
RICOH Americas Corporation Content ID# rfg053167
Product Support Guide
Model M101 / M102 / M103
Introduction
Brand/Model Name
Product Concept
Predecessor model
None.
This model is a new segment machine
whose price and print speed are low.
Hardware:
Productivity : 13 ppm.
Features for all models:
The world thinnest printer.
High first print speed.
Connectivity/Software support
Low cost controller for
developing countries.
USB port
(No network connectivity is available.)
USB TWAIN driver.
GDI driver (M101 and M102 / M103 are only supported for use with Windows. )
Ver.Final Page 1 of 18 6/26/2012
Subject to change without notice

Product Support Guide
Model M101 / M102 / M103
Main Frame
NOTE: Order Numbers are provided for reference purposes only. Please use your Pricing Guide for proper
order numbers to insure you receive the correct branding emblem.
Order Number
Options
Supplies/Yields
Supply Yield Condition:
1) ISO/IEC19752 & 3 page per job at 5% coverage is used to measure the above cartridge yields.
2) The condition is standard temperature and humidity.
3) This yield number may change depending on the circumstances and printing conditions.
4) Storage period for toner is 18 months.
5) Starter AIO yield is ~500 prints.
Ver.1.0 Page 2 of 18 6/26/2012
Subject to change without notice

Product Support Guide
M102 (SP 100SU e) (3in1)
M101 (SP 100 e) Printer M103 (SP 100SF e)(4in1)
Model M101 / M102 / M103
Option Compatibility
USB Cable is the only option for these models.
Branding Information
Branding is not required as the machines are shipped as Ricoh.
Configuration
Main Frame Configuration
MFP Options
No options
Feature Comparison To Previous Version
New low cost, “thin”, laser printers designed for developing countries and “personal” use (Windows computer/USB.)
M101 - GDI Printer
M102 - (3in1) GDI Printer, Color Scanner (Flatbed), and B&W Copier.
M103 – (4in1) GDI Printer, Color Scanner (Flatbed and ADF), B&W Copier, and Fax.
Ver.1.0 Page 3 of 18 6/26/2012
Subject to change without notice

Product Support Guide
15 C to 25 C (59 F to 77 F)
Less than 2,000 lux (do not expose the AIO to strong light, especially direct
sunlight)
Less than 0.075 mg/m3 (2.0 x 10-6oz/yd3)
Avoid areas exposed to sudden temperature changes:
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,562 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2”)
Do not place the machine where it may be subject to strong vibrations.
Front to back: within 5mm (0.2”) of level
Right to left: within 5mm (0.2”) of level
Dimensions (W x D x H):M101: 402 x 368.5 x 119 mm (15.83” x 14.51” x 4.69”.)
M102: 402 x 368.5 x 163 mm (15.83” x 14.51” x 6.42”.)
M103: 402 x 368.5 x 205 mm (15.83” x 14.51” x 8.07”.)
Note: Measuring conditions: Front door closed. Rear vertical paper tray, not extended.
Model M101 / M102 / M103
Installation
Installation Requirements
Power Requirements
Input voltage level: 110 - 120 V, 60Hz: 6A
Do not place anything on power cord.
The required wall outlet is a NEMA 5-15R (receptacle)
Space
Foot Print
Ver.1.0 Page 4 of 18 6/26/2012
Subject to change without notice

Product Support Guide
Installation
Time
(Minutes)
Installation Time
(Minutes)
-30°C to 40°C (-22 to 104°F)
15% to 80% Relative Humidity
-30°C to 40°C (-22 to 104°F)
15% to 95% Relative Humidity
-30°C to 40°C (-22 to 104°F)
15% to 80% Relative Humidity
-30°C to 40°C (-22 to 104°F)
15% to 80% Relative Humidity
Model M101 / M102 / M103
Power Consumption / Noise Emission
Power Consumption
Noise Emission / (Sound Pressure Level)
NOTE: The above measurements were made in accordance with ISO
7779. The measurements were taken from the normal position of
the operator.
Installation Times
Storage/Transportation
NOTE: (*1) Do not store more than 12 hours in temperatures between 45 and 50°C (113-122°F). Do not store
more than a 1 week in temperatures between 40 and 45°C (104-113°F). Store in a dry, dark place where
temperature does not exceed 40°C (104°F) on continuance storage/transportation conditions.
Ver.1.0 Page 5 of 18 6/26/2012
Subject to change without notice

Product Support Guide
PC for Windows 2000/XP/Vista/7,
Windows server 2003/2003 R2,
2008. (USB)
Note: PC is necessary to update
the firmware
Used in common with other
printers.
less than 10,000
pages/month
less than 10,000
pages/month
less than 10,000
pages/month
Model M101 / M102 / M103
Parts / Special Tools / Maintenance
PM Parts / Yields
Mainframe
User Maintenance
AIO (All in One cartridge)
Options
No options
Special Tools & Lubricants
Target Reliability
Ver.1.0 Page 6 of 18 6/26/2012
Subject to change without notice