Page 1
AR-B1045 User’s Guide
AR-B1045
Dual PCMCIA SLOT
PC/104 PLUS SBC
Edition: 1.0
Book Number: AR-B1045-06.1.19
AR-B1045
Page 2
AR-B1045 User’s Guide
@Copyright 2006
All Rights Reserved.
Manual first edition Jan 19, 2006
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does not
represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability
to use the product or documentation, even if advised of the possibility of
such damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by
any mechanical, electronic, or other means in any form without prior
written permission of the manufacturer.
Trademarks
AR-B1045 is registered trademarks X-Fire Acrosser Inc, IBM PC is a
registered trademark of International Business Machines Corporation.
Pentium is a registered trademark of Intel Technologies, Inc. Award is
registered trademarks of Award Software International, Inc. Other
product names mentioned herein are used for identification purposes
only and may be trademarks and/or registered trademarks of their
respective companies.
AR-B1045
2
Page 3
AR-B1045 User’s Guide
Contents
Contents............................................................... 3
Introduction............................................................ 4
1.1 Specifications:........................................................................4
1.2 What You Have ......................................................................4
Installation ............................................................. 5
2.1 AR-B1045’s Layout.................................................................5
2.2 Operation mode selection.......................................................7
2.3 Voltage selection....................................................................7
Connection ............................................................ 8
3.1 CardBus connector..................................................................8
3.2 PCI Bus Connector..................................................................9
AR-B1045
3
Page 4
1
AR-B1045 User’s Guide
Introduction
The PM-1045 is PC/104-Plus interface card with standard
industrial mechanical dimension. It is equipped with a high
performance 32-bit PCI bus Interface to CardBus interface
chipset (Ricoh R5C486), which can support the 32-bit CardBus
(Card-32), and the 16-bit CardBus (Card-16). It supports dual
PCMCIA slots. The upper slot is slot one; the lower is slot two.
1.1 Specifications:
2 PCMCIA PC-Card 95/97 sockets. (Two type I & type II cards or one
•
type III card)
CardBus (Card-32) Card and 16-bit (PCMCIA2.1/JEIDA4.2)Card are
•
available simultaneously.
PCI Bus Interface.
•
PCI signals <Interrupt, IDSEL, Clock, REQ, GNT are selectable>
•
Socket voltage control. (5V,3V auto-detect)
•
1.2 What You Have
In addition to this User's Manual, the AR-B1045 package includes the
following items:
AR-B1045 board
•
User Manual
•
AR-B1045
4
Page 5
AR-B1045 User’s Guide
2
Installation
This chapter describes how to install the AR-B1045. At first, the
layout of AR-B1045 is shown, and the unpacking information that you
should be careful is described. The jumpers and switches setting for
the AR-B1045’s configuration
2.1 AR-B1045’s Layout
Top Placement
AR-B1045
5
Page 6
AR-B1045 User’s Guide
Bottom Placement
AR-B1045
6
Page 7
2.2 Operation mode selection
J1 : jumper setting
•
Pin DESCRIPTION
1-2,3-4 open Mode 0
1-2 open,3-4 short
1-2 short,3-4 open
1-2,3-4 short Mode 3
Operation mode description
•
Mode 1
Mode 2
AR-B1045 User’s Guide
Mode 0 PCICLK0 AD20
Mode 1 PCICLK1 AD21
Mode 2 PCICLK2 AD22
Mode 3 PCICLK3 AD23
PCICLK IDSEL INT 0 INT 1 REQ GNT
A B REQ0 GNT0
B C REQ1 GNT1
C D REQ2 GNT2
D A REQ3 GNT3
2.3 Voltage selection
JP1 : Chip Voltage selection
•
PIN DESCRIPTION
1-2 +3.3V
2-3 +2.5V
Note: RICOH R5C486 ->2.5V，R5C586 -> 3.3V
AR-B1045
7
Page 8
AR-B1045 User’s Guide
3
Connection
3.1 CardBus connector
The AR-B1045 provides a CardBus interface for CardBus
devices and PCMCIA devices.
SLOT1 : CardBus Conncetor
PIN DESCRIPTION PIN DESCRIPTION
1 GND 2 D3
3 D4 4 D5
5 D6 6 D7
7 CE1# 8 A10
9 OE# 10
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
A9 12
A13 14
WE# 16
VCC 18
A16 20
A12 22
A6 24
A4 26
A2 28
A0 30
D1 32
WP 34
GND 36
D11 38
D13 40
D15 42
VS1# 44
IOWR# 46
A18 48
A20 50
A11
A8
A14
READY
VCC
A15
A7
A5
A3
A1
D0
D2
GND
CD1#
D12
D14
CE2#
IORD#
A17
A19
A21
AR-B1045
8
Page 9
AR-B1045 User’s Guide
51
53
55
57
59
61
63
65
67
VCC 52
A22 54
A24 56
VS2# 58
WAIT# 60
REG# 62
BVD1 64
D9 66
CD2# 68
VCC
A23
A25
RESET
INPACK#
BVD2
D8
D10
GND
3.2 PCI Bus Connector
• CN3 : PCI Bus connector
PIN define PIN define PIN define PIN define
A1 GND B1 SIRQ C1 +5V D1 AD00
A2 VIO B2 AD02 C2 AD01 D2 +5V
A3 AD05 B3 GND C3 AD04 D3 AD03
A4 CBE0# B4 AD07 C4 GND D4 AD06
A5 GND B5 AD09 C5 AD08 D5 GND
A6 AD11 B6 VIO C6 AD10 D6 M66EN
A7 AD14 B7 AD13 C7 GND D7 AD12
A8 3.3V B8 CBE1#
A9 SERR# B9 GND C9 SB0 D9 PAR
A10
A11 STOP# B11
A12
A13 FRAME# B13
A14
A15
A16
A17
A18 IDSEL0 B18
A19
A20
A21
A22
A23 REQ0# B23
A24
A25 GNT1# B25
A26
A27 PCICLK2 B27
A28
A29
A30
GND B10 PERR# C10 +3.3V D10 SDONE
3.3V B12 TRDY# C12 GND D12 DEVDEL#
GND B14 AD16 C14 +3.3V D14 CBE2#
AD18 B15 +3.3V C15 AD17 D15 GND
AD21 B16 AD20 C16 GND D16 AD19
3.3V B17
AD24 B19 CBE3#
GND B20 AD26 C20 AD25 D20 GND
AD29 B21
+5V B22
GND B24 REQ2# C24 +5V D24 GNT0#
+5V B26 PCICLK0 C26 GND D26 PCICLK1
GND B28 INTD# C28 +5V D28 RST#
+12V B29 INTA# C29 INTB# D29 INTC#
-12V B30 REQ3# C30 GNT3# D30 GND
+3.3V C11 LOCK# D11 GND
GND C13 IRDY# D13 +3.3V
AD23 C17 AD22 D17 +3.3V
GND C18 IDSEL1 D18 IDSEL2
+5V C21 AD28 D21 AD22
AD30 C22 GND D22 AD31
GND C23 REQ1# D23 VIO
VIO C25 GNT2#
+5V C27 PCICLK3 D27 GND
C8 AD15 D8 +3.3V
C19 VIO D19 IDSEL3
D25 GND
AR-B1045
9
Loading...