Ricoh AP4510 Part List
G065
PARTS CATALOG
RICOH GROUP COMPANIES
001270MIU
PARTS CATALOG
G065
®
®
RICOH GROUP COMPANIES
G065
PARTS CATALOG
001270MIU
It is the reader's responsibility when discussing the information contained within this
document to maintain a level of confidentiality that is in the best interest of Ricoh
Corporation and its member companies.
NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY
FASHION AND DISTRIBUTED WITHOUT THE PRIOR
PERMISSION OF RICOH CORPORATION.
All product names, domain names or product illustrations, including desktop images,
used in this document are trademarks, registered trademarks or the property of their
respective companies.
They are used throughout this book in an informational or editorial fashion only and for
the benefit of such companies. No such use, or the use of any trade name, or web
site is intended to convey endorsement or other affiliation with Ricoh products.
2001 RICOH Corporation. All rights reserved.
LEGEND
PRODUCT CODE COMPANY
GESTETNER LANIER RICOH SAVIN
G065 P7145 2145 Aficio AP4510 MLP45
G520 Paper Tray PS430
A683 Large Capacity Tray RT36
A681 Finisher SR720
A697 Finisher SR730
A812 Punch Kit type 450
G909/G912 CS360/Bridge Unit Type 460
B397 Bridge Unit Type 1045
DOCUMENTATION HISTORY
REV. NO. DATE COMMENTS
* 12/2001 Original Printing
G065 PARTS CATALOG
TABLE OF CONTENTS
G065 PARTS LOCATION AND LIST
1.EXTERIOR 1 (G065) ........................................... 2
2.EXTERIOR 2 (G065) ........................................... 4
3.LASER UNIT (G065) ........................................... 6
4.BY-PASS FEED SECTION 1 (G065) .................. 8
5.BY-PASS FEED SECTION 2 (G065) ................. 10
6.PAPER REGISTRATION 1 (G065) .................... 12
7.PAPER REGISTRATION 2 (G065) .................... 14
8.PAPER TRAY UNIT (G065) ............................... 16
9.TONER HOPPER UNIT (G065) ......................... 18
10.PCU UNIT 1 (G065)........................................... 20
11.PCU UNIT 2 (G065)........................................... 22
12.TRANSFER UNIT 1 (G065)............................... 24
13.TRANSFER UNIT 2 (G065)............................... 26
14.DEVELOPMENT UNIT (G065) .......................... 28
15.FUSING UNIT (G065)........................................ 30
16.PAPER SEPARATION 1 (G065) ....................... 32
17.PAPER SEPARATION 2 (G065) ....................... 34
18.DUPLEX UNIT 1 (G065).................................... 36
19.DUPLEX UNIT 2 (G065).................................... 38
20.DUPLEX UNIT 3 (G065).................................... 40
21.DRIVE SECTION 1 (G065)................................ 42
22.DRIVE SECTION 2 (G065)................................ 44
23.DRIVE SECTION 3 (G065)................................ 46
24.ELECTRICAL SECTION 1 (G065) .................... 48
25.ELECTRICAL SECTION 2 (G065) .................... 50
26.FRAME SECTION 1 (G065) .............................. 52
27.FRAME SECTION 2 (G065) .............................. 54
28.EXPANSION BOX/HDD (G065/G334) ............... 56
29.IOB BOARD (G065) ........................................... 58
30.BICU BOARD (G065)......................................... 60
31.CONTROLLER BOARD (G065)......................... 62
32.DECAL AND DOCUMENT (G065)..................... 64
33.SPECIAL TOOLS (G065)................................... 66
G065 PARTS INDEX
PARTS INDEX .......................................................... 2
PAPER TRAY UNIT G520 PARTS LOCATION AND
LIST
1.EXTERIOR (G520)............................................... 2
2.PAPER TRAY (G520) .......................................... 4
3.PAPR REGISTRATION (G520) ........................... 6
4.DDRIVE SECTION (G520)................................... 8
5.DRIVE AND ELECTRICAL SECTION (G520) .... 10
PAPER TRAY UNIT G520 PARTS INDEX
PARTS INDEX .......................................................... 2
LARGE CAPACITY TRAY A683 PARTS LOCATION
AND LIST
1.EXTERIOR (A683) ............................................... 2
2.PAPER REGISTRATION (A683)......................... 4
3.PAPER TRAY (A683) .......................................... 6
4.FRAME SECTION (A683) ................................... 8
5.DRIVE AND ELECTRICAL SECTION (A683) .... 10
LARGE CAPACITY TRAY A683 PARTS
PARTS INDEX.......................................................... 2
FINISHER A681 PARTS LOCATION AND LIST
LOCATION OF UNIT ................................................ 2
1.EXTERIOR (A681)............................................... 4
2.STAPLE TRAY 1 (A681)...................................... 6
3.STAPLE TRAY 2 (A681)...................................... 8
4.TRAY DRIVE SECTION (A681) ......................... 10
5.TRANSPORT SECTION 1 (A681)...................... 12
6.TRANSPORT SECTION 2 (A681)...................... 14
7.DRIVE SECTION (A681) .................................... 16
8.ELECTRICAL SECTION (A681)......................... 18
9.DECAL AND DOCUMENT (A681)...................... 20
FINISHER A681 PARTS INDEX
PARTS INDEX.......................................................... 2
PUNCH KIT TYPE 450 A697PARTS LOCATION AND
LIST
LOCATION OF UNIT................................................ 2
1.EXTERIOR (A697)............................................... 6
2.STAPLE TRANSPORT 1 (A697) ......................... 8
3.STAPLE TRANSPORT 2 (A697) ........................ 10
4.STAPLE TRAY 1 (A697)..................................... 12
5.STAPLE TRAY 2 (A697)..................................... 14
6.STAPLER UNIT (A697) ...................................... 16
7.TRANSPORT SECTION 1 (A697)...................... 18
8.TRANSPORT SECTION 2 (A697) ...................... 20
9.PUNCH UNIT (A697) .......................................... 22
10.PAPER EXIT SECTION 1 (A697) ...................... 24
11.PAPER EXIT SECTION 2 (A697) ...................... 26
12.FRAME SECTION (A697).................................. 28
13.DRIVE SECTION (A697) ................................... 30
14.ELECTRICAL SECTION (A697) ........................ 32
15.DECAL AND DOCUMENT (A697)..................... 34
PUNCH KIT TYPE 450 A697PARTS INDEX
PARTS INDEX .......................................................... 2
MAIL BOX UNIT G909/BRIDGE UNIT G912 PARTS
LOCATION AND LIST
1.MAIL BOX 1 (G909) ............................................. 2
2.MAIL BOX 2 (G909) ............................................. 4
3.MAIL BOX 3 (G909) ............................................. 6
4.MAIL BOX 4 (G909) ............................................. 8
5.MAIL BOX 5 (G909) ............................................ 10
6.MAIL BOX 6 (G909) ............................................ 12
7.BRIDGE UNIT (G912)......................................... 14
MAIL BOX UNIT G909/BRIDGE UNIT G912 PARTS
INDEX
PARTS INDEX .......................................................... 2
BRIDGE UNIT B397 PARTS LOCATION AND LIST
1.BRIDGE UNIT 1 (B397) ....................................... 2
2.BRIDGE UNIT 2 (B397) ....................................... 4
BRIDGE UNIT B397 PARTS INDEX
PARTS INDEX .......................................................... 2
G065
PARTS LOCATION AND LIST
This section instructs you as to the numbers and names of parts on this machine.
1.EXTERIOR 1 (G065)
G065 2 Parts Location and List
1.EXTERIOR 1 (G065)
Index
No.
1 A230 1268 Upper Cover - Paper Feed 1
2 B004 1261 Front Cover Ass'y 1
3 G035 1382 Decal - Postscript 1
4 AA00 1389 Large Decal - Energy Star 1
5 G020 1332 Hinge - Front Cover 2
6 G065 1385 Operation Instruction Sheet 1
7 B004 1285 Left Cover-paper Feed Sub-unit 1
8 A232 1286 Stopper - Plate 1
9 B004 1281 Left Cover 1
10 G065 1383 Decal - Left - Adonis-P 2
11 G065 1283 Cover-left Rear 1
12 A232 2724 Knob Cover 1
13 A232 2720 Gear Bracket 1
14 A232 2722 Knob 1
15 AA04 3416 Timing Belt - 40S3M192 1
16 AB03 0584 Timing Pulley - 15T 1
17 AB03 0564 Pulley - M17 1
18 A232 2723 Support Plate - Knob 1
19 A232 1272 Right Rear Cover 1
20 A232 2857 Cover - Vertical Transport 1
21 AG07 0014 Magnet Catch 1
22 AA00 1392 Decal - A1 1
23 A232 2860 Entrance Seal 1
24 A232 2858 Upper Support Plate 1
25 A232 2859 Lower Support Plate 1
26 A232 5838 Spring Plate - BICU 1
27 AA06 3563 Spring 2
28 AA08 0254 Bushing - M4 4
29 A232 2862 Driven Roller 2
30 AF02 0409 Driven Roller 2
31 AA00 0204 Decal - Right Lower Cover 1
32 A232 2876 Lower Cover - Vertical Transport 1
33 5206 2686 Snap Ring 1
34 A232 2863 Stopper Band 1
35 AA06 3564 Tension Spring 2
Part No.
Description
Q’ty Per
Assembly
Index
No.
101 0451 3008H Tapping Screw - M3x8
102 0450 3012B Tapping Screw -3x12
103 0451 3006B Tapping Screw - M3x6
104 0720 0060E Retaining Ring - M6
105 0720 0030E Retaining Ring - M3
106 0450 3008B Tapping Screw - M3x8
Part No.
Description
Q’ty Per
Assembly
G065 3 Parts Location and List
2.EXTERIOR 2 (G065)
G065 4 Parts Location and List
2.EXTERIOR 2 (G065)
Index
Index
No.
No.
1 A232 4497 End Fence - Copy Tray 1
2 B004 4436 Copy Tray Guide 1
3 B004 4435 Sub Copy Tray 1
4 G034 4231 Flanged Hexagonal Head Bolt - M3x8 2
5 B007 4491 Paper Sensor 1
6 A232 1284 Spring Holder 1
7 B004 1297 Rear Cover - Paper Feed Sub-unit 1
8 B004 1296 Rear Cover - Paper Feed Sub-unit 1
9 B004 7222 CSS Cover 1
10 G034 4497 Holder - Sensor Harness 1
11 G034 1413 Bracket - Operation Sub Unit 1
12 G034 1250 Cover - Upper 1
13 A232 1257 Cap - Upper Cover 1
14 A232 4499 Copy Tray Mylar 1
15 B004 4440 Middle Guide - Paper Exit 1
16 A232 1258 Cap - IC Card 1
17 A176 1317 Cap - 34x55 2
18 AA15 0685 Seal - 215x10 1
19 G034 2993 Flanged Hexagonal Head Bolt - M3x6 1
20 G034 1253 Cover - Small - Upper Right 1
21 G065 1173 Sheet - Duct 1
22 AA15 3390 Sponge - 202x3.5x4 1
23 A232 1252 Duct - Upper Cover 1
24 A232 1381 Decal - Total Counter 1
25 A284 1376 Inner Cover-left 1
26 AG07 1010 Magnet Catch 2
27 A284 1372 Inner Cover-upper 1
28 G065 1503 Operation Panel - NA 1
28 G065 1513 Operation Panel - EU 1
29 G065 1540 Harness - Operation Panel 1
30 G065 1583 Seal - Top Cover - Harness 1
31 G065 1582 Seal - Top Cover 1
32 G065 1581 Sheet - Top Cover 1
33 G065 1504 Top Cover 1
34 G034 1384 Decal - Paper Jam 1
Part No.
Part No.
Description
Description
Q’ty Per
Q’ty Per
Assembly
Assembly
Index
Index
No.
No.
35 A176 1318 Cap - 16 1
36 B004 1291 Rear Cover 1
37 G065 1174 Sheet - Duct - Upper 1
101 0450 3006B Tapping Screw - M3x6
102 0451 3008H Tapping Screw - M3x8
103 1105 0487 Harness Clamp
104 0450 3008H Tapping Screw - M3x8
105 0450 4010B Tapping Screw - 4x10
106 0451 3006B Tapping Screw - M3x6
Part No.
Part No.
Description
Description
Q’ty Per
Q’ty Per
Assembly
Assembly
G065 5 Parts Location and List
3.LASER UNIT (G065)
G065 6 Parts Location and List
3.LASER UNIT (G065)
Index
No.
1 B004 1873 Optical Housing Unit (NA) 1
1 B004 1877 Optical Housing Unit (EU) 1
2 A284 1904 Cover - Optical Housing 1
3 G065 5291 Harness - LD Unit 1
4 A232 1900 Housing - Laser Unit 1
5 A293 5310 Sync Detector Board 1
6 G029 1980 Decal - LD 1
7 A232 1904 Cap - Laser Unit Cover 1
8 A232 1971 Support Cover - Imaging Unit 1
9 AC01 5025 Shield Glass 1
10 A232 5444 Harness - Laser Unit 1
11 B004 1891 LD Unit 1
12 AX06 0180 Polygon Mirror Motor - DC 17W 1
13 A232 1918 Heat Sink - Polygon Motor 1
14 A232 1920 Decal - Heat Sink 1
15 A232 1927 Cylindrical Lens Holder 1
16 G020 1966 Cylindrical Lens 1
17 AC01 5024 Shield Glass - Polygon Motor 1
18 A232 1926 Mirror Holder 2
19 A232 1925 Middle Mirror Holder 1
20 AC03 0115 Mirror 1
21 A232 1923 Front Holder - BTL 1
22 A232 1924 Rear Holder - BTL 1
23 G020 1969 BTL Lens 1
24 A232 1921 Front Holder - F Theta Mirror 1
25 A232 1922 Rear Holder - F Theta Mirror 1
26 G020 1968 F Theta Mirror 1
27 GC03 0020 Sync. Detector Mirror 1
28 A232 1928 Holder - Sync. Detector Mirror 1
Part No.
Description
Q’ty Per
Assembly
Index
No.
101 0450 3008B Tapping Screw - M3x8
102 0951 3008B Philips Screw With Flat Washer - M3x8
103 0450 3010B Tapping Screw - M3x10
Part No.
Description
Q’ty Per
Assembly
G065 7 Parts Location and List
4.BY-PASS FEED SECTION 1 (G065)
G065 8 Parts Location and List
4.BY-PASS FEED SECTION 1 (G065)
Index
No.
1 A232 6106 Middle Lower Cover 1
2 A232 6095 Frame By-pass Unit Holder 1
3 A232 6109 Front Cover - By-pass Unit 1
4 A232 6108 Rear Cover - By-pass Unit 1
5 A232 6107 Middle Upper Cover 1
6 A232 6090 Bracket Positioning Pin 1
7 A232 6091 Positioning Pin 1
8 AA08 2070 Bushing - 8x16x7 1
9 AA06 6574 Torsion Spring 1
10 A232 6067 By-pass Feed Table 1
11 A232 6068 Cover By-pass Table 1
12 A232 6082 Front Rack 1
13 G011 3305 Gear - 16T 1
14 A232 6083 Rear Rack 1
15 A232 6080 Paper Size Detector 1
16 A232 6073 Decal - By-pass Feed 1
17 A232 6085 Guide By-pass Table 1
18 A232 6092 Roller - Holder 1
19 A232 6070 Rear Side Fence 1
20 A232 6072 Sub - Rear Fence 1
21 A232 6069 Front Side Fence 1
22 A232 6071 Sub - Front Fence 1
23 AF04 0559 Driven Roller - M9 1
24 A232 6009 By-pass Feed Table Ass'y 1
Part No.
Description
Q’ty Per
Assembly
Index
No.
101 0451 3008H Tapping Screw - M3x8
102 1105 0349 Edge Saddle
103 0720 0060E Retaining Ring - M6
104 0451 3008B Tapping Screw - M3x8
105 0451 4010B Tapping Screw - 4x10
Part No.
Description
Q’ty Per
Assembly
G065 9 Parts Location and List
5.BY-PASS FEED SECTION 2 (G065)
Rev. 02/04/2003
G065 10 Parts Location and List
5.BY-PASS FEED SECTION 2 (G065)
Index
Index
No.
No.
1 5447 2681 Snap Ring 3
2 AF03 2036 Separation Roller 1
3 A284 2783 Torque Limiter 1
4 A232 6033 Shaft Driven Roller 1
5 AA06 3499 Pressure Spring 1
6 AF01 3016 Bottom Plate Pad 1
7 AB01 1389 Gear - 20Z 1
8 AB01 1388 Gear - Z16 1
9 A232 6035 Shaft - Drive Roller 1
10 A232 6028 Guide Plate Paper Separator 1
11 A232 6038 Gear Cover 1
12 A134 2843 Spacer 6x30x1.5 2
13 A232 6022 Housing - By-pass Feed 1
14 5216 4198 Stepped Screw - Guide Plate 4
15 A232 6023 Grounding Plate - Reverse 1
16 A232 6055 Paper End Feeler 1
17 A134 2661 Feeler Roller 1
18 AF04 0031 Driven Roller 2
19 AW02 0056 Photointerruptor - Ee-sx4235a-p1 1
20 A232 6043 Arm Paper Pick Up 1
21 AA14 0753 Feed Shaft 1
22 AF03 0036 Pick Up Roller 1
23 AB01 1387 Gear - 23Z 1
24 A232 6044 Support Plate 1
25 A232 6046 Grounding Plate - Feed 1
26 AA06 3568 Pressure Spring 1
27 A232 6051 Pickup Solenoid 1
28 A232 5427 Harness By-pass Feed 1
29 AA06 3567 Tension Spring 1
30 AA08 3010 Clutch Roller - 6x14x10 1
31 AX20 0140 Electrical Clutch 1
32 AB01 7454 Gear - 24Z/30Z 1
33 A232 6059 Arm Tightener 1
34 AB01 1390 Gear - 27Z 1
35 GA08 0002 Bushing - 6mm 1
Part No.
Part No.
Description
Description
Q’ty Per
Q’ty Per
Assembly
Assembly
Rev. 02/04/2003
Index
Index
No.
No.
36 AA06 3569 Spring 1
37 A232 6049 Solenoid Bracket 1
38 G065 6801 Tightener Bracket 1
39 G065 6802 Rail - By-pass Feed 1
40 AF03 1036 Feed Roller 1
41 G065 6800 Bracket-by-pass Feed Drive 1
42 B004 6062 Pressure Plate 1
43 AF04 0575 Driven Roller 1
101 0451 3008B Tapping Screw - M3x8
102 GA08 0002 Bushing - 6mm
103 0720 0040E Retaining Ring - M4
104 1105 0267 Harness Clamp - YMC-10-0
105 0353 0040B Screw - M3X4
106 0450 3008B Tapping Screw - M3x8
Part No.
Part No.
Description
Description
Q’ty Per
Q’ty Per
Assembly
Assembly
G065 11 Parts Location and List
6.PAPER REGISTRATION 1 (G065)
G065 12 Parts Location and List
6.PAPER REGISTRATION 1 (G065)
Index
Index
No.
No.
1 A232 2785 Vertical Guide 1
2 A232 2786 Guide Plate 1
3 A232 2787 Vertical Transport Guide 1
4 AB01 4090 Gear - 18Z 1
5 G065 2750 Paper Feed Unit 1
6 AF03 0034 Pick-up Roller 1
7 AB01 1188 Gear - 21Z 1
8 5447 2681 Snap Ring 2
9 AF03 1035 Feed Roller 1
10 AB01 1189 Gear - 18Z 1
11 AA08 2070 Bushing - 8x16x7 1
12 A232 2763 Pick-up Arm 1
13 AA06 0691 Tension Spring 1
14 A232 2781 Sensor Bracket 1
15 AW02 0096 Photointerruptor 1
16 A232 2780 Stay - Paper Feed 1
17 AF02 0404 Transport Roller 1
18 A232 2760 Housing - Paper Feed Unit 1
19 AW02 0056 Photointerruptor - EE-SX4235A-P1 2
20 A232 5428 Harness - Paper Feed Unit 1
21 AA14 0655 Shaft - Paper Feed 1
22 G065 2767 Lever - Feed 1
23 A232 2764 Rear Grounding Plate 1
24 AA08 2072 Bushing - M6 3
25 A232 2766 Feed Mylar 1
26 A232 2762 Paper End Feeler 1
27 A232 2765 Front Grounding Plate 1
28 AA14 0656 Shaft - Gear 1
29 AF03 2035 Separation Roller 1
30 B004 2783 Torque Limiter 1
31 B004 2777 Shaft - Paper Separation 1
32 B004 2770 Stay - Paper Separation 1
33 5206 2686 Snap Ring 2
34 AA06 0693 Tension Spring 1
35 G065 2774 Pressure Lever 1
Part No.
Part No.
Description
Description
Q’ty Per
Q’ty Per
Assembly
Assembly
Index
Index
No.
No.
36 AB01 0106 Gear - 24Z 1
37 AB01 0107 Gear - 23Z 1
38 AA06 0908 Release Spring 1
39 G065 2775 Link Lever 1
40 B004 2782 Rear Feed Mylar 1
41 G065 2776 Release Lever 1
101 0450 3008B Tapping Screw - M3x8
102 0451 3008B Tapping Screw - M3x8
103 1105 0283 Clamp
104 0720 0060E Retaining Ring - M6
105 0720 0040E Retaining Ring - M4
106 0805 0089 Retaining Ring - M4
107 0805 3480 Bushing - 6mm
Part No.
Part No.
Description
Description
Q’ty Per
Q’ty Per
Assembly
Assembly
G065 13 Parts Location and List
7.PAPER REGISTRATION 2 (G065)
G065 14 Parts Location and List
7.PAPER REGISTRATION 2 (G065)
Index
No.
1 AG05 0085 Registration Roller Knob 1
2 AB01 3485 Gear - 20Z 1
3 AA08 2080 Bushing - M8 2
4 AB01 4051 Gear - 16Z 1
5 AA08 0229 Front Busing - M6 1
6 AA06 2304 Pressure Spring 2
7 A232 2578 Stopper - Guide Plate 2
8 AA06 6577 Torsion Spring 1
9 A232 3985 Link - Cover 1
10 AA14 9291 Pin - Link 1
11 A232 2596 Link Lever 1
12 5206 2686 Snap Ring 1
13 G065 2403 Supporter - PCU 1
14 B004 2310 Spur 7
15 G065 2406 Holder - ID Sensor 1
16 A232 2367 ID Sensor 1
17 A232 1284 Spring Holder 1
18 A232 1072 Lower Stay - PCU 1
19 AA15 3442 Shield - Stay - PCU 1
20 AF02 0410 Registration Roller 1
21 AF02 1059 Driven Registration Roller 1
22 AA06 2305 Tension Spring 1
23 AA00 1393 Decal - A2 1
24 B004 2575 Knob - Entrance Guide 1
25 A232 2574 Upper Entrance Guide 1
26 A232 2583 Lower Entrance Guide 1
27 A232 2594 Bracket - Registration Sensor 1
28 AW01 0048 Photosensor - GP2A28N1 1
29 A232 5420 Harness - Registration Sensor 1
30 AD02 1127 Receptacle 1
31 AA06 3304 Terminal Spring 2
32 AX20 0138 Electrical Clutch - MICE-13 1
33 AA08 0230 Rear Busing - M6 1
Part No.
Description
Q’ty Per
Assembly
Index
No.
101 0451 3006B Tapping Screw - M3x6
102 0720 0060E Retaining Ring - M6
103 0353 0060B Philips Pan Head Screw - M3x6
104 0450 3008B Tapping Screw - M3x8
105 0720 0040E Retaining Ring - M4
106 0720 0020E Retaining Ring - M2
107 0313 0060B Philips Pan Head Screw - M3x6
108 1105 0283 Clamp
Part No.
Description
Q’ty Per
Assembly
G065 15 Parts Location and List
8.PAPER TRAY UNIT (G065)
G065 16 Parts Location and List
8.PAPER TRAY UNIT (G065)
Index
No.
1 B004 2905 Universal Paper Tray (LT) 1
1 B004 2910 Universal Paper Tray (A4) 1
2 B004 2940 Bottom Plate 1
3 AF01 3006 Bottom Plate Pad 1
4 B004 2920 Front Side Fence 1
5 AF01 6166 Front Side Fence 1
6 B004 2923 Spring Plate - Release Lever 1
7 B004 2922 Release Lever - Side Fence 1
8 B004 2924 Paper Guide Plate - Front 1
9 B004 2930 Rear Side Fence 1
10 AF01 6167 Rear Side Fence 1
11 B004 2932 Rear Stopper Lever 1
12 B004 2933 Rear Stopper 1
13 B004 2934 Spring Plate - Lock Lever 1
14 B004 2935 Paper Guide Plate - Rear 1
15 AF01 7026 End Fence 1
16 B004 2952 Shoe- Left 1
17 A232 2987 Roller - Paper Tray 2
18 B004 2936 Gear - 16Z 1
19 B004 2947 Spring Plate-paper Size Sensor 1
20 B004 2954 Paper Size Dial (LT) 1
20 B004 2955 Paper Size Dial (A4) 1
21 B004 2948 Paper Size Sensor 1
22 B004 2943 Grounding Plate - Paper Tray 1
23 A232 2975 Bottom Lift Plate 1
24 B004 2915 Bottom Lift Shaft 1
25 B004 2951 Stopper-right 1
26 B004 2988 Handle - Paper Tray 1
27 AA00 3007 Decal- Paper Set Direction 1
28 G034 2987 Socket 1
29 A235 2979 Feeler - Paper Height Sensor 1
Part No.
Description
Q’ty Per
Assembly
Index
No.
101 0353 0060B Philips Pan Head Screw - M3x6
102 0452 3008B Tapping Screw - M3x8
103 0450 4008B Tapping Screw - 4x8
104 0450 3008B Tapping Screw - M3x8
105 0720 0060E Retaining Ring - M6
Part No.
Description
Q’ty Per
Assembly
G065 17 Parts Location and List
9.TONER HOPPER UNIT (G065)
G065 18 Parts Location and List
9.TONER HOPPER UNIT (G065)
Index
No.
1 B004 3208 Toner Supply Unit 1
2 A232 3266 Seal - Slide Rail 2
3 B004 3262 Slide Rail-toner Supply 1
4 AA14 5810 Slide Shaft 1
5 A232 3261 Handle - Toner Supply 1
6 A232 3263 Spring Plate - Toner Bottle 1
7 A232 3230 Case - Toner Supply Ass'y 1
8 AA06 3623 Pressure Spring 1
9 A232 3251 Chuck Shaft 1
10 A232 3252 Slider Ass'y 1
11 A134 3180 Bottle Chuck 1
12 A232 3240 Cover- Toner Bottle Ass'y 1
13 AA15 3083 Seal - Toner Supply Unit Cover 1
Part No.
Description
Q’ty Per
Assembly
Index
No.
101 0452 3010B Tapping Bind Screw - M3x10
102 0450 3008B Tapping Screw - M3x8
Part No.
Description
Q’ty Per
Assembly
G065 19 Parts Location and List
10.PCU UNIT 1 (G065)
G065 20 Parts Location and List
Loading...