Ricoh RDC-6000 User Manual

Page 1
ERASING
Chapter
4
Erasing a File (Image)........................................... 86
Erase ................................................................. 86
Erase All Images.............................................. 87
Erase Selected Files (Images) ....................... 88
Page 2
This section explains how to erase recorded files. There are three ways to erase files: single file deletion, deletion of all files and deletion of multiple specified files.
Important
Note
• Remember that files cannot be restored once they are erased. Before starting to erase a file, make sure that you want to erase it.
• Files on a write-protected SmartMedia memory card cannot be erased
Note
unless the write protect pad is removed from the card. See “Protecting Against Accidental Writing” (p.29).
• Depending on the SmartMedia capacity, it may take a short time to erase a file after turning on the power or changing the mode dial.
Erase
The selected file is erased.
q Set the mode dial to [ ].
An erase menu will be displayed.
w Press the ▼ or button to select
[SINGLE IMAGE] and press the ENTER
Select
button.
e Press the ▼ or button to select an
image file to erase, and press the shutter release button.
The image file selected is erased. If you want to erase more files, repeat step e above.
86
MENU[ERASE]
SINGLE
IMAGES
ALL SELECTED
ERASE SINGLE
START:RELEASE
EXIT
IMAGE
IMAGE
IMAGES
Select
1/12
Page 3
r Press the CANCEL
EXIT
button.
The erase menu is displayed again.
When a lower numbered file is erased, the higher numbers are reassigned.
Note
Files which have been set in Protect mode cannot be erased until they are unprotected. See Protecting a File (p.80).
Erase All Images
All recorded files are erased.
q Set the mode dial to [ ].
w Press the or button to select [ALL
IMAGES] and press the ENTER button.
Select
MENU[ERASE]
SINGLE
IMAGES
ALL
SELECTED
IMAGE
IMAGES
Select
4
Erasing
e Press the shutter release button.
All the files are erased, and return to erase menu.
High-capacity SmartMedia cards or larger number of files may take a long
Note
time to erase.
Files which have been set in Protect mode cannot be erased until they are unprotected. See Protecting a File (p.80).
MENU
[ERASE]
ERASE
IMAGES?
START:RELEASE
EXIT
ALL
87
Page 4
Erase Selected Files (Images)
Erases multiple selected image files.
q Set the mode dial to [ ].
w Press the or button to select
[SELECTED IMAGES] and press the ENTER
The screen will change to 6-screen display.
Select
button.
e Press the ▼ or button to select an
image file to erase and press the ENTER
Select
button.
The image file is designated by the ( ) mark. To select more files, repeat step e as many times as needed.
To cancel selected file bearing the
Note
mark, press the ENTER
Select
key
again.
r Press the shutter release button.
The image files selected are erased. The erase menu is displayed again after erasing the selected files.
Files may take time to erase, depending on the capacity of the SmartMedia
Note
memory card mounted and the file type.
Files which have been set in Protect mode cannot be erased until they are unprotected. See Protecting a File (p.80).
MENU[ERASE]
SINGLE ALL
SELECTED
12
456
IMAGE
IMAGES
IMAGES
AVI AVI
START:RELEASE
EXIT
Select
3
Select
88
Loading...