
0.05 0.2 %/V
10 V
I
OUT=10mA
±100 ppm/˚C
–40˚C≤Topt≤85˚C
Topt=25˚C
• R×5RL30A
Topt=25˚C
Symbol Item
VOUT Output Voltage
IOUT Output Current
∆V
OUT
Load Regulation
∆
I
OUT
VDIF Dropout Voltage
ISS Quiescent Current
∆V
OUT
∆
V
IN
Line Regulation
VIN Input Voltage
∆V
OUT Output Voltage
∆
Topt Temperature Coefficient
Conditions MIN. TYP. MAX. Unit
VIN=5.0V
2.925 3.000 3.075 V
10µA≤IOUT≤10mA
VIN=5.0V 35 50 mA
V
IN=5.0V
1mA≤IOUT≤50mA
40 60 mV
IOUT=1mA 40 60 mV
VIN=5.0V 1.1 3.3 µA
I
OUT=1mA
VOUT
+
0.5V≤V
IN≤10V
0.05 0.2 %/V
10 V
I
OUT=10mA
±100 ppm/˚C
–40˚C≤Topt≤85˚C
R×5RL
6
• R
×5RL50A
Topt=25˚C
• R×5RL40A
Topt=25˚C
Symbol Item
VOUT Output Voltage
IOUT Output Current
∆V
OUT
Load Regulation
∆IOUT
VDIF Dropout Voltage
ISS Quiescent Current
∆V
OUT
∆VIN
Line Regulation
VIN Input Voltage
∆V
OUT Output Voltage
∆Topt Temperature Coefficient
Conditions MIN. TYP. MAX. Unit
VIN=6.0V
3.900 4.000 4.100 V
10µA≤IOUT≤10mA
VIN=6.0V 45 65 mA
V
IN=6.0V
1mA≤IOUT≤65mA
50 75 mV
IOUT=1mA 25 38 mV
VIN=6.0V 1.2 3.6 µA
I
OUT=1mA
VOUT
+
0.5V≤V
IN≤10V
0.05 0.2 %/V
10 V
I
OUT=10mA
±100 ppm/˚C
–40˚C≤Topt≤85˚C
Symbol Item
VOUT Output Voltage
IOUT Output Current
∆V
OUT
Load Regulation
∆IOUT
VDIF Dropout Voltage
ISS Quiescent Current
∆V
OUT
∆VIN
Line Regulation
VIN Input Voltage
∆V
OUT Output Voltage
∆Topt Temperature Coefficient
Conditions MIN. TYP. MAX. Unit
VIN=7.0V
4.875 5.000 5.125 V
10µA≤IOUT≤10mA
VIN=7.0V 55 80 mA
V
IN=7.0V
1mA≤IOUT≤80mA
60 90 mV
IOUT=1mA 25 38 mV
VIN=7.0V 1.3 3.9 µA
I
OUT=1mA
VOUT
+
0.5V≤V
IN≤
10
V
0.05 0.2 %/V
10 V
I
OUT=10mA
±100 ppm/˚C
–40˚C≤Topt≤85˚C
R×5RL
7
• R
×5RL60A
Topt=25˚C
Symbol Item
VOUT Output Voltage
IOUT Output Current
∆V
OUT
Load Regulation
∆IOUT
VDIF Dropout Voltage
ISS Quiescent Current
∆V
OUT
∆VIN
Line Regulation
VIN Input Voltage
∆V
OUT Output Voltage
∆Topt Temperature Coefficient
Conditions MIN. TYP. MAX. Unit
VIN=8.0V
5.850 6.000 6.150 V
10µA≤IOUT
≤
10mA
VIN=8.0V 55 80 mA
V
IN=8.0V
1mA≤IOUT≤80mA
60 90 mV
IOUT=1mA 25 38 mV
VIN=8.0V 1.3 3.9 µA
I
OUT=1mA
VOUT
+
0.5V≤V
IN≤10V
0.05 0.2 %/V
10 V
I
OUT=10mA
±100 ppm/˚C
–40˚C≤T
OPt≤85˚C
R×5RL
8
ELECTRICAL CHARACTEISTICS BY OUTPUT VOLTAGE
VIN–
V
OUT
=2.0V
25 35 30 45
1mA≤
I
OUT
≤35mA
VIN–
V
OUT
=2.0V
35 50 40 60
1mA≤
I
OUT
≤50mA
VIN–
VOUT
=2.0V
45 65 50 70
1mA≤
I
OUT
≤65mA
VIN–
VOUT
=2.0V
55 80 60 90
1mA≤
I
OUT
≤80mA
R×5RL20A 1.950 2.000 2.050
R×5RL21A 2.048 2.100 2.152
R×5RL22A 2.145 2.200 2.255
R×5RL23A 2.243 2.300 2.357
R×5RL24A 2.340 2.400 2.460
R×5RL25A 2.438 2.500 2.562
R×5RL26A 2.535 2.600 2.665
R×5RL27A 2.633 2.700 2.767
R×5RL28A 2.730 2.800 2.870
R×5RL29A 2.828 2.900 2.972
R×5RL30A 2.925 3.000 3.075
R×5RL31A 3.023 3.100 3.177
R×5RL32A 3.120 3.200 3.280
R×5RL33A 3.218 3.300 3.382
R×5RL34A 3.315 3.400 3.485
R×5RL35A 3.413 3.500 3.587
R×5RL36A 3.510 3.600 3.690
R×5RL37A 3.608 3.700 3.792
R×5RL38A 3.705 3.800 3.895
R×5RL39A 3.803 3.900 3.997
R×5RL40A 3.900 4.000 4.100
R×5RL41A 3.998 4.100 4.202
R×5RL42A 4.095 4.200 4.305
R×5RL43A 4.193 4.300 4.407
R×5RL44A 4.290 4.400 4.510
R×5RL45A 4.388 4.500 4.612
R×5RL46A 4.485 4.600 4.715
R×5RL47A 4.583 4.700 4.817
R×5RL48A 4.680 4.800 4.920
R×5RL49A 4.778 4.900 5.022
R×5RL50A 4.875 5.000 5.125
R×5RL51A 4.973 5.100 5.227
R×5RL52A 5.070 5.200 5.330
R×5RL53A 5.168 5.300 5.432
R×5RL54A 5.265 5.400 5.535
R×5RL55A 5.363 5.500 5.637
R×5RL56A 5.460 5.600 5.740
R×5RL57A 5.558 5.700 5.842
R×5RL58A 5.655 5.800 5.945
R×5RL59A 5.753 5.900 6.047
R
×
5RL60A 5.850 6.000 6.150
Output Voltage OutputCurrent Load Regulation
Part Number
V
OUT(V) IOUT(mA) ∆VOUT(mV)
Conditions
MIN. TYP. MAX.
Conditions
MIN. TYP.
Conditions
TYP. MAX.
VIN–
VOUT
=2.0V
10µA≤
I
OUT
≤10mA
VIN–
V
OUT
=2.0V
60 90
50 75
40 60
35 53
30 45
I
OUT
=1mA
25 38
Dropout Voltage
V
DIF (mV)
Conditions
TYP. MAX.
R×5RL
9
1.0 3.0
1.1 3.3
I
OUT
=1mA IOUT
VIN =10mA
V
OUT 0.05 0.2 10 ±100
=2.0V
V
OUT+
–40˚C≤
0.5V≤ Topt
V
IN≤ 85˚C
1.2 3.6 ≤10V
1.3 3.9
Quiescent Current Line Regulation
Input VoltageOutput Voltage Tempco.
Iss(µA) ∆VOUT/∆VIN(%/V) VIN(V)
∆VOUT/∆T(ppm/˚C)
Conditions
TYP. MAX.
Conditions
TYP. MAX. MAX.
Conditions
TYP.
Topt=25˚C
R×5RL
10
OPERATION
Output Voltage VOUT divided at the node between
Registers R1 and R2 is compared with Reference Voltage
by Error Amplifier, so that a constant voltage is output.
TEST CIRCUITS
FIG. 2 Test Circuit
FIG. 3 Quiescent Current Test Circuit
FIG. 4 Line Transient Response Test Circuit
FIG. 1 Brock Diagram
GNDGND
V
IN
+
–
Error Amplifire
V
OUT
R2
R1
Vref
CI
1µF
Co
1µF
V
IN
GND
R×5RL
SERIES
VOUT
IOUT
VOUT
VIN
+ +
Ro
Co
0.1µF
P.G
GND
R×5RL
SERIES
VOUT
VOUT
VIN
+
ISS
CI
1µF
V
IN
GND
R×5RL
SERIES
VOUT
VIN
+
R×5RL
11
R
×5RL30A
TYPICAL CHARACTERISTICS
1) Output Voltage vs. Output Current
R
×5RL30A
R
×5RL40A
R
×5RL50A
2) Output Voltage vs. Input Voltage
R
×5RL30A
Output Voltage VOUT(V)
Output Current IOUT(mA)
2.7
2.8
2.9
3.1
3.0
V
IN=5.0V
0 20 40 60 80 100 120 140
Topt=−40˚C
85˚C
25˚C
Output Current IOUT(mA)
Output Voltage VOUT(V)
050
4.7
4.8
4.9
5.0
5.1
V
IN=7.0V
100 150 200
85˚C
25˚C
Topt=−40˚C
2.5 3.0 3.5
2.2
2.4
2.6
2.8
3.0
3.2
IOUT=1mA
Output Voltage VOUT(V)
Topt=25˚C
Input Voltage V
IN(V)
5mA
10mA
Output Current IOUT(mA)
Output Voltage VOUT(V)
0
3.7
3.8
3.9
4.1
4.0
VIN=6.0V
20 40 60 80
100 120 140 160 180
Topt=−40˚C
85˚C
25˚C
34 5678910
2.95
2.96
2.97
2.98
2.99
3.00
3.01
3.02
3.03
3.04
3.05
Input Voltage V
IN(V)
Output Voltage VOUT(V)
IOUT=1mA
Topt=25˚C
R×5RL
12
R
×5RL40A
R
×5RL50A R×5RL50A
R
×5RL30A
3) Dropout Voltage vs. Output Curret
R
×5RL40A
R
×5RL40A
3.5 4.0 4.5
3.2
3.4
3.6
3.8
4.0
4.2
IOUT=1mA
Output Voltage VOUT(V)
Topt=25˚C
5mA
10mA
Input Voltage VIN(V)
4.5 5.0 5.5
4.2
4.4
4.6
4.8
5.0
5.2
IOUT=1mA
Output Voltage VOUT(V)
Topt=25˚C
Input Voltage V
IN(V)
5mA
10mA
Output Current IOUT(mA)
Dropout Voltage VDIF(V)
0 1020304050
0.0
0.4
0.6
0.2
0.8
1.0
1.2
1.4
1.6
1.8
2.0
25˚C
85˚C
Topt=−40˚C
Input Voltage VIN(V)
45678910
3.95
3.96
3.97
3.98
3.99
4.00
4.01
4.02
4.03
4.04
4.05
Output Voltage VOUT(V)
IOUT=1mA
Topt=25˚C
5
6
78
9
10
4.95
4.96
4.97
4.98
4.99
5.00
5.01
5.02
5.03
5.04
5.05
Input Voltage V
IN(V)
Output Voltage VOUT(V)
IOUT=1mA
Topt=25˚C
Output Current IOUT(mA)
Dropout Voltage VDIF(V)
01020304050
0.0
0.4
0.6
0.2
0.8
1.0
1.2
1.4
1.6
1.8
2.0
85˚C
Topt=−40˚C
25˚C
13
R×5RL
R×5RL50A
R
×5RL30A
R
×5RL40A
R
×5RL50A
4) Output Voltage vs.Temperature
Output Current IOUT(mA)
Dropout Voltage VDIF(V)
0 10 20 30 40 50
0.0
0.4
0.6
0.2
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Topt=−40℃
25℃
85℃
IOUT=10mA
V
IN=5.0V
–40 –20
Temperature Topt(˚C)
0 20 40 60 80 100
2.90
2.92
2.94
2.96
2.98
3.00
3.02
3.04
3.06
3.08
3.10
Output Voltage VOUT(V)
IOUT=10mA
V
IN=7.0V
–40 –20
Temperature Topt(˚C)
0 20 40 60 80 100
4.90
4.92
4.94
4.96
4.98
5.00
5.02
5.04
5.06
5.08
5.10
Output Voltage VOUT(V)
IOUT=10mA
V
IN=6.0V
–40 –20
Temperature Topt(˚C)
0 20 40 60 80 100
3.90
3.92
3.94
3.96
3.98
4.00
4.02
4.04
4.06
4.08
4.10
Output Voltage VOUT(V)
R×5RL
14
R
×5RL30C
5) Quiescent Current vs. Input Voltage
R
×5RL50A
R
×5RL40A
R
×5RL30A
R
×5RL40A
6) Quiescent Current vs. Temperature
345678910
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
Quiescent Current Iss(µA)
Topt=25˚C
Input Voltage V
IN(V)
45678 910
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
Quiescent Current Iss(µA)
Topt=25˚C
Input Voltage V
IN(V)
–40 –20
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
Quiescent Current Iss(µA)
Temperature Topt(˚C)
V
IN=5.0V
0 20 40 60 80 100
5678910
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
Quiescent Current Iss(µA)
Topt=25˚C
Input Voltage V
IN(V)
–40 –20
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
Quiescent Current Iss(µA)
Temperature Topt(˚C)
V
IN=6.0V
0 20 40 60 80 100
15
R×5RL
R×5RL50A
7) Dropout Voltage vs. Set Output Voltage
9) Line Transient Response (2)
8) Line Transient Response (1)
–40 –20
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
Quiescent Current Iss(µA)
Temperature Topt(˚C)
V
IN=7.0V
020
40 60
80
100
012345
6
0.0
0.2
0.1
0.3
0.4
0.5
0.6
0.7
Set Output Voltage Vreg(V)
Dropout Voltage VDIF(V)
5mA
1mA
IOUT=10mA
01234
4.0
5.0
4.5
5.5
6.0
6.5
7.0
7.5
8.0
Input Voltage/Output Voltage(V)
IOUT=1mA
Time t(ms)
Output Voltage
Input Voltage
01234
4.0
5.0
4.5
5.5
6.0
6.5
7.0
7.5
8.0
Input Voltage/Output Voltage(V)
IOUT=10mA
Time t(ms)
Input Voltage
Output Voltage
R×5RL
16
TYPICAL APPLICATION
In R×5RL Series, a constant voltage can be obtained
without using Capacitors C1 and C2. However, when the
wire connected to Vin is long, use Capacitor C1. Output
noise can be reduced by using Capacitor C2.
Insert Capacitors C1 and C2 with the capacitance of
0.1µF to 2.0µF between Input/Output Pins and GND Pin
with minimum wiring.
As shown in the circuit diagram, a dual power sup-
ply circuit can be constructed by using two R
×5RL
Series.
This circuit diagram shows a dual power supply
circuit with an output of 3V and an output of 5V.
When the minimum output current of IC2 is larger
than I
SS of IC1, Resistor R is unnecessary. Diode D is
a protection diode for the case where V
OUT2 becomes
larger than V
OUT1.
• VOLTAGE BOOST CIRCUIT
• DUAL POWER SUPPLY CIRCUIT
C2
C1
V
IN
GND
GND
GND
R
×5RL
SERIES
VOUT
VOUT
VIN
+
+
C2
C1
V
IN
GND
R
×5RL
SERIES
VOUT
VOUT
VIN
R1
R2
ISS
+
+
C1
C2
V
IN
GND
GND
GND
R
×5RL20A
R×5RL30A
VOUT
VOUT1
5V
V
OUT2
3V
V
IN
C3
GND
VOUT
VIN
R
I
SS
IC1
IC2
D
+
+
+
The output voltage can be obtained by the follow-
ing formula :
V
OUT=Vreg · (1+R2/R1) + ISS R · 2
Since the quiescent current of R
×5RE Series is so
small that the resistances of R1 and R2 can be set as
large as several hundreds kΩ and therefore the sup-
ply current of “Voltage Boost Circuit” itself can be
reduced.
Furthermore, since R
×5RL Series are operated by
a constant voltage, the supply current of “Voltage
Boost Circuit” is not substantially affected by the
input voltage.
*
1) Vreg : Set Output Voltage of R×5RL Series.
*
1
APPLICATION CIRCUITS
R×5RL
17
• CURRENT BOOST CIRCUIT
Output current of 60mA or more can be obtained by
the current boost circuit constructed as shown in this cir-
cuit diagram.
• CURRENT BOOST CIRCUIT WITH OVERCURRENT LIMIT CIRCUIT
A circuit for protecting Tr.1 from the destruction
caused by output short-circuit or overcurrent is shown in
this circuit diagram.
When the voltage reduction caused by the current ( aa
I
OUT) which flows through R2 reaches Vbe2 of Tr.2 by
additionally providing the current boost circuit with Tr.2
and R2, Tr.2 is turned ON and the base current of Tr.1 is
increased, so that the output current is limited.
Current limit of Overcurrent Limit Circuit is obtained
as follows :
I
OUT Vbe2/R2
• CURRENT SOURCE
A current source with the structure as shown in this
circuit diagram can be used. Output Current I
OUT is
obtained as follows :
I
OUT= Vreg /R + ISS
Take care that Output Current IOUT does not exceed
its allowable current.
C2
GND
GND
GND
R
×5RL
SERIES
VOUT
VOUT
C1
VIN
VIN
Tr.1
+
+
C2
GND
GND
GND
R×5RL
SERIES
VOUT
VOUT
C1
VIN
VIN
Tr.1
Tr.2
R1
R2
I
OUT
Vbe2
+
+
GND
R
×5RL
SERIES
C1
VIN
VIN
R
I
OUT
ISS
VOUT
+
*
1) Vreg : Set Output Voltage of R×5RL Series.
*
1
Loading...