Ricoh R5RL User Manual
ELECTRONIC DEVICES DIVISION
VOLTAGE REGULATOR
R×5RL SERIES
APPLICATION MANUAL
NO.EA-022-9803
NOTICE
1. The products and the product specifications described in this application manual are subject to change or discontinuation of production without notice for reasons such as improvement. Therefore, before deciding to use
the products, please refer to Ricoh sales representatives for the latest information thereon.
2. This application manual may not be copied or otherwise reproduced in whole or in part without prior written consent of Ricoh.
3. Please be sure to take any necessary formalities under relevant laws or regulations before exporting or otherwise taking out of your country the products or the technical information described herein.
4. The technical information described in this application manual shows typical characteristics of and example
application circuits for the products. The release of such information is not to be construed as a warranty of or a
grant of license under Ricoh's or any third party's intellectual property rights or any other rights.
5. The products listed in this document are intended and designed for use as general electronic components in
standard applications (office equipment, computer equipment, measuring instruments, consumer electronic
products, amusement equipment etc.). Those customers intending to use a product in an application requiring
extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of
the product could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system, traffic
control system, automotive and transportation equipment, combustion equipment, safety devices, life support
system etc.) should first contact us.
6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor
products are likely to fail with certain probability. In order prevent any injury to persons or damages to property
resulting from such failure, customers should be careful enough to incorporate safety measures in their design,
such as redundancy feature, fire-containment feature and fail-safe feature. We do not assume any liability or
responsibility for any loss or damage arising from misuse or inappropriate use of the products.
7. Anti-radiation design is not implemented in the products described in this application manual.
8. Please contact Ricoh sales representatives should you have any questions or comments concerning the products or the technical information.
June 1995
OUTLINE
......................................................................................................
1
FEATURES
....................................................................................................
1
APPLICATIONS
.............................................................................................
1
BLOCK DIAGRAM
.........................................................................................
1
SELCTION GUIDE
.........................................................................................
2
PIN CONFIGURATION
...................................................................................
3
PIN DESCRIPTION
........................................................................................
3
ABSOLUTE MAXIMUM RATINGS
...................................................................
4
ELECTRICAL CHARACTERITICS
...................................................................
5
ELECTRICAL CHARACTERITICS BY OUTPUT VOLTAGE
...............................
8
OPERATION
................................................................................................
10
TEST CIRCUITS
...........................................................................................
10
TYPICAL CHARACTERISTICS
......................................................................
11
1) Output Voltage vs. Output Current
..................................................................
11
2) Output Voltage vs. Input Voltage
.....................................................................
11
3) Dropout Voltage vs. Output Current
.................................................................
12
4) Output Voltage vs. Temperature
.....................................................................
13
5) Quiescent Current vs. Input Voltage
................................................................
14
6) Quiescent Current vs. Temperature
.................................................................
14
7) Dropout Voltage vs. Set Output Voltage
............................................................
15
8) Line Transient Response (1)
.........................................................................
15
9) Line Transient Response (2)
.........................................................................
15
TYPICAL APPLICATION
...............................................................................
16
APPLICATION CIRCUITS
.............................................................................
16
PACKAGE DIMENSIONS
..............................................................................
18
TAPING SPECIFICATIONS
...........................................................................
19
R×5RL SERIES
APPLICATION MANUAL
CONTENTS
VOLTAGE REGULATOR
R×5RL SERIES
1
OUTLINE
The R×5RL Series are voltage regulator ICs with high accuracy output voltage and ultra-low quiescent cur-
rent by CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, a driver tran-
sistor, and resistors for setting output voltage. The output voltage is fixed with high accuracy.
Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.
• Ultra-low Quiescent Current
...........................
TYP. 1.1µA (R
×5RL30A, VIN=5.0V)
• Small Dropout Voltage
.....................................
TYP. 30mV (R
×5RL50A, IOUT=1mA)
• Low Temperature-Drift Coefficient of Output Voltage
...............
TYP. ±100 ppm/˚C
• Excellent Line Regulation
.................................
TYP. 0.1%/V
• Output Voltage
..................................................
Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V
is possible (refer to Selection Guide).
• High Accuracy Output Voltage
.........................
±2.5%
• Three Types of Packages
...................................
TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold)
FEATURES
APPLICATIONS
• Power source for battery-powered equipment.
• Power source for cameras, video instruments such as camcorders, VCRs, and hand- held communication equipment.
• Precision voltage references.
BLOCK DIAGRAM
2
1
3
Vref
V
OUT
GND
V
IN
–
+
1
2
SELECTION GUIDE
The package type, the output voltage, the packing type, and the taping type of R× 5RL Series can be
designated at the user's request by specifying the part number as follows:
For example, the product with Package Type SOT-89, Output Voltage 5.0V, Version A,and Taping Type T1 are
designated by Part Number RH5RL50AA-T1.
Code Contents
Designation of Package Type:
a
E: TO-92
H: SOT-89 (Mini-power Mold)
N: SOT-23-5 (Mini-mold)
b
Setting Output Voltage (V
OUT):
Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is possible.
c A
Designation of Packing Type:
d A: Taping
C: Antistatic bag for TO-92 and samples
Designation of Taping Type:
Ex. TO-92 : RF, RR, TZ
e
SOT-89 : T1, T2
SOT-23-5 : TR, TL
(refer to Taping Specifications)
“TZ”, “T1”, and “TR” are prescribed as a standard.
R×5RL×××× – ×× ← Part Number
↑ ↑ ↑↑ ↑
a b c d e
}
}
R×5RL
3
•
TO-92
PIN CONFIGURATION
•
SOT-89
•
SOT-23-5
PIN DESCRIPTION
• TO-92 • SOT-89 • SOT-23-5
Pin No. Symbol
1 GND
2 VIN
3 VOUT
4 NC
5 NC
Pin No. Symbol
1 GND
2 VIN
3 VOUT
Pin No. Symbol
1 GND
2 VIN
3 VOUT
(mark side)
1 2
3
(mark side)
1 2
5
4
(mark side)
1 2
3
3
R×5RL
4
ABSOLUTE MAXIMUM RATINGS
Symbol Item
VIN Input Voltage
VOUT Output Voltage
IOUT Output Current
P
D1 Power Dissipation 1 (NOTE1)
PD2 Power Dissipation 2 (NOTE2)
Topt Operating Temperature
Tstg Storage Temperature
Tsolder Lead Temperature (Soldering)
Rating Unit
+12 V
–0.3 to VIN +0.3 V
150 mA
300 mW
150 mW
– 30 to +80 ˚C
– 55 to +125 ˚C
260˚C,10s
Topt=25˚C
Absolute Maximum ratings are threshold limit values that must not be exceeded even for an instant under any
conditions. Moreover, such values for any two items must not be reached simultaneously. Operation above
these absolute maximum ratings may cause degradation or permanent damage to the device. These are stress
ratings only and do not necessarily imply functional operation below these limits.
ABSOLUTE MAXIMUM RATINGS
(NOTE 1) applied to SOT-89 and TO-92
(NOTE 2) applied to SOT-23-5
Loading...