Ricoh PRSPC252DN1 User Manual

Safety

Information

English

1.Information

2.Safety During Operation

3.Safety Labels of This Machine

4.Laws and Regulations

5.Important Safety Instructions

For information not in this manual, refer to the PDF files on the supplied CD-ROM.

Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in This manual before using the machine.

English

Information

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.

Power Source

120-127 V, 11 A, 60 Hz

Be sure to connect the power cord to a power source as above.

1

Safety During Operation

In this manual, the following important symbols are used:

R WARNING:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

R CAUTION:

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

Environments Where the Machine Can be Used

RWARNING:

•Do not use flammable sprays or solvents in the vicinity of this machine. Doing so could result in fire or electric shock.

•Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine.

R CAUTION:

•Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

•Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

•Do not place heavy objects on the machine. Doing so can cause the machine to topple over, possibly resulting in injury.

•Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily.

•Keep the machine in an area that is within optimum environmental conditions. Operating the machine in an environment that is outside the recommended ranges of humidity and temperature can cause an electrical fire hazard. Keep the area around the socket free of dust. Accumulated dust can become an electrical fire hazard.

2

•Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Handling Power Cords and Power Plugs

RWARNING:

•Touching the prongs of the power cable's plug with anything metallic constitutes a fire and electric shock hazard.

•Do not use any frequencies other than those that match the specifications shown. Doing so could result in fire or electric shock.

•Do not use any power sources other than those that match the specifications shown in this manual. Doing so could result in fire or electric shock.

•Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

•Do not use extension cords. Doing so could result in fire or electric shock.

•Do not use power cords that are damaged, broken, or modified. Also, do not use power cords that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could result in fire or electric shock.

•It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric shock.

•If the power cord is damaged and its inner wires are exposed or broken, contact your service representative for a replacement. Use of damaged power cords could result in fire or electric shock.

•Be sure to disconnect the power cord from the wall outlet at least once a year and check for the following:

•The power cord's inner wires are exposed, broken, etc.

•The power cord's coating has a crack or dent.

•When bending the power cord, the power turns off and on.

•Part of the power cord becomes hot.

•The power cord is damaged.

•If any of the above conditions exist, do not use the power cord and consult your dealer or service representative. Use of the power cord could result in fire or electric shock.

3

•Be sure to disconnect the plug from the wall outlet at least once a year and check for the following:

•There are burn marks on the plug.

•The prongs on the plug are deformed.

•If any of the above conditions exist, do not use the plug and consult your dealer or service representative. Use of the plug could result in fire or electric shock.

•The supplied power cord is for use with this machine only. Do not use it with other appliances. Doing so could result in fire or electric shock.

R CAUTION:

•Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

•Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs create an unstable connection that can result in unsafe buildup of heat.

•If this machine is not going to be used for several days or longer at a time, disconnect its power cord from the wall outlet.

•When disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock.

•When performing maintenance on the machine, always disconnect the power cord from the wall outlet.

•To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.

4

Handling the Machine

RWARNING:

•Be sure to locate the machine as close as possible to a wall outlet. This will allow easy disconnection of the power cord in the event of an emergency.

•If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock.

•If metal objects, or water or other fluids fall inside this machine, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock.

•Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could result in electric shock

•The following explains the warning messages on the plastic bag used in this product's packaging.

•Keep the polythene materials (bags, etc.) supplied with this machine away from babies and small children at all times. Suffocation can result if polythene materials are brought into contact with the mouth or nose.

R CAUTION:

•When moving the machine, use the inset grips on both sides, and lift it up slowly. The machine may break or cause injury if dropped.

•Be careful not to trap your fingers when opening or closing the cover.

•Unplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.

•Do not look into the lamp. It can damage your eyes.

5