R1171x SERIES
2.0A/1.5A LDO REGULATOR
NO. EA-125-111027
OUTLINE
The R1171x Series are CMOS-based positive voltage regulator ICs. The R1171x Series have features of low dropout voltage, high output voltage accuracy, low consumption current. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor net for setting output voltage, a current limit circuit at short mode, a chip enable circuit, and thermal shutdown circuit. The output voltage of R1171 is fixed in the IC.
Low consumption current by the merit of CMOS process and built-in transistors with low ON-resistance make low dropout voltage and chip enable function prolongs the battery life. These regulators are remarkable improvement on the current regulators in terms of input transient response, and load transient response.
Thus, the R1171x Series are suitable for various power sources.
Since the packages for these ICs are high wattage HSOP-6J package, TO-252-5-P1, high density mounting of the ICs on boards is possible.
FEATURES
• Supply Current ............................................................. |
Typ. 130μA |
|
• Standby Current ........................................................... |
Typ. 0.1μA |
|
• Output Current ............................................................. |
Min. 1.5A (VIN=VOUT+1.0V, R1171Sxx1A/B) |
|
|
|
Min. 2.0A (VIN=VOUT+1.0V, R1171Jxx1C/D) |
• |
Input Voltage ................................................................ |
2.1V to 6.0V |
• |
Output Voltage ............................................................. |
1.5V to 5.0V (0.1V steps) (R1171Sxx1A/B) |
|
|
1.8V to 5.0V (0.1V steps) (R1171Jxx1C/D) |
|
|
(For other voltages, please refer to MARK INFORMATIONS.) |
• Output Voltage Accuracy.............................................. |
± 2.0% |
|
• Dropout Voltage ........................................................... |
Typ. 0.09V (VOUT=3.0V, IOUT=300mA) |
|
• |
Temperature-drift Coefficient of Output Voltage........... |
Typ. ± 100ppm/°C |
• |
Line Regulation ............................................................ |
Typ. 0.05%/V |
• |
Packages ..................................................................... |
HSOP-6J, TO-252-5-P1 |
• |
Built-in Current Limit Circuit |
|
• |
Built-in Thermal Shutdown Circuit |
|
• Ceramic capacitor for phase compensation ................ |
CIN=COUT=Ceramic 10μF (VOUT<1.8V) |
|
|
|
CIN=COUT=Ceramic 4.7μF (VOUT => 1.8V) |
APPLICATIONS
•Local Power source for Notebook PC.
•Local Power source for portable appliances, cameras, and videos.
•Local Power source for equipment of battery-use.
•Local Power source for home appliances.
1
R1171x
BLOCK DIAGRAMS
|
R1171xxx1A/C |
|
R1171xxx1B/D |
VDD |
VOUT |
VDD |
VOUT |
|
GND |
|
GND |
|
Vref |
|
Vref |
|
Current Limit |
|
Current Limit |
CE |
Thermal Shutdown |
CE |
Thermal Shutdown |
GND |
GND |
SELECTION GUIDE
The output voltage, chip enable polarity, package for the ICs can be selected at the user’s request.
Product Name |
Package |
Quantity per Reel |
Pb Free |
Halogen Free |
R1171Sxx1 -E2-FE |
HSOP-6J |
1,000 pcs |
Yes |
Yes |
|
|
|
|
|
R1171Jyy1$-T1-F |
TO-252-5-P1 |
3,000 pcs |
Yes |
No |
|
|
|
|
|
xx: The output voltage can be designated in the range from 1.5V(15) to 5.0V(50) in 0.1V steps. (For other voltages, please refer to MARK INFORMATIONS.)
yy: The output voltage can be designated in the range from 1.8V(18) to 5.0V(50) in 0.1V steps. (For other voltages, please refer to MARK INFORMATIONS.)
: CE pin polarity are options as follows.
(A) "L" active
(B) "H" active
$ : CE pin polarity are options as follows.
(C) "L" active
(D) "H" active
2
R1171x
PIN CONFIGURATIONS
z HSOP-6J |
z TO-252-5-P1 |
6 5 4
1 2 3
1 2 3 4 5
PIN DESCRIPTIONS
• HSOP-6J
Pin No |
|
Symbol |
Pin Description |
|
1 |
|
VOUT |
Output Pin |
|
|
|
|
|
|
2 |
|
GND |
Ground Pin |
|
|
|
|
|
|
3 |
|
|
or CE |
Chip Enable Pin |
CE |
||||
4 |
|
NC |
No Connection |
|
|
|
|
|
|
5 |
|
GND |
Ground Pin |
|
|
|
|
|
|
6 |
|
VDD |
Input Pin |
|
|
|
|
|
|
• TO-252-5-P1
Pin No |
|
Symbol |
Pin Description |
|
|
|
|
|
|
1 |
|
VOUT |
Output Pin |
|
|
|
|
|
|
2 |
|
|
or CE |
Chip Enable Pin |
CE |
||||
3 |
|
GND |
Ground Pin |
|
|
|
|
|
|
4 |
|
GND |
Ground Pin |
|
|
|
|
|
|
5 |
|
VDD |
Input Pin |
|
|
|
|
|
|
) No.3 and No.4 pins must be wired short each other and connected to the GND plane when it is mounted on board.
3
R1171x
ABSOLUTE MAXIMUM RATINGS
Symbol |
|
|
Item |
Rating |
Unit |
|
VIN |
Input Voltage |
7.0 |
V |
|||
|
|
|
|
|
|
|
VCE |
Input Voltage ( |
|
or CE Input Pin) |
−0.3 to VIN+0.3 |
V |
|
CE |
||||||
VOUT |
Output Voltage |
−0.3 to VIN+0.3 |
V |
|||
PD |
Power Dissipation (HSOP-6J) 1 |
1700 |
mW |
|||
Power Dissipation (TO-252-5-P1) 1 |
1900 |
|||||
|
|
|||||
Topt |
Operating Temperature |
−40 to 85 |
°C |
|||
|
|
|
|
|||
Tstg |
Storage Temperature |
−55 to 125 |
°C |
|||
|
|
|
|
|
|
) For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the life time and safety for both device and system using the device in the field.
The functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. The semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the semiconductor devices may receive serious damage when they continue to operate over the recommended operating conditions.
4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R1171x |
||||
ELECTRICAL CHARACTERISTICS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
• R1171Sxx1A |
|
|
|
|
|
|
|
|
|
|
|
|
Topt=25°C |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Symbol |
|
|
|
|
|
|
Item |
|
|
Conditions |
Min. |
|
Typ. |
Max. |
Unit |
|
|
||||||||
|
VOUT |
|
Output Voltage |
|
|
VIN−VOUT=1.0V, IOUT=200mA |
×0.98 |
|
|
|
|
×1.02 |
V |
|
|
|||||||||||
|
VOUT/ |
|
Load Regulation |
|
|
VIN−VOUT=1.0V |
|
|
|
10 |
|
60 |
mV |
|
|
|||||||||||
|
IOUT |
|
|
|
1mA =< IOUT =< 300mA |
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.5 =< VOUT<1.6 |
|
|
|
0.16 |
0.35 |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.6 =< VOUT<1.7 |
|
|
|
0.14 |
0.32 |
|
|
|
|
|||
|
VDIF |
|
Dropout Voltage |
|
|
IOUT=300mA |
|
1.7 =< VOUT<1.8 |
|
|
|
0.13 |
0.28 |
V |
|
|
||||||||||
|
|
|
|
|
1.8 =< VOUT<2.0 |
|
|
|
0.12 |
0.24 |
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.0 =< VOUT<2.5 |
|
|
|
0.10 |
0.21 |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.5 =< VOUT =< 5.0 |
|
|
|
0.09 |
0.18 |
|
|
|
|
|||
|
ISS |
|
Supply Current |
|
|
VIN−VOUT =1.0V, VCE=0V |
|
|
|
130 |
|
320 |
μA |
|
|
|||||||||||
|
Istandby |
|
Standby Current |
|
|
VIN−VOUT=1.0V, VIN=VCE |
|
|
|
0.1 |
|
2.0 |
μA |
|
|
|||||||||||
|
VOUT/ VIN |
|
Line Regulation |
|
|
IOUT=200mA |
|
|
Refer to the following table |
|
|
|||||||||||||||
|
RR |
|
Ripple Rejection |
|
|
f=1kHz, Ripple 0.5Vp-p |
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
VIN |
|
Input Voltage |
|
|
|
|
|
|
|
2.1 |
|
|
|
|
6.0 |
V |
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
VOUT/ |
|
Output Voltage |
|
|
IOUT=10mA |
|
|
|
|
|
|
±100 |
|
ppm/°C |
|
|
|||||||||
|
Topt |
|
Temperature Coefficient |
−40°C =< Topt =< 85°C |
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
ILIM |
|
Output Current |
|
|
VIN−VOUT=1.0V |
1.5 |
|
|
|
|
|
A |
|
|
|||||||||||
|
ISC |
|
Short Current Limit |
|
|
VOUT=0V |
|
|
|
|
|
|
200 |
|
|
mA |
|
|
||||||||
|
RPU |
|
Pull-up resistance for |
|
pin |
|
|
|
|
|
2.5 |
|
|
5.0 |
|
10.0 |
MΩ |
|
|
|||||||
CE |
|
|
|
|
|
|
|
|
||||||||||||||||||
|
VCEH |
|
|
|
|
|
|
Input Voltage "H" |
|
|
|
|
|
|
|
1.2 |
|
|
|
|
VIN |
V |
|
|
||
CE |
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
VCEL |
|
|
|
|
|
|
Input Voltage "L" |
|
|
|
|
|
|
|
0 |
|
|
|
|
0.25 |
V |
|
|
||
|
CE |
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
TTSD |
|
Thermal Shutdown |
|
|
Junction Temperature |
|
|
|
150 |
|
|
°C |
|
|
|||||||||||
|
|
Detector Threshold Temperature |
|
|
|
|
|
|
|
|||||||||||||||||
|
TTSR |
|
Thermal Shutdown |
|
|
Junction Temperature |
|
|
|
120 |
|
|
°C |
|
|
|||||||||||
|
|
Released Temperature |
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
• Line Regulation by Output Voltage |
|
|
|
|
|
|
|
|
|
|
Topt=25°C |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
Output Voltage |
|
|
|
Line Regulation VOUT/ VIN (%/V) |
|
|
|
|
|
||||||||||||||||
|
|
|
VOUT (V) |
|
|
|
Condition |
|
|
|
Typ. |
|
|
Max. |
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
1.5 |
< |
VOUT < 1.6 |
|
|
|
< |
|
< |
6.0V |
|
|
|
|
|
|
|
|
|
|
|
|||||
|
= |
|
IOUT=200mA, 2.1V = VIN |
= |
|
0.05 |
|
|
|
0.30 |
|
|
|
|
||||||||||||
|
1.6 |
< |
< |
|
IOUT=200mA, VOUT+0.5V |
< |
< |
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
= |
VOUT = 5.0 |
|
= |
VIN = 6.0V |
|
|
|
|
|
|
|
|
|
|
|
||||||||||
• Ripple Rejection by Output Voltage |
|
|
|
|
|
|
|
|
|
|
Topt=25°C |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
Output Voltage |
|
|
|
Ripple Rejection |
RR (dB) |
|
|
|
|
|
|
|
|||||||||||||
|
|
|
VOUT (V) |
|
|
|
Condition |
|
|
|
|
|
Typ. |
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
1.5 |
< |
VOUT < 4.7 |
|
f=1kHz, Ripple 0.5Vp-p, VIN−VOUT=1.0V |
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
= |
|
|
|
|
|
|
50 |
|
|
|
|
||||||||||||||
|
4.7 |
< |
< |
|
f=1kHz, Ripple 0.5Vp-p, VIN=5.75V |
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
= |
VOUT = 5.0 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5
R1171x
• R1171Sxx1B |
|
|
|
|
|
|
|
|
|
Topt=25°C |
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Symbol |
|
|
Item |
|
Conditions |
Min. |
|
Typ. |
Max. |
|
Unit |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VOUT |
|
Reference Voltage for |
|
VIN−VOUT=1.0V |
|
|
×0.98 |
|
|
|
×1.02 |
|
V |
|
||||
|
|
Adjustable Voltage Regulator |
IOUT=200mA |
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
VOUT/ |
|
Load Regulation |
|
VIN−VOUT=1.0V |
|
|
|
|
10 |
|
60 |
|
mV |
|
||||
|
IOUT |
|
|
1mA =< IOUT =< 300mA |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
1.5 =< VOUT<1.6 |
|
|
0.16 |
|
0.35 |
|
|
|
|
||
|
|
|
|
|
|
|
|
1.6 =< VOUT<1.7 |
|
|
0.14 |
|
0.32 |
|
|
|
|
||
|
VDIF |
|
Dropout Voltage |
|
IOUT=300mA |
1.7 =< VOUT<1.8 |
|
|
0.13 |
|
0.28 |
|
V |
|
|||||
|
|
|
1.8 =< VOUT<2.0 |
|
|
0.12 |
|
0.24 |
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
2.0 =< VOUT<2.5 |
|
|
0.10 |
|
0.21 |
|
|
|
|
||
|
|
|
|
|
|
|
|
2.5 =< VOUT =< 5.0 |
|
|
0.09 |
|
0.18 |
|
|
|
|
||
|
ISS |
|
Supply Current |
|
VIN−VOUT=1.0V, VCE=VIN |
|
|
130 |
|
320 |
|
μA |
|
||||||
|
Istandby |
|
Standby Current |
|
VIN−VOUT=1.0V, VCE=0V |
|
|
0.1 |
|
2.0 |
|
μA |
|
||||||
|
VOUT/ VIN |
|
Line Regulation |
|
IOUT=200mA |
|
|
|
Refer to the following table |
|
|||||||||
|
RR |
|
Ripple Rejection |
|
f=1kHz, Ripple 0.5Vp-p |
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
VIN |
|
Input Voltage |
|
|
|
|
|
2.1 |
|
|
|
6.0 |
|
V |
|
|||
|
VOUT/ |
|
Output Voltage |
|
IOUT=10mA |
|
|
|
|
|
±100 |
|
|
|
ppm/°C |
|
|||
|
Topt |
|
Temperature Coefficient |
−40°C =< Topt =< 85°C |
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
ILIM |
|
Output Current |
|
VIN−VOUT=1.0V |
|
|
1.5 |
|
|
|
|
|
A |
|
||||
|
ISC |
|
Short Current Limit |
|
VOUT=0V |
|
|
|
|
|
200 |
|
|
|
mA |
|
|||
|
RPD |
|
Pull-down resistance |
|
|
|
|
|
2.5 |
|
5.0 |
|
10.0 |
|
MΩ |
|
|||
|
|
for CE pin |
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
VCEH |
|
CE Input Voltage "H" |
|
|
|
|
|
1.2 |
|
|
|
VIN |
|
V |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCEL |
|
CE Input Voltage "L" |
|
|
|
|
|
0 |
|
|
|
0.25 |
|
V |
|
|||
|
TTSD |
|
Thermal Shutdown |
|
Junction Temperature |
|
|
150 |
|
|
|
°C |
|
||||||
|
|
Detector Threshold Temperature |
|
|
|
|
|
|
|||||||||||
|
TTSR |
|
Thermal Shutdown |
|
Junction Temperature |
|
|
120 |
|
|
|
°C |
|
||||||
|
|
Released Temperature |
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
• Line Regulation by Output Voltage |
|
|
|
|
|
|
|
|
Topt=25°C |
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
Output Voltage |
|
|
Line Regulation VOUT/ VIN (%/V) |
|
|
|
|
|
||||||||||
|
|
|
VOUT (V) |
|
|
Condition |
|
|
Typ. |
|
|
Max. |
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
< |
VOUT < 1.6 |
|
|
< |
< |
6.0V |
|
|
|
|
|
|
|
|
|
|
|
1.5 = |
|
IOUT=200mA, 2.1V = VIN |
= |
|
0.05 |
|
|
0.30 |
|
|
|
|||||||
|
1.6 |
< |
< |
|
IOUT=200mA, VOUT+0.5V |
< |
< |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
= |
VOUT = 5.0 |
|
= |
VIN = 6.0V |
|
|
|
|
|
|
|
|
|
|
||||
• Ripple Rejection by Output Voltage |
|
|
|
|
|
|
|
|
Topt=25°C |
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
Output Voltage |
|
|
Ripple Rejection |
RR (dB) |
|
|
|
|
|
|
|
|||||||
|
|
|
VOUT (V) |
|
|
Condition |
|
|
|
|
Typ. |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
< |
VOUT < 4.7 |
|
f=1kHz, Ripple 0.5Vp-p, VIN−VOUT=1.0V |
|
|
|
|
|
|
|
|
|
||||
|
1.5 = |
|
|
|
|
|
50 |
|
|
|
|
||||||||
|
4.7 |
< |
< |
|
f=1kHz, Ripple 0.5Vp-p, VIN=5.75V |
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
= |
VOUT = 5.0 |
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
R1171x |
||
• R1171Jxx1C |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topt=25°C |
||
|
Symbol |
|
|
|
|
|
Item |
|
|
|
Conditions |
|
Min. |
|
|
Typ. |
Max. |
Unit |
|
||
|
VOUT |
|
Output Voltage |
|
|
|
VIN−VOUT=1.0V |
|
×0.98 |
|
|
|
×1.02 |
V |
|
||||||
|
|
|
|
|
IOUT=200mA |
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
VOUT/ |
|
Load Regulation |
|
|
|
VIN−VOUT=1.0V |
|
|
|
|
10 |
60 |
mV |
|
||||||
|
IOUT |
|
|
|
|
1mA =< IOUT =< 300mA |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
1.8 =< VOUT<2.0 |
|
|
|
|
0.12 |
0.24 |
|
|
|
|
VDIF |
|
Dropout Voltage |
|
|
|
IOUT=300mA |
2.0 =< VOUT<2.5 |
|
|
|
|
0.10 |
0.21 |
V |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
2.5 =< VOUT =< 5.0 |
|
|
|
|
0.09 |
0.18 |
|
|
|
|
ISS |
|
Supply Current |
|
|
|
VIN−VOUT=1.0V, VCE=0V |
|
|
|
|
130 |
320 |
μA |
|
||||||
|
Istandby |
|
Standby Current |
|
|
|
VIN−VOUT =1.0V, VIN=VCE |
|
|
|
|
0.1 |
2.0 |
μA |
|
||||||
|
VOUT/ |
|
Line Regulation |
|
|
|
IOUT=200mA |
|
|
|
|
0.05 |
0.30 |
%/V |
|
||||||
|
VIN |
|
|
|
|
VOUT+0.5V =< VIN =< 6V |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
RR |
|
Ripple Rejection |
|
|
|
f=1kHz, Ripple 0.5Vp-p |
|
Refer to the following table |
|
|||||||||||
|
VIN |
|
Input Voltage |
|
|
|
|
|
|
2.1 |
|
|
|
6.0 |
V |
|
|||||
|
VOUT/ |
|
Output Voltage |
|
|
|
IOUT=10mA |
|
|
|
|
±100 |
|
ppm/°C |
|
||||||
|
Topt |
|
Temperature Coefficient |
|
−40°C =< Topt =< 85°C |
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
ILIM |
|
Output Current |
|
|
|
VIN−VOUT=1.0V |
|
2.0 |
|
|
|
|
A |
|
||||||
|
ISC |
|
Short Current Limit |
|
|
|
VOUT=0V |
|
|
|
|
200 |
|
mA |
|
||||||
|
RPU |
|
Pull-up resistance for |
|
pin |
|
|
|
|
2.5 |
|
|
5.0 |
10.0 |
MΩ |
|
|||||
CE |
|
|
|
|
|
|
|
||||||||||||||
|
VCEH |
|
|
|
|
|
Input Voltage "H" |
|
|
|
|
|
|
1.2 |
|
|
|
VIN |
V |
|
|
CE |
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
VCEL |
|
|
|
|
|
Input Voltage "L" |
|
|
|
|
|
|
0 |
|
|
|
0.25 |
V |
|
|
CE |
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
Thermal Shutdown |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
TTSD |
|
Detector Threshold |
|
|
|
Junction Temperature |
|
|
|
|
150 |
|
°C |
|
||||||
|
|
|
Temperature |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
TTSR |
|
Thermal Shutdown |
|
|
|
Junction Temperature |
|
|
|
|
120 |
|
°C |
|
||||||
|
|
Released Temperature |
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
• Ripple Rejection by Output Voltage |
|
|
|
|
|
|
|
Topt=25°C |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
Output Voltage |
|
|
|
|
Ripple Rejection |
RR (dB) |
|
|
|
|
|
|||||||||
|
|
|
|
VOUT (V) |
|
|
|
Condition |
|
|
|
|
Typ. |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
< |
VOUT < 4.7 |
f=1kHz, Ripple 0.5Vp-p, VIN−VOUT=1.0V |
|
|
|
|
|
|
|
|
||||||||
|
1.8 = |
|
|
|
|
50 |
|
|
|
||||||||||||
|
4.7 |
< |
< |
f=1kHz, Ripple 0.5Vp-p, VIN=5.75V |
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|||||||||||||
|
= |
VOUT = 5.0 |
|
|
|
|
|
|
|
|
7
R1171x
• R1171Jxx1D
|
|
|
|
|
|
|
Topt=25°C |
|
Symbol |
Item |
Conditions |
Min. |
Typ. |
Max. |
|
Unit |
|
VOUT |
Reference Voltage for |
VIN−VOUT=1.0V |
×0.98 |
|
×1.02 |
|
V |
|
Adjustable Voltage Regulator |
IOUT=200mA |
|
|
|||||
|
|
|
|
|
|
|||
VOUT/ |
Load Regulation |
VIN−VOUT=1.0V |
|
10 |
60 |
|
mV |
|
IOUT |
1mA =< IOUT =< 300mA |
|
|
|||||
|
|
|
|
|
|
|||
|
|
|
1.8 =< VOUT<2.0 |
|
0.12 |
0.24 |
|
|
VDIF |
Dropout Voltage |
IOUT=300mA |
2.0 =< VOUT<2.5 |
|
0.10 |
0.21 |
|
V |
|
|
|
2.5 =< VOUT =< 5.0 |
|
0.09 |
0.18 |
|
|
ISS |
Supply Current |
VIN−VOUT=1.0V, VCE=VIN |
|
130 |
320 |
|
μA |
|
Istandby |
Standby Current |
VIN−VOUT=1.0V, VCE=0V |
|
0.1 |
2.0 |
|
μA |
|
VOUT/ |
Line Regulation |
IOUT=200mA |
|
0.05 |
0.30 |
|
%/V |
|
VIN |
VOUT+0.5V =< VIN =< 6V |
|
|
|||||
|
|
|
|
|
|
|||
RR |
Ripple Rejection |
f=1kHz, Ripple 0.5Vp-p |
Refer to the following table |
|||||
VIN |
Input Voltage |
|
|
2.1 |
|
6.0 |
|
V |
VOUT/ |
Output Voltage |
IOUT=10mA |
|
±100 |
|
|
ppm/°C |
|
Topt |
Temperature Coefficient |
−40°C =< Topt =< 85°C |
|
|
|
|||
|
|
|
|
|
||||
ILIM |
Output Current |
VIN−VOUT=1.0V |
2.0 |
|
|
|
A |
|
ISC |
Short Current Limit |
VOUT=0V |
|
200 |
|
|
mA |
|
RPD |
Pull-down resistance |
|
|
2.5 |
5.0 |
10.0 |
|
MΩ |
for CE pin |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
VCEH |
CE Input Voltage "H" |
|
|
1.2 |
|
VIN |
|
V |
|
|
|
|
|
|
|
|
|
VCEL |
CE Input Voltage "L" |
|
|
0 |
|
0.25 |
|
V |
|
|
|
|
|
|
|
|
|
TTSD |
Thermal Shutdown |
Junction Temperature |
|
150 |
|
|
|
|
Detector Threshold |
|
|
|
°C |
||||
|
Temperature |
|
|
|
|
|
|
|
TTSR |
Thermal Shutdown |
Junction Temperature |
|
120 |
|
|
°C |
|
Released Temperature |
|
|
|
|||||
|
|
|
|
|
|
|
|
• Ripple Rejection by Output Voltage |
|
Topt=25°C |
||
|
|
|
|
|
|
Output Voltage |
Ripple Rejection |
RR (dB) |
|
|
VOUT (V) |
Condition |
|
Typ. |
|
|
|
||
|
1.8 =< VOUT < 4.7 |
f=1kHz, Ripple 0.5Vp-p, VIN−VOUT=1.0V |
|
50 |
|
4.7 =< VOUT =< 5.0 |
f=1kHz, Ripple 0.5Vp-p, VIN=5.75V |
|
|
|
|
|
8