Ricoh DDST A, DDST Unit Type B, DDST B User Manual
DDST Unit Type A / Type B
Operating Instructions
Printer / Scanner Reference
Getting Started
1
Installing the Software
2
Using the Printer Function
3
Using the TWAIN Scanner Function
4
Troubleshooting
5
Appendix
6
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the
Safety Information in the "Copy Reference" before using the machine.
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
Trademarks
Microsoft
®
, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.
The proper names of the Windows operating systems are as follows:
• The product name of Windows
• The product name of Windows
• The product name of Windows
Microsoft
Microsoft
Microsoft
• The product name of Windows® XP are as follows:
Microsoft
Microsoft
• The product names of Windows ServerTM 2003 are as follows:
Microsoft
Microsoft® Windows ServerTM 2003 Enterprise Edition
Microsoft
®
Windows® 2000 Advanced Server
®
Windows® 2000 Server
®
Windows® 2000 Professional
®
Windows® XP Professional
®
Windows® XP Home Edition
®
Windows ServerTM 2003 Standard Edition
®
Windows ServerTM 2003 Web Edition
®
98 is Microsoft® Windows® 98
®
Me is Microsoft® Windows® Millennium Edition (Windows Me)
®
2000 are as follows:
Notes
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Depending on which country you are in, your machine may include certain options as standard. For
details, please contact your local dealer.
Manuals for This Machine
The following manuals describe the operational procedures of this machine. For
particular functions, see the relevant parts of the manual.
Note
❒ Manuals provided are specific to machine type.
❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file.
❖ General Settings Guide
Provides an overview of the machine and describes System Settings (paper
trays, Key Operator Tools, etc.), and troubleshooting.
❖ Network Guide
Describes procedures for configuring the machine and computers in a network environment.
❖ Copy Reference
Describes operations, functions, and troubleshooting for the machine’s copier
function.
❖ Printer/Scanner Reference (this manual)
Describes system settings, operations, functions, and troubleshooting for the
machine’s printer/scanner function.
i
TABLE OF CONTENTS
Manuals for This Machine ......................................................................................i
How to Read This Manual .....................................................................................1
1. Getting Started
Control Panel..........................................................................................................3
Reading the Display and Using Keys.........................................................................4
Connecting the Machine .......................................................................................5
Requirements.............................................................................................................5
Connecting the machine to the host using a USB cable............................................5
2. Installing the Software
Auto Run.................................................................................................................7
Installing the Printer Driver...................................................................................8
Installing the TWAIN Driver...................................................................................9
Software Supplied on CD-ROM ..........................................................................10
DDST Driver.............................................................................................................10
DDST TWAIN Driver ................................................................................................10
3. Using the Printer Function
Printer Features Menu .........................................................................................11
Adjusting Printer Features..................................................................................12
Printer Features Parameters...............................................................................13
Paper Input...............................................................................................................13
List/Test Print ...........................................................................................................13
Maintenance.............................................................................................................14
System .....................................................................................................................16
Host Interface...........................................................................................................16
Setting Paper on the Bypass Tray......................................................................17
Setting the paper size ..............................................................................................18
Setting custom size paper........................................................................................19
Setting thick paper or OHP transparencies ..............................................................20
Setting envelopes.....................................................................................................21
Setting Up the Printer Driver and Canceling a Print Job .................................23
Windows 98SE / Me - Accessing Printer Properties ................................................23
Windows 2000 / XP and Windows Server 2003 - Accessing Printer Properties ......24
Canceling a Print Job ...............................................................................................25
4. Using the TWAIN Scanner Function
TWAIN Scanner ....................................................................................................27
Preparation for Using the Network TWAIN Scanner.........................................28
TWAIN Scanner Screen...........................................................................................28
Setting Originals ..................................................................................................29
Placing Originals ......................................................................................................29
Scanning Originals ..............................................................................................32
ii
5. Troubleshooting
The Printer Function............................................................................................33
Error & Status Messages on the Display .................................................................33
The Machine Does Not Print ....................................................................................36
Other Printing Problems...........................................................................................38
The Scanner Function .........................................................................................40
When Scanning Is Not Performed as Expected .......................................................40
When an Error Message Appears on the Client Computer......................................41
6. Appendix
The Printer Function............................................................................................43
Collate and Rotating Collate ....................................................................................43
Edge to Edge Printing ..............................................................................................43
The Scanner Function .........................................................................................44
Relationship between Resolution and File Size .......................................................44
Specifications.......................................................................................................45
Printer.......................................................................................................................45
Scanner....................................................................................................................46
INDEX......................................................................................................... 47
iii
iv
How to Read This Manual
R
R
Symbols
In this manual, the following symbols are used:
WARNING:
This symbol indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.
CAUTION:
This symbol indicates a potentially hazardous situation which, if instructions
are not followed, may result in minor or moderate injury, or damage to property.
* The statements above are notes for your safety.
Important
If this instruction is not followed, paper might misfeed, originals might be damaged, or data might be lost. Be sure to read this.
Preparation
This symbol indicates prior knowledge or preparation is required before operation.
Note
This symbol indicates precautions for operation, or actions to take after mal-operation.
Limitation
This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.
Reference
This symbol indicates a reference.
[]
Keys and buttons that appear on the computer's display.
[]
Keys that appear on the machine's display.
{}
Keys built into the machine's control panel.
{}
Keys on the computer's keyboard.
1
2
Control Panel
1. Getting Started
1 2
3
Copy
Scanner
Printer
Duplex
Combine/
Series
111512 13 14
4
Sort
5
Lighter Darker
1. {Scanner} key
Press to activate the scanner function.
2. {Printer} key
Press to activate the printer function.
3. Indicators
Displays errors and machine status.
h: Error indicator. See Network Guide
and General Settings Guide.
B
: Load Paper indicator. See
Copy Reference
D: Add Toner indicator. See Copy Reference.
4. Display
Displays operation status and messages.
5. Selection keys
Correspond to items on the display. Press
to select the corresponding item.
6. Scroll keys
Press to select an item.
{U}: scroll upward
{T}: scroll downward
{V}: scroll right
{W}: scroll left
7 98 10
User Tools/Counter
ABC DEF
MNOJKLGHI
WXYTUV
OPER
Enter
ClearModes
Clear/Stop
Start
ANX003S
Escape
6
Original
OK
PRS
Text
Photo
9. Main power indicator and On in-
dicator
The main power indicator lights when
the main power switch is turned on. The
On indicator lights when the operation
switch is turned on.
10. Operation switch
Press to turn the power on. The On indicator
lights. To turn the power off, press again.
.
Note
❒ This key is inactivate during printing
or while setting printer defaults.
11. {Online} key
Press to switch the printer between online and offline.
12. Data In indicator
Blinks while the printer is receiving data
from a computer or printing. Lit when
preparing to print.
13. {Escape} key
Press to cancel an operation or return to
the previous display.
7. {User Tools/Counter} key
Press to change default or operation parameters according to requirement.
8. {Clear/Stop} key
Clear: clears an entered numeric value.
14. {OK} key
Press to set a selected item or entered numeric value.
15. Number keys
Press to enter numeric values.
3
1
4
Getting Started
Reading the Display and Using Keys
This section explains how to read the display and using the selection key for the
initial display.
Note
❒ The copy display is set as the default screen when the machine is turned on.
You can change the settings in [System Settings]. See General Settings Guide.
123
1. Selection keys
Correspond to the function items at the
bottom line on the display.
Example: Basic screen
When the instruction "press [JobReset]"
appears in this manual, press the center
selection key.
2. {Escape} key
Press to cancel an operation or return to
the previous display.
Escape
OK
ANX007S
3. {OK} key
Press to set a selected item or entered numeric value.
4. Scroll keys
Press to move the cursor in each direction, step by step.
When the {U}, {T}, {V}, or {W} key appears in this manual, press the scroll key
of the same direction.
4
Connecting the Machine
Connecting the Machine
Reference
For details about connection using
Ethernet, see "Connecting the Network Cable to the Network", Net-
work Guide.
Requirements
Before using this machine, make sure
all environmental and electrical requirements are met. Connect the machine to the host computer using the
USB port or network interface unit.
Make sure all cables, connectors, and
electrical outlets necessary to attach
the machine to the host computer or
network are close at hand.
Connecting the machine to the host using a USB cable
You can connect the machine to the host
computer using a USB interface cable.
The USB cable is provided according
to machine model:
• Standard model
The USB cable is provided for this
model.
• Network standard model
The USB cable is not provided for
this model. Purchase a cable that is
suitable for connecting this model
to your computer.
A Connect the USB 2.0 interface ca-
ble to the USB port on the right
side of the machine's back cover.
ANX001S
B Connect the other end to the USB
port on the host computer.
The machine and computer are
now connected. The printer driver
and TWAIN driver must be installed next. For details about how
to install the printer driver and
TWAIN driver, see p.8 “Installing
the Printer Driver” and p.9 “Installing the TWAIN Driver”.
Note
❒ If USB 2.0 is used with Win-
dows 98 SE/Me, only a speed
equivalent that of USB 1.1 is
possible.
1
Follow the procedure below to connect the machine to the host computer
using a USB interface cable.
5
1
Getting Started
6
2. Installing the Software
This manual assumes you are familiar with general Windows procedures and
practices. If you are not, see the operating instructions that come with Windows
for details.
Auto Run
Inserting the CD-ROM into the CDROM drive starts the installer automatically. The installer helps you install the following printer drivers and
software easily.
Note
❒ When “plug and play” starts, click
[Cancel] in [New Hardware Found],
[Device Driver Wizard] or [Found New
Hardware Wizard] dialog box, and
then insert the CD-ROM. The [New
Hardware Found], [Device Driver Wizard] or [Found New Hardware Wizard]
dialog box appears depending on
the system version of the Windows
98SE / Me / 200 / XP, or Windows
Server 2003.
❒ Auto Run may not work with cer-
tain operating system settings. If
this happens, launch "Setup.exe"
on the CD-ROM root directory.
❒ To disable Auto Run, press the left
{SHIFT} key when inserting the
CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
Limitation
❒ Under Windows 2000 / XP, or
Windows Server 2003, installing
software using Auto Run requires
Administrator permission. When
you install software using Auto
Run, log on using an account that
has Administrators permission.
7
Installing the Software
Installing the Printer Driver
2
When you are using the printer function, you must install the printer driver on the supplied CD-ROM.
A Quit all applications currently run-
ning.
B Insert the CD-ROM into the CD-
ROM drive.
The driver installer starts.
C Select an interface language, and
then click [OK].
The default interface language is
English.
D Click [DDST Printer Drivers].
The DDST Printer Drivers installer
starts.
E The software license agreement
appears in the [License Agreement]
dialog box. After reading through
its contents, click [I accept the agree-
ment.], and then click [Next >].
Note
❒ The printer driver has been in-
stalled, plug and play is enabled, and the icon of the printer
connected to the “USB” port is
added to the [Printers] or [Print-
ers and Faxes] window.
❒ When you use the printer func-
tion on the Ethernet interface
under Windows 98SE / Me, see
"Using the Printer Function",
Network Guide.
❒ When you use the printer func-
tion on the Ethernet interface
under Windows 2000 / XP /
Server 2003, see "Using the
Printer Function", Network
Guide.
F Follow the instructions on the
display to install DDST Printer
Drivers.
If you are required to restart the computer after installing DDST Printer
Drivers, restart the computer.
8
Installing the TWAIN Driver
When you are using the scanner function, you must install the TWAIN
driver on the supplied CD-ROM.
A Quit all applications currently run-
ning.
B Insert the CD-ROM into the CD-
ROM drive.
The driver installer starts.
C Select an interface language, and
then click [OK].
The default interface language is
English.
D Click [DDST TWAIN Driver].
Installing the TWAIN Driver
2
The DDST TWAIN Driver installer
starts.
E Click [Close].
9
Installing the Software
Software Supplied on CD-ROM
There are some CD-ROMs that come with the printer option of this machine.
DDST Driver
2
The DDST drivers are included on the CD-ROM that comes with this machine.
This allows the computer to communicate with the machine via a printer language.
❖ System requirements
Operating system
• Microsoft Windows 98SE
• Microsoft Windows Me
• Windows 2000
•Windows XP
• Windows Server 2003
Hard disk space
• 80 MB or more
DDST TWAIN Driver
This driver is required to scan an original on the machine.
To use the machine as a network TWAIN scanner, this driver must be installed.
❖ System requirements
10
•Hardware
PC/AT compatible
•CPU
Pentium 300 MHz or faster recommended
• Operating system
Microsoft Windows 98 (SE or later)
Microsoft Windows Millennium Edition
Microsoft Windows 2000 Professional
Microsoft Windows 2000 Server
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
•Memory
128 MB or more recommended
• Hard disk space
200 MB or more
•Connection
Ethernet/USB
3. Using the Printer Function
Printer Features Menu
There are five menu items in the Printer Features menu:
Reference
For more information about copier features and system settings, see Copy Reference and General Settings Guide.
•Paper Input
• List/Test Print
•Maintenance
•System
•Host Interface
You can select the following functions.
Menu
Paper Input
See p.13 “Paper Input”.
List/Test Print
See p.13 “List/Test
Print”.
Maintenance
See p.14 “Maintenance”.
System
See p.16 “System”.
Host Interface
See p.16 “Host Interface”.
*1
Appears on the duplex standard model. Check your machine type.
Bypass Paper Size
Auto Paper Select
Duplex
Operations Test
Menu Protect
Auto Continue
Edge Smoothing
Toner Saving
I/O Timeout
*1
Default
11
Loading...