Ricoh PJ X2240, PJ WX2240, PJ S2240 User Manual

User’s Manual

Usage Notice

Introduction

Basic Operations

User Settings

Troubleshooting

Replacing the lamp

Appendices

Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Precautions in this manual before using the machine.

English

Table of Contents ............................1

Usage Notice ....................................2

Precautions .........................................2

Safety Labels of This Machine ............8

Regulation & Safety Notices ...............9

Other Information ..............................15

Introduction ....................................16

Product Features ..............................16

Package Overview ............................17

Product Overview .............................18

Connection Ports .................................. 19

Control Panel........................................ 20

Remote Control .................................... 21

Remote Control Battery ....................23

For the First Time .................................23

Replace the Battery .............................. 23

Remote Control Operating Range ........ 24

Basic Operations ...........................25

Connecting the Projector ..................25

Connect to Computer/Notebook ........... 25

Connect to Computer/Notebook ........... 26

Connect to AV Equipment ....................27

Connect to AV Equipment ....................28

Powering On/Off the Projector ..........29

Powering On the Projector ................... 29

Powering Off the Projector ................... 30

Warning Indicator ................................. 31

Adjusting the Projected Image ..........32

Adjusting the Position of Projector

Image ...................................................32

Adjusting the Projector Zoom and

Focus.................................................... 33

Adjusting Projection Image Size........... 33

User Settings .................................35

Using the On Screen Display

(OSD) ................................................35

How to operate .....................................35

PICTURE.............................................. 36

SCREEN ..............................................38

SETTING .............................................. 40

VOLUME (PJ X2240 / PJ WX2240) ..... 41

OPTIONS ............................................. 42

3D ......................................................... 45

Troubleshooting ............................46

Replacing the lamp........................51

Appendices ....................................52

List of Compatible Signals ................52

Congurations of Terminals ..............56

Terminal: Computer In 1/2 (Mini D-sub 15

pin) [Monitor Out].................................. 56

Terminal: PC Control (D-sub 9 pin) ......56

Specications ....................................57

Cabinet Dimensions ..........................58

Trademarks .......................................59

English

Usage Notice

Precautions

Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit.

■ Warning-

This apparatus must be earthed.

Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes.

To reduce the risk of re or electric shock, do not

expose this projector to rain or moisture.

Do not open or disassemble the projector as this may cause electric shock.

When replacing the lamp, allow unit to cool down at least 60 minutes, and follow all

replacement instructions.

When the lamp reaches the end of its life, it will

burn out and may make a loud popping sound.

If this happens, the projector will not turn back

on until the lamp module has been replaced. To

replace the lamp, follow the procedures listed

under “Replacing the Lamp”.

Do not remove the cabinet cover, or you may be

exposed to dangerous voltage. Refer servicing to

qualied service personnel only.

This product should be operated only from the type of power source which does not exceed the

voltage range specied on the rating label and

the power cord. If you are not sure of the type of

power supply to your home, consult your sales

representative or local power company.

Do not use the polarized plug with an extension

cord , receptacle, or other outlet unless the

blades can be inserted completely with three wire grounding type to prevent blade exposure. Failure to follow these instructions may result in

re or electric shock.

English

Usage Notice

■ Warning-

Plastic bags can be dangerous, please do not

leave near babies and young children. To avoid

the threat of suffocation, please keep away from

their nose and mouth.

Installing the Projector on a Wall or Ceiling:

a) Do not attempt to clean or replace parts for a

machine that is installed in a high location on a wall or ceiling. Doing so may cause it to fall

down, resulting in an injury.

b) Do not open the lamp cover of a machine that

is installed on a wall or ceiling. Doing so may cause the lamp cover to fall down. If the lamp

is broken, pieces of glass may fall and cause an

injury.

c) Contact your sales or service representative

to clean or replace parts for a machine that is installed on a wall or ceiling.

d) If a machine is incorrectly installed on a

wall or ceiling, it may fall down and cause

an injury. Contact your sales or service representative if you want to install a machine on a wall or ceiling.

e) Do not obstruct the machine’s vents. Doing

so risks re caused by overheated internal

components.

f) For users, do not install the projector by

yourself. Contact your sales or service representative if you want to install the projector on a wall or ceiling.

g) For sales or service representatives:

- Use brackets that are strong enough to support the projector. The projector weighs about 2.6 kg (5.75 lb.).

- The projector must be installed in a location that is sturdy enough to support the full weight of the projector and brackets.

- Use only the screws (three M4~16 screws) provided with the projector to attach the brackets to the projector.

- Use all three of the projector’s screw holes to attach the brackets. The locations of the screw holes are shown in the illustration below. Make sure that the screws are

tightened rmly.

English

Usage Notice

■ Caution-

Do not use lens cap when projector is powered on.

This projector will detect the life of the lamp itself. Be sure to change the lamp when it shows warning messages.

Never operate this unit on AC power during a thunderstorm. If you see lightning or hear

thunder, never touch the unit, cables and/

or peripherals. An electric surge caused by

the storm, may result in an electrical shock or

damage to the unit.

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result

in a re or electric shock. Never spill liquid of

any kind on the product.

Do not place or keep the projector within the

reach of the children. It may fall or tip over,

possibly causing serious injury.

Do not stack other equipment on this product and do not place this product on other equipment. The top and bottom surface of this product increase in temperature during normal use and may damage the other unit.

Do not use attachments not recommended by RICOH. Use of an incompatible attachments could cause hazards or damage to the product.

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult,

and serious damage to the product.

English

Usage Notice

■ Caution-

Unplug this product from the wall outlet and

take the product to qualied service personnel if

you encounter any of the following conditions: a) The power supply cord or plug is damaged.

b) Liquid has been spilled, or objects have fallen

into the product.

c) The product has been exposed to rain or

water.

d) The product does not operate normally when

following the operating instructions. Adjust only those controls that are covered by the operating instructions.

e) The product has been dropped or damaged in

any way. (If the cabinet should break, please

handle with care to avoid injury.)

This product incorporates glass components,

including a lens and a lamp. If these should

break, please handle with care to avoid injury

and contact your sales representative for repair service. Avoid any broken pieces of glass since they may cause injury. In the unlikely event that

the lamp ruptures, thoroughly clean the area

around the projector and discard any edible items placed in that area since they may be contaminated.

Do not place anything in front of the lens while the projector is operating. Things placed in front

of the lens may overheat and burn or start a re. Unauthorized substitutions may result in re,

electric shock, or other hazards. (Only the

replacement of the lamp should be made by users.)

Upon completion of any service or repairs to this

product, ask the service technician to perform

safety checks to verify that the product is in proper operating condition.

Do not leave thermal paper documents or easily deformed items on top of the unit or near the air exhaust for long periods of time.

English

Usage Notice

■ Caution-

The heat from the unit could erase the

information on the thermal paper, or cause

deformation or warping.

Do not use the product in a closed installation location. Do not place the product in a box or in any other closed installation location. Otherwise

it may overheat, which could result in a risk of re.

English

Usage Notice

Do:

■ After unpacking this product, read the manual carefully, and

follow all the operating and other instructions.

■ Turn off the product before cleaning.

■ Use a soft cloth moistened with mild detergent to clean the

display housing.

■ Disconnect the power plug from AC outlet if the product is not

being used for a long period of time.

Do not:

■ Block the slots and openings on the unit provided for

ventilation.

■ Use abrasive cleaners, waxes or solvents to clean the unit.

■ Use under the following conditions:

- Extremely heat, cold or humidity.

- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

Important: Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handing or operating this product.

English

Usage Notice

Safety Labels of This Machine

1 To replace the lamp, unplug the power cord and then wait for 60

minutes.

2 Do not look into the lens while the lamp is on. The strong light from

the lamp may cause damage to your eyesight.

3 Do not place anything in front of the lens while the projector is

operating. Things placed in front of the lens may overheat and burn

or start a re. If you want to temporarily stop the projected image,

use the AV mute on the remote control or the keypad.

4 This product should be operated only from the type of power

source which does not exceed the voltage range specied on the

rating label and the power cord.

English

Usage Notice

Regulation & Safety Notices

This appendix lists the general notices of your Projector.

Notice: Users in the United States of America

FCC notice

MODEL NAME: RICOH PJ S2240 / RICOH PJ X2240 / RICOH PJ WX2240

TRADE NAME: PROJECTOR MODEL NAME: RICOH PJ S2240 / RICOH PJ X2240 /

RICOH PJ WX2240 Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference received,

including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this device does cause

harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

▀■

Increase the separation between the device and

▀■

receiver.

Connect the device into an outlet on a circuit different

▀■

from that to which the receiver is connected.

Consult the dealer or an experienced radio/television

▀■

technician for help.

English

Usage Notice

RESPONSIBLE PARTY: Ricoh Americas Corporation 5 Dedrick Place, West Caldwell, NJ 07006 Phone: 973-882-2000

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Caution

Changes or modications not expressly approved by the manufacturer could void the user’s authority,

which is granted by the Federal Communications Commission, to operate this projector.

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

Notes to Users in the State of California

Perchlorate Material - special handling may apply, See www. dtsc.ca.gov/hazardouswaste/perchlorate.

WARNING:

you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm.

hands after handling

Handling the cord on this product will expose

Wash

English

Usage Notice

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-

003.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

Declaration of Conformity for EU countries

EMC Directive 2004/108/EC (including amendments)

▀■

Low Voltage Directive 2006/95/EC

▀■

Notice: Users in EU countries

CE Marking Traceability Information (For EU Countries Only)

Manufacturer:

Ricoh Co., Ltd. 3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555,

Japan

Authorized representative: Ricoh Europe PLC

20 Triton Street, London. NW1 3BF, United Kingdom

English

Usage Notice

User Information on Electrical and Electronic

Equipment

Users in the countries where this symbol shown in this section

has been specied in national law on collection and treatment of

E-waste.

Our Products contain high quality components and are designed to facilitate recycling. Our products or product packaging are marked with the symbol below.

This product contains substances which are harmful to humans and the environment.

• The lamp contains mercury.

Please dispose of this product or used lamps in accordance with local

regulations.

The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via the appropriate return and collection systems available. By following these instructions you ensure that this product is treated correctly and help to reduce potential

impacts on the environment and human health, which could otherwise

result from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment. For more detailed information on collection and recycling systems for

this product, please contact the shop where you purchased it, your local dealer or sales/service representatives.

Notice: Users in Turkey

English

Usage Notice

All Other Users

If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/service representatives.

REMOTE CONTROL BATTERY

Warning

• Never throw battery into a re.

Using the battery improperly may cause them to explode or leak and

may result in serious injury. If battery-leaking uid contacts skin, wash the uid off immediately with clean water and consult a doctor. If the uid spills on an instrument, avoid contact and wipe it off using tissue paper. Then dispose of the used tissue paper as ammable

garbage after moistening the tissue with water.

• Do not ingest battery, Chemical Burn Hazard.

The remote control supplied with this product contains a coin cell

battery. If the coin cell battery is swallowed, it can cause severe

internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the

product and keep it away from children. If you think batteries might

have been swallowed or placed inside any part of the body, seek

immediate medical attention.

Notes

• Be sure to use a CR2025 lithium 3.0 V coin battery.

• Dispose of battery in a designated disposal area.

• Attention should be drawn to the environmental aspects of battery

disposal.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace the battery.

• Avoid contact with water or liquid.

• Do not expose the remote control to moisture or heat.

• Do not drop the remote control.

• If the battery has leaked in the remote control, carefully wipe the

case clean and install new battery.

• Dispose of used battery according to the instructions.

• The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or uorescent lighting.

English

Usage Notice

⺊暣㰈婳⚆㓞

Notice: Users in the EU

Note for the Battery and/or Accumulator Symbol

In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II, the above symbol is printed

on batteries and accumulators. This symbol means that in the

European Union, used batteries and accumulators should be disposed of separately from your household waste. In the EU,

there are separate collection systems for not only used electrical and electronic products but also batteries and accumulators. Please dispose of them correctly at your local community waste

collection/recycling centre.

Notice: Users in Taiwan

請勿將電池當作一般垃圾丟棄。這個標誌表示電池不應視為一般垃圾丟棄。僅適用於台灣。

English

Usage Notice

Other Information

Copyrights to Images

When projecting images using the projector, be careful

not to infringe the copyright of protected materials. The following are examples that may infringe the copyright of protected materials.

• Broadcasting images or movies for commercial purposes

• Modifying images or movies using functions such as freeze, magnify, or zoom to broadcast images for commercial

purposes or public viewing

• Varying the aspect ratio of images or movies using a

function that changes the screen size to broadcast images for commercial purposes or public viewing

Note to Users Viewing 3D Images

Pay attention to the following points when viewing images using 3D glasses with projector:

• How 3D images are viewed may vary according to the

individual.

• Do not use 3D glasses for viewing any material other than

3D images.

• Before viewing 3D images, make sure to read the manuals

provided with your 3D glasses and 3D compatible content.

• Avoid viewing 3D images for a long period of time. Take a

break of 15 minutes or longer after every hour of viewing.

• If you feel sick while viewing 3D images, stop viewing them. If you continue to feel sick, consult a doctor.

• When viewing 3D image in a room where on LED lighting system or uorescent lights are used, you may feel that the light in the room ickers. If this is the case, dim the lights until you do not notice any ickers, or turn off the lights.

• If you or any member of your family has a history of lightsensitive seizures, consult a doctor before viewing 3D

images.

English

Introduction

Product Features

Outstanding features include:

 ■ True RICOH PJ S2240 - SVGA / RICOH PJ X2240 - XGA

/ RICOH PJ WX2240 - WXGA addressable pixels

■ Single chip DLP® technology

■ NTSC M (3.58MHz)/NTSC 4.43 MHz/

PAL(B/D/G/H/I/M/N)/SECAM (B/D/G/K/ K1/L) and SDTV(480i/576i), EDTV(480p/576p), HDTV(720p/1080i/1080p) compatible

■ Multi-Auto functions: Auto detection, Auto image and

Auto saving the adjustments

■ Full function remote control

■ User friendly multilingual on screen display

■ Advanced digital keystone correction and high quality

full screen image re-scaling

■ Built-in mono 2-Watt speaker (RICOH PJ X2240 / RICOH

PJ WX2240)

English

Introduction

Read This First

CR2025

Package Overview

This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.

Due to the

difference in applications for each

country, some regions

may have different accessories.

(*1) is only for

RICOH PJ X2240 / RICOH PJ WX2240.

(*2) This supplied

CD-ROM contains an user’s manual in PDF format.

Projector Lens Cap (*1) Remote Control

(with Battery,

please see page 23)

Power Cord Carrying Bag (*1) CD-ROM (*2)

RGB Cable Read This First

+ 44 hidden pages