Page 1
This section explains displaying still images and movies you have
downloaded to your computer.
• For the rest of this explanation, still images and movies will be referred to together as "images".
• When downloading images from your camera, it is recommended you safeguard the power supply by using
the AC Adaptor (sold separately). The explanations provied here assume that the AC Adaptor is begin used.
Please do not connect your camera to the computer before installing the software for
downloading.
If you happened to connect your camera to computer (resulting in the [Add New Hardware Wizard] screen
appearing), simply click [Cancel], and after disconnecting your camera, install the software on your computer.
Chapter 2 Playing back Images on a
Computer (Pictures/Movies)
Section 1 Downloading Images to a
Computer (For Windows)
Page 2
118
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
Using the Software Provided
The CD-ROM that comes with your camera contains software for downloading images from the
camera to a computer and displaying them on it. The following software is included.
DirectX is used to play movie files in Windows. However, the versions earlier than 7.1 do not allow you to play
movie files. Install an updated version.
Installing DirectX
1. Insert the Caplio Software CD-ROM in the CD-ROM drive and select the [DirectX] folder under the CD-ROM
drive using Internet Explorer.
2. If using Windows98/98SE/Me or Windows2000, double-click [DX81xxx.exe] or [Win2000] respectively.
Software and OS Applicability Table
The software that can be used differs according to the OS in use, as indicated in the table below.
Application Name Used For
RICOH Gate La for Windows Downloading images
WIA driver Downloading images (For Windows XP)
USB driver Connecting your camera to computer
DU-10 Displaying images on your computer
Acrobat Reader Software used to browse the contents of a manual in a PDF file
Application Name Windows XP
Windows 98/98SE/
Me/2000
RICOH Gate La for Windows O O
DU-10 O O
USB driver O O
WIA driver O X
Acrobat Reader O O
Page 3
119
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
System Requirements Specification
Compatible computers Computers with Windows98/98SE/Me/2000/XP pre-installed, with a standard USB
Port, whose operation is guaranteed by the PC manufacturer
CPU Pentium 2 or higher
Memory Windows 98/98SE: 32MB or more (96MB or more recommended)
Windows Me: 64MB or more (96MB or more recommended)
Windows 2000: 128MB or more (256MB or more recommended)
Windows XP: 128MB or more (256MB or more recommended)
Hard drive space required for
installation
Windows 98/98SE: 10MB or more
Windows Me: 10MB or more
Windows 2000: 10MB or more
Windows XP: 10MB or more
Display resolution 640 X 480 dots or greater (800 X 600 or greater recommended)
Display colors 256 colors or greater (65000 or greater recommended)
CD-ROM drive A CD-ROM drive compatible with the above-mentioned computer body
USB port A USB port compatible with the above-mentioned computer body
System Requirements
The following environments are necessary for using the provided software. Please check your
computer, or the computer's user manual.
• If your computer has an upgraded OS, the USB function may not work normally, so it cannot be supported.
• Problems may arise due to changes made to the OS, such as through patches or a service package release.
• Connection to a USB port retrofitted using an extended function (PCI bus, etc.) cannot be supported.
• If used in conjunction with a hub or other USB devices, the software may not work properly.
• When dealing with movies and other large files, a larger memory environment is recommended.
Page 4
120
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
Preparing to Download Images to Your Computer
This section shows the flow of downloading images to your computer by using the Caplio CD-ROM
included with the camera.
Insert the included CD-ROM into the CD-ROM drive of your
computer and the screen shown on the right appears.
ŶThe screen shown here is from Windows XP.
For all versions of except for Windows XP
...p.121
Windows XP
...p.123
Install the software.
Install Acrobat Reader, if necessary:
Connect the camera to your computer.
...p.126
...
p.127
Download images to the computer.
To uninstall the software, see p.122 (or p.124 for Windows XP).
You can browse the manuals on CD-ROM by clicking this button.
Acrobat Reader...p.125
Page 5
121
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
For Windows 98/98SE/Me/2000
In Windows 2000, only a user with administrative
privileges can perform installation.
Start your computer.
Insert the CD-ROM in the CD-ROM drive.
The following screen appears automatically.
Click [Install Software].
After a few moments, the [Choose Setup Language]
screen appears.
Select a language to use and then click the
[OK] button.
After a few moments, the [Welcome to the
InstallShield Wizard] screen appears.
Click [Next].
After a few moments, the [Choose Destination
Location] screen appears.
Confirm where you want to install and then
click [Next].
After a few moments, the [Select Program Folder]
screen appears.
Confirm the program folder and then click the
[Next] button.
Installation begins and after a while the following
screen appears.
Click the [Finish] button.
Installation is complete.
Installation
• If it is not displayed automatically, take the following steps.
1. Double-click the [My Computer] icon, and then double-click the CD-ROM drive icon.
2. Double-click the AutoRun file (Autorun.exe) displayed in the CD-ROM drive window.
• You may need to restart your computer after installation.
Page 6
122
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
Uninstalling the Software (For
Windows 98/98SE/Me/2000)
When you want to remove the software, follow
the steps below (this operation is called
uninstallation).
In Windows 2000, only a user with administrative
privileges can uninstall the software.
Click [Start] on the Windows task bar.
The [Start] menu appears.
Select [Settings] and then [Control Panel].
The control panel screen appears.
Double-click the [Add/Remove Programs]
icon
Select [Caplio Software] and then click
[Change/Remove].
Select the language to use and then click the
[OK] button.
A message appears to confirm whether you
want to remove the program: click [Yes].
The uninstallation process begins and a
message appears when it is finished: click
[OK].
A message may appear prompting you to restart the
computer. In this case, select restart then click
[Complete]. The computer will restart.
Once you click [OK], the [Add/Remove
Programs] dialog box closes.
Click the [×] (Close) button to close the
Control Panel.
Page 7
123
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
For Windows XP
In Windows XP, only a user with administrative
privileges can install the software.
Start your computer.
Insert the CD-ROM in the CD-ROM drive.
The following screen appears automatically on your
computer screen.
Click [Install Software].
After a few moments, the [Choose Setup Language]
screen appears.
Select the language to use and then click the
[OK] button.
After a few moments, the [Welcome to InstallShield
Wizard] screen appears.
Click [Next].
After a few moments, the [Choose Destination
Location] screen appears.
Confirm where you want to install and then
click [Next].
After a few moments, the [Select Components] screen
appears.
Confirm the software you want to install and
then click [Next].
Thereafter, if you continue the operation by following
the messages, the [Finish] screen of the [InstallShield
Wizard] will appear.
If a message appears asking you whether you want to
restart your computer, select [Yes, restart my
computer now.] then click [Finish]. The computer will
restart.
If it is not displayed automatically, take the following steps.
1. Click the [Start] button on the task bar and then select [My Computer] from the start menu.
2. Double-click the CD-ROM drive icon displayed in the [My Computer] window.
3. Double-click the AutoRun file (Autorun.exe) displayed in the CD-ROM drive window.
Page 8
124
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
Uninstalling the Software (For
Windows XP)
When you want to remove the software, follow
the steps below (this operation is called
uninstallation).
For Windows XP, only a user with administrative
privileges can uninstall the software.
Click [Start] on the Windows task bar.
The [Start] menu appears.
Select [Control Panel] from the [Start] menu.
The control panel screen appears.
Click the [Add/Remove Programs] icon.
Select [Caplio Software] and then click
[Change/Remove].
Select the language to use and then click the
[OK] button.
A message appears to confirm whether you
want to remove the program: click [OK].
The uninstallation process begins and a
message appears when it is finished. Click
[Finish].
If a message appears asking you whether you want to
restart your computer, select [Yes, restart my
computer now.] then click [Finish]. The computer will
restart.
Once you click [OK], the [Add/Remove
Program] dialog box closes. Click the [×]
(Close) button to close the Control Panel.
After the uninstallation is complate, please restart
your computer.
Page 9
125
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
Power on the computer, and insert the
included Caplio CD-ROM into the CD-ROM
drive.
The following screen appears automatically.
Click [Browse CD-ROM].
The files on the CD-ROM are listed.
Double-click the [Acrobat] folder.
Double-click the [English] folder.
Double-click [ar500enu] (ar500enu.exe).
Install Acrobat Reader by following the
messages displayed.
Installing Acrobat Reader
Acrobat Reader is software used to browse the contents of a manual in a PDF file.
If you are using Windows, you can install Acrobat Reader in your computer.
In Windows XP or 2000, only a user with administrative privileges can install the software.
Page 10
126
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
Make sure the camera's power is off.
Connect the USB cable to the USB port of
your computer.
Open the terminal cover, and then connect
the USB cable to its USB terminal.
Your camera turns on.
In Windows XP, the first time you connect your
camera to the computer using a USB cable, the
[Found New Hardware Wizard] screen will
appear.
Select [Install from a list or specific location
(Advanced)].
Select [Next].
Select [Search for the best driver in these
locations.] -[Include this location in the
search] and then press the [Browse] button.
Select the folder, where the Caplio Software
is installed, that has the [WIA driver] (For
example, C:\Program Files\Caplio Software
\WIA driver) and then select [Next].
The WIA Driver is installed.
Connecting the Camera to a Computer
After installing the software on your computer, connect your camera to it.
Disconnecting your camera from computer
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
• When you are downloading images from your camera, the AC Adaptor (sold separately) is recommended.
Page 11
127
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
For Windows 98/98SE/Me/2000/
XP
RICOH Gate La automatically creates a folder
called [Caplio] inside your [My Documents]
folder. Downloaded images are saved in folders
with the date of each shot, inside the [Caplio]
folder.
Connect your camera to the computer using
the USB cable.
The camera turns on, RICOH Gate La starts, and the
RICOH Gate La window appears.
Image transfer begins automatically.
Once download finishes, DU-10 launches, and you
can view the images.
If the screen below appears, select "RICOH Gate La",
check the box next to "Always use this program for
this action" and then press [OK].
Downloading Pictures to Your Computer
After you have connected your camera to the computer, images downloaded automatically.
Images are downloaded to your computer from the following memory sources.
When no memory card is loaded
Downloads from
internal memory
Downloads from SD
Memory Card
When an SD Memory Card is loaded
For how to change files names when recording, see p.111.
• Before closing RICOH Gate La, if you turn ther camera power off, or unplug the USB cable, the RICOH Gate
La window is minimized and displayed as an icon on the Windows task bar. If you click the icon, the window
will be displayed again.
• After exiting RICOH Gate La by pressing the [MENU] button and selecting [Close], if you want to restart
RICOH Gate La, follow the steps below.
Select [Program] from the [Start] menu then select Caplio Software then RICOH Gate La.
• You can change the folder for downloading your images (Save Destination).
• For how to change the Save Destination Folder, see p.129.
• For how to start RICOH Gate La, see p.128.
• For RICOH Gate La screen, see p.128.
• For when images fail to transfer properly, see p.160.
Page 12
128
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
How to Use RICOH Gate La
When you are in the RICOH Gate La window, you can specify settings for each of the various
functions, such as automatically saving when connected, the destination for downloading images
(save destination), and so on.
The RICOH Gate La Window
Once RICOH Gate La starts up, the following
RICOH Gate La window appears on your
computer screen.
1. [MENU Button]
Click this and the following menu appears.
Menu:
[Option settings]: Specifies where to save images, or
which application to launch when you press the
Application button and after saving. (See p.129)
[Background illustration settings]: Changes the
background design in the RICOH Gate La window.
(see p.130)
[About]: Displays the version of RICOH Gate La.
[Exit]: Closes RICOH Gate La.
2. [Save Button]
Click this and the images are downloaded from your
camera.
3. [Application Button]
The application registered in Optional Settings is
launched. DU-10 is registered initially.
4. [Minimize Button]
Minimizes the window and displays its icon on the
Windows task bar. If you click on it, the window will be
displayed.
5. [Indicator]
The indicator lights if the camera is connected via
USB cable. When lit, if you put the mouse pointer on
the Indicator, it displays "Camera Connected." When
your camera is not connected, the Indicator is grayed
out, and if you put the mouse pointer on it, “Camera
Connected” does not appear.
Page 13
129
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
How to Use the Optional settings
If you select [Option settings] from the menu
displayed on a button in the RICOH Gate La
window, the [Option settings] dialog box
appears.
Item Description Initial Setting
① [Automatically save on
connection]
If you check this box, once your camera is connected to the
computer, images are automatically downloaded and
saved.
If you uncheck the box, even when your camera is
connected, your images will not download automatically.
Click the [SAVE] button when you want to download.
Execute auto save
② [Destination folder]
Specifies which folder to save your images in. The [Caplio]
folder inside [My Documents] is specified initially; if you
want to change this, click the [Browse] button to display the
dialog box and then specify the folder.
③ [Create folder]
Specifies how to create a folder.
[Not created]
Your downloaded images will all be saved in the folder
specified in item 2.
[For each date photographed]
Creates a new folder assigning the date it was shot as
the folder name, and saves images shot on the same
day in the same folder.
[For each time saved]
Creates a new folder for each time images are saved
and saves the images shot at the same time in the
same folder. If you save several times in one day, they
are saved in separate folders each time.
Each day shot
④ [The same image will not
be saved.]
You can specify this only when you have selected either
[Do not Create] or [Each Day Shot] in [Create a Folder]
or if in [Create a Folder] you did not check [Do not save
same image when saving].
If you try to save a file to a folder that has an image file of
the same name, it will not be saved.
Do not save same image
⑤ [Application software
settings]
Specify the name of the program if you want an application
to launch after you save. The [Caplio] folder DU-10.exe
(DU-10 File Name) is specified initially; if you want to
change this, click the [Browse] button to display the dialog
box and then specify which application to use.
⑥ [Save and start application
software]
If this is checked, an application will be launched after
saving.
If this is unchecked, no application will be launched.
After saving. Launch application
Page 14
130
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
How to Use the Background
Illustration Settings
You can select a background for the RICOH
Gate La window from three types of patterns.
If you select [Background illustration setting]
from the menu displayed by the [MENU] button
in the RICOH Gate La window, the [Background
illustration settings] dialog box appears.
1. [Background illustration pattern]
Select the pattern you wish to use from the three
available.
2. [Preview]
The pattern selected in [Background illustration
pattern] appears, and you can configure it.
Page 15
131
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
Images in a PC Card
Images are stored on SD Memory Card in a
hierarchy, as shown here.
For Downloading Images Directly to Your Computer from an SD Memory Card
If the card reader is SD Memory Card compatible, the PC Card Adaptor FM-SD53 (sold separately) is not
required.
Card Reader
This is a device that connects to a computer and can read the contents of cards like the SD Memory Card. In
addition to the PC Card type, there are Card Readers compatible with various types of cards, such as SD
Memory Cards, into which you can directly insert an SD Memory Card.
Downloading images via USB connection between computer and camera was explained previously,
but it is possible to download images from SD Memory Card to computer via a PC Card Slot or Card
Reader.
The FM-SD53 PC Card adaptor (sold separately) is required to load an SD Memory Card into a PC
Card Slot or Card Reader.
Page 16
This section explains displaying still images and movies you have
downloaded to your computer.
• For the rest of this explanation, still images and movies will be referred to together as "images".
• When downloading images from your camera, it is recommended you safeguard the power supply by using
the AC Adaptor (sold separately). The steps here are explained on the premise that the AC Adaptor is used.
Please do not connect your camera to the computer before installing the software for
downloading.
Section 2 Downloading Images to a
Computer (For Macintosh)
Page 17
133
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
Using the Software Provided
The CD-ROM that comes with your camera contains software for downloading images from the
camera to a computer and displaying them on it. The following software is included.
• If you are using Mac OS X10.1.2 to 10.2.1, you can display images using "iPhoto".
• If you are using Mac OS X 10.1.2 to 10.1.5, drag the Caplio volume icon and drop it into the iPhoto window.
• If you are using Mac OS X 10.2 to 10.2.1, a photo can be transferred directly by using the Read button of
iPhoto. The Caplio cannot be mounted directly by using the Read button.
• You cannot display movie files in iPhoto. Please use QuickTime instead.
Software and OS Applicability Table
The software that can be used differs according to the OS in use, as indicated in the table below.
Application Name Used For
RICOH Gate La for Macintosh Downloading images (for Macintosh)
USB driver Connecting your camera to computer
Mounter Downloading images
Application Name
Mac OS
8.6 to 9.2.2
Mac OS X
10.1.2 to 10.2.1
RICOH Gate La for Macintosh O X
USB driver O O
Mounter O O
Page 18
134
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
System Requirements
The following environments are necessary for using the provided software. Please check your
computer, or the computer's user manual.
System Requirements Specification
Operating System Mac OS 8.6 to 9.2.2/Mac OS X 10.1.2 to 10.2.1
Macintosh A USB port standard-equipped Apple Macintosh Series
Internal Memory Mac OS 8.6 to 9.2.2 96 MB or more (128 MB or more recommended)
Mac OS X 10.1.2 to 10.2.1 128 MB or more (256 MB or more recommended)
Application allocated Memory
(For Mac OS 8.6 to 9.2.2)
Without using the compression utility, 16MB or more (24 MB or more is
recommended) as Application Memory
Hard Disc Drive Capacity Mac OS 8.6 to 9.2.2 10 MB or more (at installation)
Mac OS X 10.1.2 to 10.2.1 100 MB or more (at installation)
Display Resolution 640 X 480 dots or greater (800 X 600 or greater recommended)
Display Colors 256 colors or greater (32,000 or greater recommended)
CD-ROM Drive A CD-ROM drive compatible with the above-mentioned Macintosh machine
USB Port A USB Port compatible with the above-mentioned Macintosh machine
• When dealing with movies and other large files, a larger memory environment is recommended. For Mac OS
8.6 to 9.2.2, use a larger memory environment, as well as allocating extra application memory.
• While the software can be operated at 256 colors or more for the Display Color, it is strongly recommended
that 32,000 or more be used.
• If the computer does not have a USB port, it is possible to download images from SD Memory Card using a
PC card slot or card reader.
For how to download images to your computer when using an SD Memory Card, see p.131.
• Problems may arise due to changes made to the OS.
• Connection to a USB port retrofitted using an extended function (for example, PCI bus) cannot be supported.
• If used in conjunction with a hub or other USB devices, the software may not work properly.
Page 19
135
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
Preparing to Download Images to Your Computer
This section shows the flow of downloading images to your computer by using the Caplio CD-ROM
included with the camera.
Mac OS 8.6 to 9.2.2
Mac OS X 10.1.2 to 10.2.1
Install the software.
Connect the camera to your computer.
Download images to the computer.
...p.139
...p.140
Mac OS 8.6 to 9.2.2...p.136
Mac OS X 10.1.2 to
10.2.1
...p.137
Insert the included CD-ROM into the CD-ROM
drive of your computer and the window or icon
shown on the left appears.
To uninstall the software, see p.138.
Page 20
136
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
Installation
For Mac OS 8.6 to 9.2.2
If RCD-iMounter 6.0 was previously installed,
remove files in the following manner.
• Delete files that start with RDC that are in the Control
Panel folder.
• Delete files that start with RDC that are in the Function
Extensions folder.
• Delete files that start with RDC that are in the Initial
Settings Folder.
Turn on your Macintosh.
Insert the attached CD-ROM in the CD-ROM
drive.
The CD-ROM icon is displayed on the desktop.
Double-click the CD-ROM icon, and open the
[MacOS9] folder.
The [Caplio Installer] icon appears.
Double-click the Installer [Caplio Installer]
icon.
The Installer starts up and the Start screen appears.
Click [Caplio Software].
Click the [OK] button.
The Installation screen appears.
Click [Install].
Click [Continue].
The software is installed and then the Installation
Complete message appears.
Click the [Restart] button.
Your Macintosh restarts.
When you start your Macintosh, RICOH Gate La
also starts at the same time.
Page 21
137
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
For Mac OS X 10.1.2 to 10.2.1
Turn on your Macintosh.
Insert the CD-ROM provided into the CDROM drive.
Double-click the CD-ROM icon, and then
open the Mac OS X folder.
The [Caplio Mounter.pkg] icon appears.
Double-click the Mounter icon [Caplio
Mounter.pkg].
The Installer is launched and a screen appears
prompting you for the administrator's password.
Click the key icon.
A verification window appears.
Enter the administrator's name and
password, and then click [OK].
Click [Continue].
The [Select a Destination] screen appears.
Click the destination volume you want, then
click [Continue].
Click [Install].
After the installation has finishes, a message appears
to confirm whether it is necessary to restart your
Macintosh or not.
Click [Continue Installation].
The software is installed, and after a while an
Installation Complete message appears.
Click [Restart].
Your Macintosh restarts.
Page 22
138
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
Uninstalling the Software
(For Mac OS 8.6 to 9.2.2)
To remove (uninstall) the software from your Macintosh, drag and drop the installed file into the Trash.
Please remove the following files from their respective folders.
File Name Folder Name
RICOH Gate La System Folder: Control Panels
RICOH Gate La Prefs System Folder: Preferences
Caplio Mounter System Folder: Extension
Caplio Mounter Prefs System Folder: Preferences
Caplio USB Driver System Folder: Extensions
Uninstalling the Software (For
Mac OS X 10.1.2 to 10.2.1)
When you want to remove the software, follow
the steps below.
Start [Caplio Mounter] in [Application] folder.
Select [Uninstall] in [File] menu.
The software is uninstalled.
Or drag and drop the installation files into the
Trash.
Please remove the following files from their
respective folders.
File Name Folder Name
Caplio Mounter /Application
Caplio Mounter Prefs Home Directory Library/Preferences
CaplioStartup Using the CaplioStartup"Terminal program,
enter 'sudo rm -rf /System/Library/Startupitems/CaplioStartup'
and delete"
Page 23
139
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
Make sure the camera's power is off.
Connect the USB cable to the USB port of
your computer.
Open the terminal cover, and then connect
the USB cable to its USB terminal.
Your camera turns on.
Connecting the Camera to a Computer
After installing the software on your computer, connect your camera to it.
• Disconnecting your camera from computer
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
• When you are downloading images from your camera, the AC Adaptor (sold separately) is recommended.
Page 24
140
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
Downloading methods differ (as described in the following table) depending on the environment used.
Follow the steps in the reference pages to download.
For Mac OS 8.6 to 9.2.2 Download using RICOH Gate La. see p.141
For Mac OS X 10.1.2 to 10.2.1 Download using the Mounter. see p.142
Downloading Pictures to Your Computer
After you have connected your camera to the computer, images downloaded automatically.
Images are downloaded to your computer from the following memory sources.
When no memory card is loaded
Downloads from
internal memory
Downloads from SD
Memory Card
When an SD Memory Card is loaded
For how to change files names when recording, see p.111.
Page 25
141
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
For Mac OS 8.6 to 9.2.2
In Mac OS 8.6, Mac OS 9.1, or earlier versions,
a folder called [Caplio] is created inside the root
directory on the start-up disc [Macintosh HD].
In Mac OS 9.1 to 9.2.2, a folder called [Caplio] is
automatically created inside the [Documents]
folder on the start-up disc [Macintosh HD].
Connect your camera to the computer using
the USB cable.
The camera turns on, RICOH Gate La starts and the
RICOH Gate La window appears.
RICOH Gate La starts and the RICOH Gate La
window appears.
Image Transfer begins automatically.
Click on the [File] menu and select [Quit].
RICOH Gate La closes.
Using the Mounter
You can transfer images using the Mounter.
Connect your camera to the computer using
the USB cable.
Your camera turns on.
When an SD Memory Card is not loaded, the [Caplio]
icon is displayed and you can view the image files
stored in internal memory.
When an SD Memory Card is loaded, the [Caplio.SD]
icon is displayed and you can view the image files
stored on the SD Memory Card loaded.
Double-click the displayed icon.
It can be handled in the same way as a normal drive.
If you double-click the icon, a folder called [DCIM] is
displayed and a folder called [100RICOH] within that
folder is displayed.The image files you shot are inside
the [100RICOH] folder.
Drag and drop the file and then copy to the hard disc.
• If you want to start RICOH Gate La when the camera is not connected, double-click the [RICOH Gate La] icon
in the Control Panel folder, which is inside the System Folder.
• The downloaded images are saved in folders with the date of each shot, inside the [Caplio] folder.
For how to change the Save Destination Folder, see p.144.
Page 26
142
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
For Mac OS X
Connect your camera to the computer using
the USB cable.
Your camera turns on.
When an SD Memory Card is not loaded, the [Caplio]
icon is displayed and you can view the image files
stored in internal memory.
When an SD Memory Card is loaded, the [Caplio.SD]
icon is displayed and you can view the image files
stored on the SD Memory Card loaded.
Double-click the displayed icon.
It can be handled in the same way as a normal drive.
If you double-click the icon, a folder called [DCIM] is
displayed and a folder called [100RICOH] within that
folder is displayed. The image files you shot are inside
the [100RICOH] folder.
Drag and drop the file and copy to the hard disc.
Page 27
143
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
The RICOH Gate La Window
Once RICOH Gate La starts up, the following
RICOH Gate La menu bar and window appear
on the computer screen.
1. [About RICOH Gate]
Displays the version of RICOH Gate La.
2. [Quit]
Closes RICOH Gate La.
3. [Option settings]
Specifies where to save images and which application
will launch if you press the Application button or after
saving. (See p.144.)
[Background illustration]
If you select this, a sub-menu will appear, allowing you
to change the background design of the RICOH Gate
La window.
Sub-menu Figure
4. [Save Button]
Click this and the images download from your
camera.
5. [Application Button]
The application registered in Optional Settings is
launched.
6. [Indicator]
The indicator lights if the camera is connected via
USB cable.
How to Use RICOH Gate La
When you are in the RICOH Gate La
window, you can specify settings for each of the various functions, such as automatically saving when
connected, the destination for downloading images (save destination), and so on.
Page 28
144
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
How to Use Optional Settings
If you select [Optional Settings] from the [RICOH
Gate Settings] menu, the [Optional Settings]
dialog box appears.
Item
Description Initial Setting
① [Automatically save on
connection]
If you check this box, once your camera is connected to
computer, the images are automatically downloaded and
saved.
If you uncheck the box, even when your camera is
connected, your images will not be downloaded
automatically. Click the [Save] button when you want to
download.
Transfer files automatically
② [Choose]
Specifies which folder to save your images in.
For Mac OS 8.6, Mac OS 9.1, or earlier versions, it is in the
[Caplio] folder of the Root Directory on the Start-up disc
[Macintosh HD].
For Mac OS 9.1 to 9.2.2, it is specified in the [Caplio] folder
inside the [Documents] folder on the Start-up disc
[Macintosh HD], so if you want to change it, click the
[Select] button and in the dialog box that appears, select
the folder you wish to specify.
③ [Automatically create
folder on saving]
Specifies how to create a folder.
[Do not Create]
Your downloaded images will all be saved in the folder
specified in item 2.
[For each date photographs]
Creates a new folder assigning the date it was shot as
the folder name, and saves images shot on the same
day in the same folder.
For example, if shot on May 1, 2002: [20020501] folder
[Date Transferred + Number Transferred]
Creates a new folder for each time images are saved
and saves the images shot at the same time in the same
folder.
For example, if saved twice on May 1, 2002:
[20020501_001] folder,
[20020501_002] folder
Each day shot
④ [The same image will not
be saved.]
You can specify this only when you have selected either
[Day Shot] for folder name or if you did not check [Create a
folder automatically when transferring] in [Create a Folder].
If you try to save a file to a folder that has an image file of
the same name, it will not be saved.
Do not save same image
⑤ [Save and start application
software]
If this is checked, an application will be launched after saving. If this is unchecked, no application will be launched.
Do not start application
after transfer
⑥ [Choose]
Specify the name of the application you want to launch after
you save. Click the [Choose] button to display the dialog
box, and then specify which application to use.
Page 29
Section 3 Displaying Thumbnail Images
(How to Use DU-10)
DU-10 enables you to view downloaded images at a glance–as
well as edit, rotate and resave images.
This section explains how to use DU-10.
• DU-10 can only be used in Windows.
Page 30
146
Chapter 2 / Section 3 Displaying Thumbnail Images (How to Use DU-10)
DU-10 Window
Once you start DU-10, a window like the
following appears.
The images you saved are displayed all in one
window. This method of displaying reduced size
images is called thumbnail display.
Exiting DU-10
To exit DU-10 and close its window, select [File]
from the menu bar, then select [Exit] from the
menu displayed, or click the [×] (Close) button in
the upper-right corner of the screen.
Starting and Exiting DU-10
There are two methods of starting DU-10:
• Auto Start from RICOH Gate La
In the RICOH Gate La option settings, if the Application Software is set to DU-10, and if [After saving,
launch Application software] is checked, DU-10 will start automatically after image files have
downloaded from your camera with RICOH Gate La.
• Start from Windows [Start] menu
If you select [Program] then [Caplio Software] then [DU-10] from the [Start] menu, you can start DU-
10.
For how to set DU-10 to not launch automatically, see p.129.
Page 31
147
Chapter 2 / Section 3 Displaying Thumbnail Images (How to Use DU-10)
Once you start DU-10, images appear as
thumbnails.
1. Menu Bar
You can change the display size and ordering of
images.
2. Tool Bar
Of the functions available in the menu, the icons of
those most frequently used are displayed, so you can
use those functions with just one simple click.
3. The Thumbnail Display Area
The reduced images are displayed at one glance.
4. Folder Display Area
The folders inside [My Computer] are displayed in a
hierarchy. The images inside folders selected here
appear in the Thumbnail Display Area.
5. Thumbnail Image
6. File Name
7. Sound Setting Y/N Display
8. Memo Setting Y/N Display
Memos cannot be added using this software.
Thumbnail Display Description
Page 32
148
Chapter 2 / Section 3 Displaying Thumbnail Images (How to Use DU-10)
To change the ordering of images, use either the
tool bar or [Arrange] from the [View] menu.
Menu
Tool Bar
1. Name order
Switches to By File Name.
2. Type order
Switches to By File Type (in alphabetical order of the
extension).
3. Date order
Switches to By Date Shot.
4. Ascending / 5. Descending
Ascending order is going from small to large, the
opposite is descending order. For the alphabet, a,b,c
is ascending order, and z,y,x is descending.
Select which order to use, 1, 2 or 3 and choose either
ascending or descending order.
Switching the Ordering of Images
Displayed thumbnail images are ordered according to date (descending order).
You can change the ordering method to by file type or by name. You can also choose whether each of
the above is ordered according to ascending or descending order.
• If you order by file type, the files are ordered alphabetically according to the file extension.
Page 33
149
Chapter 2 / Section 3 Displaying Thumbnail Images (How to Use DU-10)
To change the display size, use either the tool
bar or [Display size] from the [View] menu.
You can change the display size to one of five
sizes available.
1. Extra-large
2. Large
3. Medium
4. Medium+
5. Small
Changing the Display Size
memo
Page 34
150
Chapter 2 / Section 3 Displaying Thumbnail Images (How to Use DU-10)
To View a slide show
You can select one or more images and display
them as a slide show.
To start slide show, follow the steps below.
Select the images you wish to see in slide
show.
If you want to select multiple consecutive images,
after clicking the first image, press and hold the [Shift]
key and click the last image.
To select multiple images that are not consecutive,
press and hold the [Ctrl] while clicking each.
Using one of the steps below, select [slide
show].
• Select [Image] then [slide show] from the menu bar.
• Place the pointer of the mouse on one of the images
you selected, right click and choose [slide show]
from the menu.
Menu
Shortcut menu displayed with right click
The [slide show] dialog box is displayed, so
make the necessary settings.
Click the [Run] button.
The slide show begins.
TRunning a slide show
Type of slide
show
Key Action
[AUTO] is
selected in step
3
[ESC] Key Stops the slide
show.
[MANUAL] is
selected in step
3
[ESC] Key Stops the slide
show.
Left-click Mouse
[Space] Key
[Enter] Key
[→] Key
The next image is
displayed.
[Backspace] Key
[←] Key
The previous
image is
displayed.
Viewing Images in a slide show
You can view images sequentially and automatically in either a slide show (selected images only) or
auto slide show (all images).
Page 35
151
Chapter 2 / Section 3 Displaying Thumbnail Image (How to Use DU-10)
Using Auto slide show
In Auto slide show, all the images displayed as
thumbnails appear in order.
To start Auto slide show, follow the steps below.
Using one of the steps below, select [Auto
slide show].
• Select [Image] then [slide show] from the menu bar.
• Click the button on the tool bar.
• Place the pointer of the mouse on one of the images
you selected, right click and choose [Auto-slide
show] from the menu.
The slide show begins.
The images advance automatically according to the
display interval (number of seconds) you specified in the
[slide show] dialog box.
Stop the slide show with the [Esc] Key.
How to Use the slide show
Dialog Box
You can make slide show display settings in the
[slide show] dialog box.
1. [Operating method]
Select either Auto slide show (the slides are played
automatically, in order) or Manual (switch frames by
clicking the mouse button or pressing the [Enter] key).
2. [Display interval]
Specify how long in seconds to display each image,
when using Auto slide show.
3. [Background color]
Choose a background color for your images. Click the
[Choose Color] button and choose a color from the
dialog box that appears.
4. [Display file name]
If you check this box, the file name will appear in the
bottom of the image.
5. [Maximum display]
If you check this box, your images will be displayed at
full-screen size.
6. [Playback sound]
If you check this box, and the images have associated
sounds, the sounds will also be played back.
7. [Repeat]
If you check this box, the sets of images will be shown
repeatedly, until you press the [Esc] key to stop. If you
uncheck this box, the images in the folder will be
displayed through the cycle once, then the slide show
will finish.
Page 36
152
Chapter 2 / Section 3 Displaying Thumbnail Images (How to Use DU-10)
You can display image information, such as the
date and time a photo was shot, the size of the
image, and so on.
Information Dialog Box
To display image information, follow one of the
steps below.
Using the File Menu
Click the image in the Thumbnail Display
Area for which you want to see information.
Select [Properties] from the [File] menu.
Using the Shortcut Menu
Right-click on the image in the Thumbnail
Display Area.
The menu appears.
Select [Properties] from the menu.
Viewing Image Information
Page 37
153
Chapter 2 / Section 3 Displaying Thumbnail Images (How to Use DU-10)
Viewer Screen
Viewer Screen
① Menu Bar
② Tool Bar
[Save]
Overwrites an image and saves.
[Rotate 90° counter-clockwise]
[Rotate 90° clockwise]
You can rotate your images 90 degrees to the left or right.
You can correct images to their proper vertical/horizontal
orientation.
[Enlarged display]
[Actual size view]
[Reduce display]
[Overall view]
You can enlarge or reduce the displayed size.
By repeating [Enlarge Display], you can enlarge the view
up to 16 times over original size.
By repeating [Reduce Display], you can reduce the view
down to 1/16th of original size.
Displaying the Viewer Screen
If you use the Viewer screen, images are not displayed as thumbnails, so you can view them at full
size. To open the Viewer screen, follow one of the steps below.
• Double click the image you want to display from the thumbnail selection.
• Click the image you want to display from the thumbnail display area, then select [Display/Playback]
from the [Image] menu.
Saving under a New File Name:
When you want to create a duplicate,
or after rotating an image and changing
its orientation, if you want to make it
into a different file, you can save it and
attach a new, different file name.
The only file format you can save in is
TIFF.
To save under a new file name, follow
the steps below.
Select [Save as...] from the [File]
menu.
The [Save As] dialog box appears.
Specify where to save the new file
[Save in].
Enter the name of the new file in
[File Name].
Click [Save].
TIFF File
This is read "tiff" file. This is a format used
when saving image data as a file. With G3,
images (still images) are saved as files in the
small JPEG (jay-peg) file format. TIFF file sizes
are larger than JPEG files, but if you want to
make frequent changes and resave, TIFF files
prevent deterioration.
Loading...