Ricoh PJ X5360N Owner's Manual
User’s Manual
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the
Important Information in this manual before using the machine.
• Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc. registered in the U.S. and other countries.
• Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered
trademark or trademark of Microsoft Corporation in the United States and/or other countries.
• MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands.
• HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
• Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other
countries and areas.
®
• Wi-Fi
, Wi-Fi Alliance®, and Wi-Fi Protected Access (WPA, WPA2)® are registered trademarks of the Wi-Fi Alliance.
• Blu-ray is a trademark of Blu-ray Disc Association
• Crestron, Crestron Control, and Crestron RoomView are trademarks or registered trademarks of Crestron Electronics, Inc.
• Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks
of their respective holders.
• GPL/LGPL Software Licenses
The product includes software licensed under GNU General Public License (GPL), GNU Lesser General Public
License (LGPL), and others.
For more information on each software, see “readme.pdf” inside the “about GPL&LGPL” folder on the supplied Source
Code CD-ROM.
NOTES
(1) The contents of this user’s manual may not be reprinted in part or whole without permission.
(2) The contents of this user’s manual are subject to change without notice.
(3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable
points, errors or omissions, please contact us.
(4) Notwithstanding article (3), Ricoh will not be responsible for any claims on loss of prot or other matters deemed
to result from using the Projector.
Important Information
Safety Cautions
Precautions
Please read this manual carefully before using your Ricoh projector and keep the manual handy for future reference.
CAUTION
To turn off main power, be sure to remove the plug from power outlet.
The power outlet socket should be installed as near to the equipment as possible, and should be easily
accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical
shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.
This symbol alerts the user that important information concerning the operation and maintenance of this
unit has been provided.
The information should be read carefully to avoid problems.
WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGS
CAN BE FULLY INSERTED.
DOC Compliance Notice (for Canada only)
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.
CAUTION
Avoid displaying stationary images for a prolonged period of time.
Doing so can result in these images being temporarily sustained on the surface of the LCD panel.
If this should happen, continue to use your projector. The static background from previous images will
disappear.
User Information on Electrical and Electronic Equipment
Users in the countries where this symbol shown in this section has been specified in national law
on collection and treatment of E-waste
Our Products contain high quality components and are designed to facilitate recycling.
Our products or product packaging are marked with the symbol below.
i
Important Information
The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via
the appropriate return and collection systems available. By following these instructions you ensure that this product is
treated correctly and help to reduce potential impacts on the environment and human health, which could otherwise result
from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment.
For more detailed information on collection and recycling systems for this product, please contact the shop where you
purchased it, your local dealer or sales/service representatives.
All Other Users
If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your
local dealer or sales/service representatives.
Note for the Battery and/or Accumulator Symbol (For EU countries only)
In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II, the above symbol
is printed on batteries and accumulators.
This symbol means that in the European Union, used batteries and accumulators should be disposed of separately
from your household waste.
In the EU, there are separate collection systems for not only used electrical and electronic products but also batteries
and accumulators.
Please dispose of them correctly at your local community waste collection/recycling centre.
WARNING TO CALIFORNIA RESIDENTS:
Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California
to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.
RF Interference (for USA only)
WARNING
The Federal Communications Commission does not allow any modications or changes to the unit EXCEPT those
specied by Ricoh Americas Corporation in this manual. Failure to comply with this government regulation could void
your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
For UK only: In UK, a BS approved power cord with moulded plug has a Black (ve Amps) fuse installed for use with
this equipment. If a power cord is not supplied with this equipment please contact your supplier.
ii
Important Information
Important Safeguards
These safety instructions are to ensure the long life of your projector and to prevent re and shock. Please read them
carefully and heed all warnings.
Installation
• Do not place the projector in the following conditions:
- on an unstable cart, stand, or table.
- near water, baths, or damp rooms.
- in direct sunlight, near heaters, or heat radiating appliances.
- in a dusty, smoky or steamy environment.
- on a sheet of paper or cloth, rugs or carpets.
• If you wish to have the projector installed on the ceiling:
- Do not attempt to install the projector yourself.
- The projector must be installed by qualied technicians in order to ensure proper operation and reduce the risk
of bodily injury.
- In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes.
- Please consult your dealer for more information.
WARNING
• Do not use any other object than the projector’s sliding lens cover to cover the lens while the projector is on.
Doing so can cause the object to get extremely hot, and possibly resulting in a re or damage due to the heat
emitted from the light output.
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other
than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.
10°
iii
Important Information
Fire and Shock Precautions
• Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your
projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
• Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while
the projector is turned on and immediately after the projector is turned off. Parts of the projector may become temporarily heated if the projector is turned off with the Power button or if the AC power supply is disconnected during
normal projector operation.
Use caution when picking up the projector.
• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve
any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your
projector. If something should fall into your projector, disconnect it immediately and have the object removed by a
qualied service personnel.
• Do not place any objects on top of the projector.
• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or re.
• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply
ts this requirement before attempting to use your projector.
• Do not look into the lens while the projector is on. Serious damage to your eyes could result.
• Keep any items (magnifying glass etc.) out of the light path of the projector. The light path being projected from the
lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause
an unpredictable outcome such as a re or injury to the eyes.
• Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent.
Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the exhaust.
• Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or re.
- Do not use any power cord other than the one supplied with the projector.
- Do not bend or tug the power cord excessively.
- Do not place the power cord under the projector, or any heavy object.
- Do not cover the power cord with other soft materials such as rugs.
- Do not heat the power cord.
- Do not handle the power plug with wet hands.
• Turn off the projector, unplug the power cord and have the projector serviced by a qualied service personnel under
the following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the projector, or if it has been exposed to rain or water.
- If the projector does not operate normally when you follow the instructions described in this user’s manual.
- If the projector has been dropped or the cabinet has been damaged.
- If the projector exhibits a distinct change in performance, indicating a need for service.
• Disconnect the power cord and any other cables before carrying the projector.
• Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.
• Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.
• When using a LAN cable (only models with the RJ-45 LAN port):
For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.
iv
Important Information
CAUTION
• Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.
• Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the
soft case could be damaged.
• Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select
[SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].)
• Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while
the projector is turned on and immediately after the projector is turned off.
• Do not turn off the AC power for 60 seconds after the lamp is turned on and while the Power indicator is blinking
blue. Doing so could cause premature lamp failure.
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not short, heat, or take apart batteries.
• Do not throw batteries into re.
• If you will not be using the remote control for a long time, remove the batteries.
• Ensure that you have the batteries’ polarity (+/−) aligned correctly.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
Note for US Residents
The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws.
Lamp Replacement
• Use the specied lamp for safety and performance.
• To replace the lamp, follow all instructions provided on page 146.
• Be sure to replace the lamp and lter when the message [THE LAMP HAS REACHED THE END OF ITS USABLE
LIFE. PLEASE REPLACE THE LAMP AND FILTER.] appears. If you continue to use the lamp after the lamp has
reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp
case. Do not touch them as the pieces of glass may cause injury.
If this happens, contact your dealer for lamp replacement.
A Lamp Characteristic
The projector has a high-pressure mercury lamp as a light source.
A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on
and off will increase the possibility of its lower brightness.
CAUTION:
• DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off
and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.
• When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass
fragments could fall if the lamp has been burned out.
v
Important Information
About High Altitude mode
•
Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or
higher.
Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE]
can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and
turn on the projector.
• Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE]
can cause the lamp to overcool, causing the image to icker. Switch [FAN MODE] to [AUTO].
• Using the projector at altitudes approximately 5500 feet/1600 meters or higher can shorten the life of optical components such as the lamp.
About Copyright of original projected pictures:
Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue
such as a coffee shop or hotel and employing compression or expansion of the screen image with the following functions may raise concern about the infringement of copyrights which are protected by copyright law.
[ASPECT], [KEYSTONE], Magnifying feature and other similar features.
Turkish RoHS information relevant for Turkish market
EEE Yonetmeliğine Uygundur.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid incommoding reections at visual display workplaces this device must not be placed in the direct eld of view.
• FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this
device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B Personal Computer and Peripheral,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been tested to comply with the limits for a Class B personal computer and periph-eral, pursuant
to Subpart B of Part 15 of FCC Rules. Only peripherals (computer input/output devices, terminals, printers, etc.) certied (DoC) or veried to comply with Class B limits may be attached to this equipment. Operation with non-certied
(DoC) or non-veried personal computer and/or peripherals is likely to result in Interference to radio and TV reception.
The connection of a unshielded equipment interface cable to this equipment will invalidate the FCC Certication of this
device and may cause interference levels which Exceed the limits established by FCC for equipment.
You are cautioned that changes or modications not expressly approved by the party responsible for compliance could
void your authority to operate the equipment.
vi
Important Information
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the
user documentation provided with the product. Any changes or modications (including the antennas) made to this
device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
The manufacturer is not responsible for any radio or television interference caused by unauthorized modication of
this device, or the substitution of the connecting cables and equipment other than manufacturer specied. It is the
responsibility of the user to correct any interference caused by such unauthorized modication, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of
government regulations arising from failing to comply with these guidelines.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is rmware-limited to channels 1 through 11.
CAUTION
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed
to provide a separation distance of at least 7.87"/20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
This Class B digital apparatus complies with Canadian RSS-210.
Cet appareil numerique de la Classe B est conforme a la norme CNR-210 du Canada.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of the device
Regulatory Statement:
Operation of this device is subjected to the following National regulations and may be prohibited to use if certain
restriction should be applied.
France:
Outdoor use limited to 10mW e.i.r.p. within the band 2454 – 2483.5 MHz. Derogation in French overseas departments
of Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz.
vii
Important Information
Safety Labels of This Machine
1 Do not look into the lens while the projector is on. Serious damage to your eyes could result. Do not use any other
object than the projector's sliding lens cover to cover the lens while the projector is on. Doing so can cause the
object to get extremely hot, and possibly resulting in a re or damage due to the heat emitted from the light output.
2 Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projec-
tor is turned on and immediately after the projector is turned off. Parts of the projector may become temporarily heated if the
projector is turned off with the Power button or if the AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
3 Do not remove any screws except the lamp cover screws. Do not block or cover the vents.
4 To replace the lamp, rst unplug the power cord then wait for more than 1 hour. The lamp might be broken. Be
careful of pieces of broken glass.
3
1
2
4
viii
Table of Contents
Important Information ............................................................................................i
1. Introduction .......................................................................................................... 1
1 What’s in the Box? ......................................................................................................... 1
2 Introduction to the Projector ........................................................................................... 2
Congratulations on Your Purchase of the Projector .................................................. 2
Features you’ll enjoy: ................................................................................................ 2
About this user’s manual .......................................................................................... 3
3 Part Names of the Projector .......................................................................................... 4
Front/Top .................................................................................................................. 4
Rear ......................................................................................................................... 5
Top Features ............................................................................................................ 6
Terminal Panel Features .......................................................................................... 7
4 Part Names of the Remote Control ................................................................................ 8
Battery Installation ................................................................................................... 9
Remote Control Precautions .................................................................................... 9
Operating Range for Wireless Remote Control ........................................................ 9
5 Operating Environment for Software Included on CD-ROM .........................................10
Operating Environment ...........................................................................................11
2. Projecting an Image (Basic Operation) ...............................................12
1 Flow of Projecting an Image .........................................................................................12
2 Connecting Your Computer/Connecting the Power Cord ..............................................13
3 Turning on the Projector ................................................................................................14
Note on Startup screen (Menu Language Select screen) .......................................15
4 Selecting a Source .......................................................................................................16
Selecting the computer or video source ..................................................................16
5 Adjusting the Picture Size and Position ........................................................................17
Adjusting the vertical position of a projected image (Lens shift) .............................18
Focus ......................................................................................................................19
Zoom ...................................................................................................................... 20
Adjust the Tilt Foot ................................................................................................. 21
6 Correcting Keystone Distortion Manually ..................................................................... 22
Adjusting with buttons on the cabinet ..................................................................... 22
Adjusting with the remote control ........................................................................... 23
7 Optimizing Computer Signal Automatically .................................................................. 24
Adjusting the Image Using Auto Adjust .................................................................. 24
8 Turning Up or Down Volume ........................................................................................ 24
9 Turning off the Projector ............................................................................................... 25
After Use ...................................................................................................................... 26
3. Convenient Features ..................................................................................... 27
1 Turning off the Image and Sound ................................................................................. 27
2 Freezing a Picture ........................................................................................................ 27
3 Enlarging a Picture ...................................................................................................... 27
4 Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode
[LAMP POWER] ..................................................................................................... 28
ix
Table of Contents
Checking Energy-Saving Effect [CARBON METER] .............................................. 29
5 Preventing the Unauthorized Use of the Projector [SECURITY] ......................................30
6 Using the Remote Mouse Receiver ............................................................................. 33
7 Operating Your Computer’s Mouse Functions from the Projector’s Remote Control
via the USB Cable (Remote Mouse Function) ....................................................... 35
8 Projecting Your Computer’s Screen Image from the Projector via the USB Cable
(USB Display) ........................................................................................................ 36
9 Controlling the Projector by Using an HTTP Browser .................................................. 38
Projecting Your Computer’s Screen Image from the Projector
via a Network [NETWORK PROJECTOR] ............................................................. 45
Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP]
... 49
4. Using the Viewer ............................................................................................. 54
1 What you can do with the Viewer ................................................................................. 54
2 Preparing presentation materials ................................................................................. 57
3 Projecting images stored in a USB memory device ..................................................... 58
Starting the Viewer ................................................................................................. 58
Exiting the Viewer .................................................................................................. 60
Names and functions of Viewer screen .................................................................. 61
Viewer option settings ............................................................................................ 66
4 Projecting data from shared folder ............................................................................... 69
Connecting the projector to the shared folder ....................................................... 69
Disconnecting the shared folder from the projector................................................ 72
5 Projecting data from media server ............................................................................... 73
Setting up “Media Sharing” in Windows Media Player 11 ....................................... 73
Setting up “Media Sharing” in Windows Media Player 12 ....................................... 75
Connecting the projector to the media server .........................................................76
Disconnecting the projector from the media server ................................................ 77
5. Using On-Screen Menu ................................................................................ 78
1 Using the Menus .......................................................................................................... 78
2 Menu Elements ............................................................................................................ 79
3 List of Menu Items ....................................................................................................... 80
4 Menu Descriptions & Functions [INPUT] ..................................................................... 82
COMPUTER1 and 2 .............................................................................................. 82
HDMI ...................................................................................................................... 82
VIDEO .................................................................................................................... 82
S-VIDEO ................................................................................................................ 82
VIEWER ................................................................................................................. 82
NETWORK ............................................................................................................. 82
USB DISPLAY ........................................................................................................ 82
5 Menu Descriptions & Functions [ADJUST] .................................................................. 83
[PICTURE] ............................................................................................................. 83
[IMAGE OPTIONS] ................................................................................................ 86
[AUDIO] .................................................................................................................. 90
6 Menu Descriptions & Functions [SETUP] .................................................................... 91
[GENERAL] ............................................................................................................ 91
[MENU] .................................................................................................................. 93
x
Table of Contents
[INSTALLATION] .................................................................................................... 95
[OPTIONS(1)] ........................................................................................................ 97
[OPTIONS(2)] ........................................................................................................ 99
7 Menu Descriptions & Functions [INFO.] .....................................................................101
[USAGE TIME] ...................................................................................................... 101
[SOURCE].............................................................................................................102
[WIRED LAN] ........................................................................................................102
[WIRELESS LAN] .................................................................................................102
[VERSION(1)] .......................................................................................................103
[VERSION(2)] .......................................................................................................103
[OTHERS] .............................................................................................................103
8 Menu Descriptions & Functions [RESET] ...................................................................104
Returning to Factory Default [RESET] ..................................................................104
9 Application Menu ........................................................................................................105
ADVANCED NETWORK / PROJECTION UTILITY ...............................................105
NETWORK PROJECTOR .....................................................................................106
REMOTE DESKTOP CONNECTION ...................................................................106
NETWORK SETTINGS .........................................................................................107
TOOLS ..................................................................................................................123
6. Installation and Connections ..................................................................128
1 Setting Up the Screen and the Projector ....................................................................128
Selecting a Location..............................................................................................128
Throw Distance and Screen Size ..........................................................................130
2 Making Connections ...................................................................................................132
Connecting Your Computer ...................................................................................132
Connecting an External Monitor ............................................................................134
Connecting Your DVD Player or Other AV Equipment ...........................................135
Connecting Component Input ...............................................................................136
Connecting HDMI Input .........................................................................................137
Connecting to a Wired LAN ...................................................................................138
Connecting to a Wireless LAN (sold separately) ...................................................139
Mounting a wireless LAN unit ...............................................................................140
7. Maintenance .....................................................................................................142
1 Cleaning the Filters .....................................................................................................142
2 Cleaning the Lens.......................................................................................................145
3 Cleaning the Cabinet ..................................................................................................145
4 Replacing the Lamp and the Filters ............................................................................146
8. User Supportware ..........................................................................................151
1 Installing Software Program ........................................................................................151
Installation for Windows software ..........................................................................151
Installation for Macintosh software ........................................................................153
2 Projecting Your Computer’s Screen Image from the Projector over a LAN
(Projection Utility) ..................................................................................................154
3 Projecting an Image from an Angle (Geometric Correction Tool in Projection Utility) .157
What you can do with GCT ...................................................................................157
Projecting an Image from an Angle (GCT) ............................................................157
xi
Table of Contents
4 Projecting Images or Videos from the Projector over a LAN
(Advanced Network Utility) ...................................................................................159
What you can do with Advanced Network Utility ...................................................159
Connecting the projector to a LAN ........................................................................160
Basic Operation of Advanced Network Utility .......................................................161
5 Projecting Your Mac’s Screen Image from the Projector over a LAN
(Advanced Network Utility for Mac) .......................................................................165
What you can do with Advanced Network Utility ...................................................165
Operating environment..........................................................................................165
Connecting the projector to a LAN ........................................................................165
Using Advanced Network Utility ............................................................................166
6 JPEG Conversion Tool ................................................................................................168
Installing JPEG Conversion Tool ...........................................................................168
7 Managing the Projector Using Projector Management Utility ......................................169
Operating environment..........................................................................................169
Installing Projector Management Utility .................................................................169
9. Appendix ..............................................................................................................170
1 Troubleshooting ..........................................................................................................170
Indicator Messages ...............................................................................................170
Common Problems & Solutions ............................................................................171
If there is no picture, or the picture is not displayed correctly. ...............................172
2 Specications .............................................................................................................173
3 Cabinet Dimensions ...................................................................................................175
4 Pin Assignments of D-Sub Computer Input Connector ...............................................176
5 Compatible Input Signal List .......................................................................................177
6 PC Control Codes and Cable Connection ..................................................................178
xii
1. Introduction
1 What’s in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your projector.
NOTE: The bundled items may vary depending on the product destination.
Projector
Remote control Batteries (AAA × 2)
Remote mouse receiver
• Important Infomation
• Quick Setup Guide
Power cord Computer cable (VGA)
(Y156079)
CD-ROM (× 2)
User’s manual (PDF), the utility
software and the source code
Unless otherwise described in the user’s manual, the drawings for the projector cabinet show examples of the PJ X5360N.
1
1. Introduction
2 Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.
Congratulations on Your Purchase of the Projector
This projector is one of the very best projectors available today. The projector enables you to project precise images
up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR,
DVD player, or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*1. The remote control can be used wirelessly.
1
*
Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualied technicians in order to ensure proper operation and reduce the risk
of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes. Please consult your dealer for more information.
Features you’ll enjoy:
• Quick start (3 seconds*1), Quick Power Off (0 seconds), Direct Power Off
3 seconds*
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when
projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
*1 The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message.
• 0.2 W (100-130 V AC)/0.4 W (200-240 V AC) in standby condition with energy saving technology
Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode
that consumes only 0.2 W (100-130 V AC)/0.4 W (200-240 V AC).
• Carbon Meter
This feature will show energy-saving effect in terms of CO
POWER] is set to [AUTO ECO] or [ECO1].
The amount of CO
in the INFO of the on-screen menu.
• Lamp life up to 3500 hours without cleaning the lters regularly
Using in Eco Mode allows you to prolong the projector’s lamp life up to 3500 hours (up to 3000 hours in NORMAL
Mode (ECO Mode OFF))
The two-layer, large lters require no regular cleaning. Filter replacement is requred only when lamp replacement
is done.
• Vertical lens shift mechanism offers installation exibility
Manual lens shift that can be adjusted by turning dials on the top of the projector.
• HDMI input port provides digital signal
The HDMI input provides HDCP compatible digital signals. The HDMI input also supports audio signal.
• 10 W built-in speaker for an integrated audio solution
Powerful 10 watt monaural speaker provides volume need for large rooms.
1
after turning on the power, the projector is ready to display PC or video images.
emission reduction (kg) when the projector’s [LAMP
2
emission reduction will be displayed in the conrmation message at the time of power-off and
2
2
1. Introduction
• The supplied remote control allows you to assign a CONTROL ID to the projector
Multiple projectors can be operated separately and independently with the same single remote control by assigning
an ID number to each projector.
• Vertical keystone correction
Keystone feature allows the projector to correct vertical distortion.
• USB Display
Using a commercially available USB cable (compatible with USB 2.0 specications) to connect the computer with
the projector allows you to send your computer screen image to the projector without the need of a traditional
computer cable (VGA).
• Wired/wireless LAN compatibility (wireless LAN unit sold separately)
The projector is equipped with a LAN port (RJ-45) for connection to a wired LAN for transferring images from a
computer to the projector, controlling the projector from a computer, etc.
Furthermore, the projector can be used in a wireless LAN by mounting the separately sold wireless LAN unit
(NP02LM).
• Software programs (User Supportware) contained in the supplied CD-ROM
The supplied Ricoh Projector includes programs: Projection Utility, Advanced Network Utility, Advanced Network
Utility for Mac, JPEG Conversion Tool, and Projector Management Utility.
• LAN-compatible Viewer
The projector’s built-in Viewer allows you to view images or movie les in the shared folder of your PC connected
to a wired or wireless LAN.
* The Viewer supports the Media Sharing function of Windows Media Player 11.
• AUTO POWER ON and POWER OFF ON NO SIGNAL features
The POWER ON METHOD, AUTO POWER ON(COMP1), POWER OFF ON NO SIGNAL, and OFF TIMER features
eliminate the need to always use the Power button on the remote control or projector cabinet.
• Preventing unauthorized use of the projector
Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security
chain opening to help prevent unauthorized access, adjustments and theft deterrence.
• High resolution up to UXGA
High resolution display - up to UXGA compatible, XGA (PJ X5360N)/WXGA (PJ WX5350N) native resolution.
• Crestron RoomView
The projector suppors Crestron RoomView which allows you to control and manage equipment connected to your
network from your computer.
®
supported
About this user’s manual
The fastest way to get started is to take your time and do everything right the rst time. Take a few minutes now to
review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll nd
an overview. If the section doesn’t apply, you can skip it.
3
3 Part Names of the Projector
Front/Top
1. Introduction
Zoom Lever
Heated air is exhausted from here.
Adjustable Tilt Foot Lever
(→ page 20)
Focus Lever
(→ page 19)
Ventilation (outlet)
Lens Cover
(→ page 21)
Adjustable Tilt Foot
(→ page 21)
Controls
(→ page 6)
Lens Shift Dial (Vertical)
(→ page 18)
Ventilation (inlet) / Filter Cover
(→ page 142, 149)
Remote Sensor
(→ page 9)
Lens
4
Rear
1. Introduction
USB Wireless LAN Unit
Port Cover for
When using the USB Wireless LAN
Unit, rst remove the cover.
(→ page 140)
Monaural Speaker (10 W)
Terminal Panel (→ page 7)
AC Input
Connect the supplied power cord’s
three-pin plug here, and plug the
other end into an active wall outlet.
(→ page 13)
* This security slot supports the MicroSaver ® Security System.
Opening and closing the lens cover
Slide the lens cover to the left to uncover the lens.
Remote Sensor
(→ page 9)
Lamp Cover (→ page 147)
Built-in Security Slot (
Security chain opening
Attach an anti-theft device.
The security chain opening accepts security wires or chains up to
0.18 inch/4.6 mm in diameter.
Rear Foot (→ page 21)
)*
To cover the lens, slide the lens cover to the right.
NOTE:
• The lens cover works in conjunction with the AV mute function. Closing the lens cover will turn off the image and sound during
normal projector operation; opening it will restore the image and sound.
With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about
2 hours, it will turn off automatically.
• Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause
damage to the lens cover sliding mechanism!
5
Top Features
1. Introduction
9
8 11
6
3
1/2
1. (Power) Button (→ page 14, 25)
2. Power Indicator (→ page 13, 14, 25, 170)
3. Status Indicator (→ page 170)
4. Lamp Indicator (→ page 146, 170)
5. Eco Button (→ page 28)
6. Input Button (→ page 16)
7. Auto Set Button (→ page 24)
8. Menu Button (→ page 78)
9. / Volume Buttons / Keystone Buttons
(→ page 22, 24)
10. Enter Button (→ page 78)
11. Back Button (→ page 78)
10
5
7
4
6
Terminal Panel Features
1235613 12
4
1. Computer 1 In / Component Input Connector
(Mini D-Sub 15 Pin) (→ page 132, 136)
2. Computer 1 Audio In Mini Jack (Stereo Mini)
(→ page 132, 134, 136)
3. Computer 2 In / Component Input Connector
(Mini D-Sub 15 Pin) (→ page 132, 136)
4. Computer 2 Audio In Mini Jack (Stereo Mini)
(→ page 132, 134, 136)
5. HDMI In Connector (Type A)
(→ page 132, 137)
6. USB (PC) Port (Type B)
(→ page 35, 36, 132)
7. Monitor Out (Comp.1) Connector (Mini D-Sub 15
Pin) (→ page 134)
8. Audio Out Mini Jack (Stereo Mini) (→ page 134)
9. S-Video In Connector (Mini DIN 4 Pin)
(→ page 135)
10. Video In Connector (RCA) (→ page 135)
11. Video/S-Video Audio In (L/Mono, R) Connectors
(RCA)
(→ page 135)
12. LAN Port (RJ-45) (→ page 140)
13. USB Port (Type A) (→ page 60)
14. PC Control Port (D-Sub 9 Pin)
(→ page 178)
Use this port to connect a PC or control system. This
enables you to control the projector using serial communication protocol. If you are writing your own program,
typical PC control codes are on page 178. Be sure to use
a crossing cable.
1. Introduction
8711 14910
7
1. Introduction
1
4 Part Names of the Remote Control
3
7
2
4
8
9
11
14
17
18
21
22
23
26
31
1. Infrared Transmitter
(→ page 9)
2. Power On Button
(→ page 14)
3. Power Standby Button
(→ page 25)
4, 5, 6. Computer 1/2/3 Button
(→ page 16)
(Computer 3 button is not available.)
7. Auto Set Button
(→ page 24)
8. Video Button
(→ page 16)
9. S-Video Button
(→ page 16)
10. HDMI Button (→ page 16)
* The Page /, , Mouse L Click and Mouse R Click buttons work only when a USB cable is connected with
your computer.
5
6
10
15
13
12
16
19
20
25
27
24
28
29
30
11. Viewer Button (→ page 16, 58)
12. Network Button (→ page 16)
13. USB Display Button (→ page 16)
14. ID Set Button
(→ page 96)
15. Numeric Keypad Button/Clear Button
(→ page 96)
16. Freeze Button
(→ page 27)
17. AV Mute Button
(→ page 27)
18. Menu Button
(→ page 78)
19. Back Button (→ page 78)
20. Button (→ page 78)
21. Enter Button (→ page 78)
22. Magnify (+)(–) Button
(→ page 27)
23. Mouse L Click Button*
(→ page 35)
24. Mouse R Click Button*
(→ page 35)
25. Page / Button*
(→ page 35)
26. Eco Button (→ page 28)
27. Keystone Button
(→ page 23)
28. Picture Button
(→ page 83, 85)
29. Volume (+)(–) Button
(→ page 24)
30. Aspect Button
(→ page 88)
31. Help Button
(→ page 101)
8
Battery Installation
1. Introduction
1
Press rmly and slide the battery
cover off.
2
Install new batteries (AAA). Ensure
that you have the batteries’ polarity
(+/−) aligned correctly.
3
Slip the cover back over the batteries until it snaps into place. Do not
mix different types of batteries or
new and old batteries.
OPEN
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not short, heat, or take apart batteries.
• Do not throw batteries into re.
• If you will not be using the remote control for a long time, remove the batteries.
• Ensure that you have the batteries’ polarity (+/−) aligned correctly.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
Operating Range for Wireless Remote Control
OPEN
7 m/22 feet
30°
30°
30°
Remote control
Remote control
30°
Remote sensor on projector cabinet
30°
30°
7 m/22 feet
30°
30°
7 m/22 feet7 m/22 feet
• The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of
the remote sensor on the projector cabinet.
• The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls
on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.
9
1. Introduction
5 Operating Environment for Software Included on CD-ROM
Names and Features of Bundled Software Programs
Name of software program Features
Projection Utility • This is a software program used to project your computer’s screen over the
USB cable or the wired/wireless network. The computer cable (VGA) is not
required. (→ page 36, page 154)
• This software program can be used to control the power ON/OFF and source
selection of the projector from your computer.
• The Geometric Correction Tool (GCT) function allows you to correct distortion
of images projected on a curved wall. (→ page 157)
Advanced Network Utility • This is a software program used to send the screens of your personal comput-
ers to the projector via wired/wireless LAN (Meeting mode).
Projected images can be transferred and saved to personal computers.
When “Meeting Mode” is used, projected images can be sent and saved to the
personal computers. Images can be sent from a personal computer to not only
one projector but also to two or more projectors at the same time. (→ page 159)
Advanced Network Utility for Mac • This is a software program used to send the Mac’s screen image to the projec-
tor over a network (wired or wireless LAN). (→ page 165) For Mac’s operating
environment, see page 165.
JPEG Conversion Tool • The JPEG Conversion Tool converts JPEG les not supported by the projec-
tor, image les in other formats, PowerPoint les, and other similar les into
JPEG les. (→ page 168)
Projector Management Utility • Projector Management Utility conforms to the PJLink class 1 standards, and
is compatible with all class 1 commands.
A maximum of 100 projectors connected to the network can be managed
using one computer. (→ page 169)
Projector Management Utility’s operating environment, see page 169.
NOTE:
• Projection Utility does not support “Meeting Mode” in Advanced Network Utility and Advanced Network Utility for Mac included
with our other models.
10
1. Introduction
Operating Environment
The following is the operating environment for Projection Utility. For the operating environment of other software program, refer to the help function of each software program.
Supported OS Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Windows 7 Enterprise
Windows Vista Home Basic
Windows Vista Home Premium
Windows Vista Business
Windows Vista Ultimate
Windows Vista Enterprise
Windows XP Home Edition Service Pack 3 or later
Windows XP Professional Service Pack 3 or later
• Only 32-bit version
• Windows power-saving function is not supported.
Processor • Windows 7/Windows Vista
Pentium M 1.2 GHz equivalent or higher required
Dual core 1.5 GHz or higher recommended
• Windows XP
Pentium M 1.0 GHz equivalent or higher required
Dual core 1.0 GHz or higher recommended
Memory • Windows 7/Windows Vista
512 MB or more required
1 GB or more recommended
• Windows XP
256 MB or more required
512 MB or more recommended
* More memory may be required to run additional applications simultaneously.
Graphic processor • Windows 7/Windows Vista
The “Graphics” score 3.0 or more of “Windows Experience Index” recommended.
Network environment TCP/IP-compatible wired LAN or wireless LAN
(* Use a wireless LAN unit complying with the Wi-Fi standard.)
Resolution • Windows 7/Windows Vista
SVGA (800 × 600) or higher required
XGA (1024 × 768) recommended
• Windows XP
VGA (640 × 480) or higher required
XGA (1024 × 768) recommended
1024 dots × 768 lines - 1280 dots × 800 lines recommended (PJ WX5350N)
Screen Colors High Color (15 bits, 16 bits)
True Color (24 bits, 32 bits) (recommended)
• 256 or fewer colors are not supported.
11
2. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to project a picture onto the screen.
1 Flow of Projecting an Image
Step 1
• Connecting your computer / Connecting the power cord (→ page 13)
Step 2
• Turning on the projector (→ page 14)
Step 3
• Selecting a source (→ page 16)
Step 4
• Adjusting the picture size and position (→ page 17)
• Correcting keystone distortion [KEYSTONE] (→ page 22)
Step 5
• Adjusting a picture and sound
- Optimizing a computer signal automatically (→ page 24)
- Turning up or down volume (→ page 24)
Step 6
• Making a presentation
Step 7
• Turning off the projector (→ page 25)
Step 8
• After use (→ page 26)
12
2. Projecting an Image (Basic Operation)
2 Connecting Your Computer/Connecting the Power Cord
1. Connect your computer to the projector.
This section will show you a basic connection to a computer. For information about other connections, see "2
Making Connections" on page 132.
Connect the computer cable (VGA) between the projector’s Computer 1 In connector and the computer’s port
(mini D-Sub 15 Pin). Turn two thumb screws of both connectors to x the computer cable (VGA).
2. Connect the supplied power cord to the projector.
First connect the supplied power cord’s three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cord in the wall outlet.
The projector’s Power indicator will ash for a few seconds and then will light orange* (standby mode).
The Status indicator will also light green*.
* This will apply for both indicators when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator
section.(→ page 170)
Make sure that the prongs are fully inserted into
both the AC IN and the wall outlet.
To wall outlet ←
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the Power button or if the AC
power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
13
3 Turning on the Projector
1. Slide the lens cover to the left to uncover the lens.
2. Projecting an Image (Basic Operation)
2. Press the
or the Power On button on the remote control.
The Power indicator will turn to blue and the projector will
become ready to use.
TIP:
• When the message “PROJECTOR IS LOCKED! ENTER YOUR
KEYWORD.” is displayed, it means that the [SECURITY] feature
is turned on. (→ page 30)
• When the ECO message is displayed, it means that [ON] is
selected for [ECO MESSAGE]. (→ page 94)
• Pressing buttons such as Power button and Menu button will
make sound. To turn off the beep sound, select [OFF] for [BEEP]
from the menu. (→ page 98)
After you turn on your projector, ensure that the computer or
video source is turned on and that the lens cover is open.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
(Power) button on the projector cabinet
Standby Blinking Power On
Steady orange light Blinking blue light Steady blue light
(→ page 170)
14
2. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When you rst turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one
of the 17 menu languages.
To select a menu language, follow these steps:
1. Use the , , or button to select one of the 17
languages from the menu.
2. Press the Enter button to execute the selection.
After this has been done, you can proceed to the menu operation.
If you want, you can select the menu language later.
(→ [LANGUAGE] on page 80 and 93)
NOTE:
• When turning off the power supply and then back on by using a power strip or breaker.
Allow a minimum of 1 second between turning off the main power supply and turning it back on again.
Failing to do so could result in no power to the projector. (There will be no stand-by LED)
Should this happen, unplug the power cord and plug it in again. Turn on the main power.
• If one of the following things happens, the projector will not turn on.
• If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the
projector will not turn on to protect the internal system. If this happens, wait for the projector’s internal components to cool down.
• When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp.
• If the Status indicator lights orange with the Power button pressed, it means that the [CONTROL PANEL LOCK] is turned on.
Cancel the lock by turning it off. (→ page 95)
• If the lamp fails to light, and if the Status indicator flashes on and off in a cycle of six times, wait a full minute and then turn on
the power.
• While the Power indicator is blinking blue in short cycles, the power cannot be turned off by using the Power button.
• Immediately after turning on the projector, screen flicker may occur. This is normal. Wait 3 to 5 minutes until the lamp lighting is
stabilized.
• When the projector is turned on, it may take some time before the lamp light becomes bright.
• If you turn on the projector immediately after the lamp is turned off or when the temperature is high, the fans run without display-
ing an image for some time and then the projector will display the image.
15
2. Projecting an Image (Basic Operation)
4 Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the Input button once. The projector will search for the available
input source and display it. The input source will change as follows:
COMPUTER1 → COMPUTER2 → HDMI → VIDEO → S-VIDEO →
VIEWER → USB DISPLAY → COMPUTER1 → ...
• With the INPUT screen displayed, you can press the Input button a
few times to select the input source.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the Computer 1, Computer 2, HDMI, Video, S-Video,
Viewer, Network, or USB Display buttons.
Selecting Default Source
You can set a source as the default source so that it will be displayed
each time the projector is turned on.
1. Press the Menu button.
The menu will be displayed.
2. Press the button twice to select [SETUP] and press the button
or the Enter button to select [GENERAL].
3.
Press the button three times to select [OPTIONS(2)].
4. Press the button six times to select [DEFAULT SOURCE SELECT]
and press the Enter button.
The [DEFAULT SOURCE SELECT] screen will be displayed.
(→ page 100)
5. Select a source as the default source, and press the Enter button.
6. Press the Back button a few times to close the menu.
7. Restart the projector.
The source you selected in step 5 will be projected.
NOTE: Even when [AUTO] is turned on, the [NETWORK] will not be automatically
selected. To set your network as the default source, select [NETWORK].
TIP:
• When the projector is in Standby mode, applying a computer signal from a
computer connected to the Computer 1 In input will power on the projector
and simultaneously project the computer’s image.
([AUTO POWER ON(COMP1)] → page 100)
• On the Windows 7 keyboard, a combination of the Windows and P keys allows
you to set up external display easily and quickly.
16
Loading...