*
To reduce the possibility of audible resonance during copying, the rear fusing plate and
right lower fusing stay have been changed. When replacing either of the old parts in the
field, install both new parts as a set. Please refer to Bellini RTB No.4 for details.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220, 230,
Dog-ears have a tendency to occur when using curled paper.
To minimize this, the following modification has been applied to machines in mass
production:
The height of the entrance guide has been raised 1 mm, changing the shape of both the
entrance guide and entrance cooling support guides. When replacing either of the old
parts in the field, install both new parts as a set.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERI AL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio
850
Gestetner 3285
Nashated D485
Rex Rotary
2885
Lanier 5485AH220,230,
# New index
Note 1:
The joint gear - 15Z (white gear: AB013748) which was included in the old toner supply
unit (A2943200), has been packed in the accessory plastic bag. The idler gear - 15Z
(A2943255) has been included in the new toner supply unit (A2943202). Please refer to
RTB No. 001 for details.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220, 230,
#New index
As per Lanier's request, the relay key counter harness has been added to the Lanier
production machines. Please refer to RTB No.5 for details.
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
A2944161 (Upper Fusing Exit Guide) and A2944165 (Exit Guide Bracket) were not
manufactured correctly in accordance with diagrams during the early stages of production.
The Production Division made corrections to the Upper Fusing Exit Guide and Exit Guide
Bracket by welding or gluing the spacer to conform to the diagrams. In addition, the parts
are now manufactured correctly and function normally in combination. If either of the two
parts needs to be replaced in the field, it may be impossible to replace the part individually.
To prevent this, the part numbers for both have been changed.
Therefore, when either of the old parts needs to be replaced in the field, they shouldboth be replaced together as a set. For parts control, the old parts (A2944161 and
A2944165) are not supplied any more.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
Bellini
S. America
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600100045
EuropeA294-24L0659120006
Europe, etc.A294-264B10100001
Europe etc.A294-27H3600100001
Date:
A294-14L0659120001
A294-15H3600100157
A294-17H3691200075
06-Apr-00
JAPAN
PRODUCTION
No.:
MA294008
Page 12
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Paper Dust Cleaner & Sensor Board Guide
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2292619A2942619Sensor Board Guide1 - 1X/O712
New part
DescriptionQ’tyIntPageIndex Note
number
A0962607Paper Dust Cleaner1 - 2691
Date:
20-Apr-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294009
H.K.
To meet standards
( )
To improve copy quality, the production machines have been modified as follows:
1. A second cutout has been added to the sensor board guide (see below).
2. A second paper dust remover (Paper Dust Cleaner) has been added to the rear of the
sensor board guide.
Note: Since there are other parts already attached to the front side, the paper dust cleaner
was attached to the rear side.
Sensor Board Guide
Second cutout
Second paper dust cleaner
JAPAN
PRODUCTION
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650030041
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600300131
A294-14L0650030001
A294-15H3600400632
A294-17H3600300495
Page 13
!"#$%& M
odificationBulletin
PAGE: 1/1
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Anti-static Brush
Parts catalog correction
To facilitate assembly
Part standardization
Date:
Vendor change
To improve reliability
Other
Please correct your parts catalogue as follows:
Not listed
Please add the following part to your parts catalogue.
Incorrect
part number
Correct
DescriptionQ’tyIntPageIndex Note
part number
B3011134Anti-Static Brush141*17
Illustration Correction
Please correct the illustration on page 40 as shown:
24-Apr-00
Prepared by:
To meet standards
No.:
H.K.
( )
MA294010
*: New Index
ADF front side
3:B3011131
17: ANTI-STATIC BRUSH
B3011134
3:B3011131
Page 14
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
Front Filter Holder Cover
Parts catalog correction
To facilitate assembly
Part standardization
New part
DescriptionQ’tyIntPageIndex Note
number
A2943264Filter Holder Cover - Front283*36
Date:
16-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294011
H.K.
To meet standards
( )
*:New Index
When removing and/or re-installing the development unit during servicing, the front toner
filter should not be touched. This may cause the front toner filter to become incorrectly
positioned. This may cause toner to leak from its gap. To facilitate servicing, two
translucent sheets (A2943264) have been added to the front filter holder to cover the
holder.
Front Toner Filter
0∼2 mm
0∼2 mm
Front Filter Holder Cover
(Translucent Sheet)
0∼2 mm
0∼2 mm
Page 15
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
16-May-00
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650030041
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600300131
A294-14L0650030010
A294-15H3600400632
A294-17H3600300422
No.:
MA294011
Page 16
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
AB032716Idle Pulley - M18213322
Bellini
Pulley - M18
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
AB032721Pulley - M182X/O13322
DescriptionQ’tyIntPageIndex Note
Date:
16-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294012
Hiroki Kobayashi
To meet standards
( )
To ensure proper rotation of the timing belt, one flange has been attached to either side of
the pulley. Previously, there was only one flange.
Old: Idle Pulley - M18
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Infotec 4850 MF220,230
Ricoh Aficio 850220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600300041
EuropeA294-24L0650030030
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600300090
New: Pulley - M18
A294-14L0650030001
A294-15H3600300239
A294-17H3600300359
Page 17
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
105 CPM Version Information
Parts catalog correction
To facilitate assembly
Part standardization
Date:
26-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294013
H.K.
To meet standards
( )
To start production of the 105 CPM (A295) version, the following unique parts have been
registered as spare parts.
number
AX430055Fusing Lamp - 230v/630w31058
A2954066Hot Roller Unit - 240v Usa1105*
A2954111Hot Roller Unit - 230v1105*
A2954206Fusing Paper Exit Unit - 240v
USA
A2954207Fusing & Paper Exit Unit - 230v
(EU)
A2955094MCU Board Harness1472
A2955172Hard Disk - Fireball Plus Kx21451
A2956930Model Name Plate - Svn118138
A2956934Model Name Plate - Lanier118138
A2956931Model Name Plate - Ges118138
A2956932Model Name Plate - Nsa118138
A2956933Model Name Plate - Rex118138
A2951285Right Front Door (Ricoh Only)1159
A2956912Right Front Door (Infotec Only)1159
A2957207Copier Operating Instructions Lt
(Ric)
A2957297Copier Operating Instruction Eng
Lt (Savin)
A2957260Copier Operating Instruction Eng
A3 (Inf)
A2957237Copier Operating Instruction Eng
Lt (Lan)
A2958607System Operating Instructions-
Eng Lt (Ric)
A2958697System Operating Instructions-
Eng Lt (Savin)
A2958660System Operating Instructions-
Eng A3 (Inf)
A2958637System Operating Instructions-
Eng Lt (Lan)
A2293899Transfer Belt1971
A2953810Transfer Belt Unit1497*
DescriptionQ’tyIntPageIndexNote
1103*
1103*
118139
118139
118139
118139
118140
118140
118140
118140
Page 18
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
26-May-00
No.:
MA294013
NOTE:
1. To meet the EMI (Electro Magnetic Interference) standards, a grounding harness is
used for the A295 copier SBU instead of the ground plates (A2941839). The grounding
harness is included in the scanner lens unit.
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22
EuropeA294-24
Europe, etc.A294-26
Europe etc.A294-27
S. America
South America
South America
Europe, etc.A295-22
EuropeA295-24
Europe, etc.A295-26
Europe, etc.A295-27
A294-14
A294-15
A294-17
A295-14
A295-15
A295-17
Page 19
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
AW010078Photosensor H=502 - 14319
Bellini
Original Length Sensor 1
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
A2941843Photosensor With Filter - H500 - 1X/O43*21
DescriptionQ’tyIntPageIndex Note
Date:
29-May-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294014
H.K.
To meet standards
( )
*: New Index
It was found in the Japanese field that A4 sideways originals might be detected as A3 in
platen mode. This malfunction might occur because original length sensor 1 mistakenly
detects fingerprints in platen mode. To correct this, the original length sensor has had a
filter added to reduce sensitivity.
Original Length Sensor 1
21: New Index
Page 20
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
29-May-00
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600300001
EuropeA294-24L0650030030
Europe, etc.A294-264B10300001
Europe etc.A294-27H3600300051
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650030001
A294-15H3600300239
A294-17H3600300359
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
No.:
MA294014
Page 21
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Spring Plates
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2943862A2943868Rear Frame Spring Plate1X/O9713
A2943865A2943879Front Spring Plate1X/O9721
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
30-May-00
Prepared by:
Vendor change
To improve reliability
Other
To meet standards
( )
Transfer Belt
Transfer
Unit Case
H.K.
No.:
MA294015
Power
Pack
Connector
Spring
Plates
Lever
In the domestic field, the spring plates were sometimes bent downwards and the transfer
belt was not released from the drum after the copy job finished. To reduce the possibility of
this symptom, the production machines have been modified as follows:
The shape of the spring plates (front & rear) has been changed to a straight type.
Page 22
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
30-May-00
Old
New
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650050011
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600400584
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650050001
A294-15H3600400632
A294-17H3600400077
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
Page 24
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Operating Instructions (NRG)
Parts catalog correction
To facilitate assembly
Part standardization
Date:
08-Jun-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294017
H.K.
To meet standards
( )
The responsibility for printing the operating instructions for the products for NRG Europe has been
transferred from RCL to REBV. As of April 2000 production, these documents are not packed
together with the machines at factory release in Japan. Therefore, SPC can no longer provide
them as service parts.
Old part
number
A2947290-Copier Operating Instructions
A2948690-System Operating Instructions
New part
number
DescriptionQ’tyIntPageIndex Note
1-018139
Eng A3 (NRG)
1-018140
Eng A3 (NRG)
Japan Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24
Europe, etc.A294-26
Europe etc.A294-27
S. America
South America
South America
Europe, etc.A295-22
EuropeA295-24
Europe, etc.A295-26
Europe, etc.A295-27
A294-14
A294-15
A294-17
A295-14
A295-15
A295-17
Page 25
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
Spring
From:
Bellini
Web Cleaning Roller & Cleaning Pressure
Technical Services Dept., GTS Division
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part standardization
Date:
10-Jul-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294018
H.K.
To meet standards
( )
1. Parts Catalogue Correction
In preparation for the modifications mentioned in #2 below, please correct the following
P/N - index number mismatch in your Parts Catalogues:
A2944134A2944132Oil Supply & Cleaning Web Unit1X/O1013
New part
number
DescriptionQ’tyIntPageIndex Note
X/O
as a
set
Please refer to RTB No.023 for details.
Note:
The old Cleaning Pressure Springs and Web Cleaning Roller are no longer supplied as
service parts. These should be replaced with the new parts mentioned above.
Page 26
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
10-Jul-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600500001
EuropeA294-24L0650050011
Europe, etc.A294-264B10500001
Europe etc.A294-27H3600500073
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650050001
A294-15H3600500197
A294-17H3600500347
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
Page 29
!"#$%M
odificationBulletin
PAGE: 1/1
Model: BelliniDate:
Modified Article:
From:
Technical Service Dept., GTS Division
Reason for
Modification:
Old part
number
A2944253A2944254Transport Belt - Paper Exit5X/O1091
Transport Belt
Parts catalog correction
To facilitate assembly
Part standardization
New part
number
Vendor change
To improve reliability
Other
DescriptionQ’tyIntPageIndex Note
14-Jul-00
Prepared by:
No.:
MA294021
H.K.
To meet standards
( )
During a continuous sequence of long duplex copy jobs, the transport belts in the fusing
exit section receive heat from the copy paper. This can cause the rubber belts to become
slack, which in turn can cause the belts to come off the rollers. To improve the durability of
the transport belt, the belt material has been changed to a heat-resistant silicone rubber.
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
#: New index
When the motor locks, a surge current flows through the motor driver circuit on the ADF
main control board, which may damage the circuit. The current capacitance of the circuit
has been increased to protect the circuit in the event of a current surge.
The following components have been modified:
IC121: P/N 14010919 has been removed.
IC121 (Fin) 59365221 has been removed.
Q101: P/N 14011066 has been changed to 14011104. New index No.195.
Q116,117: Newly added. P/N 14011104, index No. 195.
R105, R106 P/N 16001683 has been changed to P/N16000830. New index No.194.
C174,C175 P/N 16604102 has been changed to P/N 16604222. Index No. 187.
Q118, Q119 Newly added: P/N 14010886. New index 193.
(Q116,Q117,Q118, Q119): Newly added. P/N B3015580, new index No. 3.
Page 33
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
21-Jul-00
No.:
MA294023
The index number and description for the following component are missing from page 175
of the parts catalogue. Please add the following to your parts catalogues.
Incorrect
part number
Correct part
DescriptionQ’tyIntPageIndex Note
number
10050843Heat Sink - OSH2425SP0 - 1175#192
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600500001
EuropeA294-24L0650050011
Europe, etc.A294-264B10500001
Europe etc.A294-27H3600500073
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650050001
A294-15H3600500197
A294-17H3600400287
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
Page 34
odificationBulletin
M
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
ADF Main Control Board
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
B3015505B3015510ADF Main Control Board1X/O
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
21-Jul-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294024
H.K.
To meet standards
( )
175*
3922
During production, it was found that some ADF Main Control Boards had a relatively
narrow adjustment range for the transport drive motor speed. In some cases, the motors
could not reach the target adjustment speed.
The defective boards were not installed in the ADF Units. Therefore, the same symptom
will not occur on production machines released from the factory.
To ensure good operation of the ADF Main Control Board, IC #NJM4151 on the ADF Main
Control Board has been modified as follows:
Old
R
; 6.2kΩ±5%
0
C
;0.0047µF±10%
0
New
R
; 8.2kΩ±5%
0
C
; 0.0022µF±10%
0
Page 35
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
21-Jul-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600500001
EuropeA294-24L0650050011
Europe, etc.A294-264B10500001
Europe etc.A294-27H3600500073
S. America
South America
South America
Europe, etc.A295-22From 1st Production
EuropeA295-24From 1st Production
Europe, etc.A295-26From 1st Production
Europe, etc.A295-27From 1st Production
A294-14L0650050001
A294-15H3600500197
A294-17H3600500347
A295-14From 1st Production
A295-15From 1st Production
A295-17From 1st Production
No.:
MA294025
H.K.
To meet standards
( )
135*23
*: New Index
Page 37
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
DC Harness - Power Supply
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2945453A2945454DC Harness - Power Supply1X/O13921
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
03-Aug-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294026
H.K.
To meet standards
( )
Surge current may be generated when the door is closed and the door switch is activated.
This can cause SC985 to occur from the resulting electrical noise. To correct this, a meshmetal covering is used for the dc harness.
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Copy paper that tends to curl easily can touch the hot roller strippers when exiting the
duplex unit the second time. As a result, some toner may be left on the surface of the
strippers and rub off onto the next copy. Therefore, black lines can appear on the side face
of a copy stack. To improve copier performance, a spur has been attached to each hot
roller stripper.
Spur
Page 39
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
07-Aug-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600500049
EuropeA294-24L0650060016
Europe, etc.A294-264B10500001
Europe etc.A294-27H3600500073
S. America
South America
South America
Europe, etc.A295-22H3700600001
EuropeA295-24L066006XXXX
Europe, etc.A295-264A90600001
Europe, etc.A295-27H3700500021
A294-14L0650060001
A294-15H3600500197
A294-17H3600500347
A295-14L0660070001
A295-15H3700600056
A295-17H3700500001
No.:
MA294029
Page 44
odificationBulletin
M
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Upper Duplex Stay
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2944836A2944837Upper Duplex Stay1X/O11710
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
24-Aug-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294030
S. Hizen
To meet standards
( )
The shape of the Upper Duplex Stay has been changed as shown in the illustration below
to reduce the noise when the entrance guide (Page 119, Index 18) contacts the stay.
The material of the Rear Casing Guide and the shape of the Exit Electrode Plate have
been changed to improve the dirty side edge problem.
Each old part can physically be replaced with the new one, but to prevent side effects from
affecting the copy, these parts should be replaced at the same time.
The details of the shape change of the electrode are shown below.
Rear Casing Guide
Old
Exit Electrode Plate
New
Page 47
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
29-Aug-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canad a.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
The transfer belt for the 85cpm model has been standardized to that for the 105cpm model
A low-resistance transfer belt (A2293899) is used for the 105cpm machine to compensate
for the greater tendency of black lines to appear in half-tone areas. This is because the
transfer current for type B is higher than that of type A. Although the high-resistance
transfer belt (A2293852) is installed in the 85cpm production machines, only the lowresistance belt (105cpm model, A2293899) will be supplied as a service part. The belt can
be used for both machines and will facilitate parts standardization (the low-resistance
transfer belt can be used for both type A and B).
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22Service parts only
EuropeA294-24Service parts only
Europe, etc.A294-26Service parts only
Europe etc.A294-27Service parts only
S. America
South America
South America
Europe, etc.A295-22
EuropeA295-24
Europe, etc.A295-26
Europe, etc.A295-27
A294-14Service parts only
A294-15Service parts only
A294-17Service parts only
A295-14
A295-15
A295-17
Page 49
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Gear -108Z &Toner Bank Slider
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2943276A2943294Gear - 108Z USA (RIC)2X/X7911
A2943277A2943296Gear - 108Z EU (RIC)2X/X7911
A2943278A2943297Gear - 108Z OEM (NRG/SVN)2X/X7911
A2943279A2943298Gear - 108Z OEM2 (INF/LAN)2X/X7911
A2943290A2943292Toner Bank Slider2X/X81161
A2943308A2943046Toner Bank Unit - USA(RIC)1X/O75*
A2943309A2943047Toner Bank Unit - EU (RIC)1X/O75*
A2943272A2943048Toner Bank Unit (NRG/SVN)1X/O75*
A2943282A2943049Toner Bank Unit (INF/LAN)1X/O75*
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
28-Sep-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294033
J. Mochizuki
To meet standards
( )
Sometimes, the toner bottle cap may remain in the toner chuck when the bottle is
removed. The bottle cap can get caught by the toner chuck when the bottle is tilted upward
and removed.
To prevent the possible cause, the production machines have been modified as follows:
1. The length of the toner bank slider has been reduced from 45.1 mm to 44.1 mm.
2. The length of the toner bank slider guide in gear 108Z has been increased from 5.7 mm
to 6.7 mm.
3. A taper guide has been added to each toner bank slider and to gear-108Z.
4. Due to this modification, the part numbers of the toner bank unit have been changed.
Note 1:
When replacing the old toner bank slider or the gear in the field, be sure to install both
parts together as a set.
Page 50
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
Date:
28-Sep-00
Toner bank slider guide
in Gear - 108Z
5.7 mm to 6.7 mm
Toner Bank Slider
45.1 mm to 44.1 mm
No.:
MA294033
Taper guide
added:
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600900001
EuropeA294-24L0650100019
Europe, etc.A294-264B10900096
Europe etc.A294-27H3600900096
S. America
South America
South America
Europe, etc.A295-22H3700900001
EuropeA295-24L0660090001
Europe, etc.A295-264A90900001
Europe, etc.A295-27H3700900016
A294-14L0650100001
A294-15H3600900169
A294-17H3601000107
A295-14L0660090011
A295-15H3700900033
A295-17H3700900080
Page 51
odificationBulletin
M
PAGE: 1/2
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Transport Belt Unit
Parts catalog correction
To facilitate assembly
Part standardization
Date:
04-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294034
J. Mochizuki
To meet standards
( )
To absorb noise from the transport belt rear stopper during the production line test, a
rubber cushion has been added to the transport belt unit (13: B3011412).
Old part
number
New part
DescriptionQ’tyIntPageIndex Note
number
B3011141Rubber Cushion131*29
*: New index
B3011141
Page 52
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
04-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600200022
EuropeA294-24L0650030030
Europe, etc.A294-264B10200001
Europe etc.A294-27H3600200051
S. America
South America
South America
Europe, etc.A295-22
EuropeA295-24
Europe, etc.A295-26
Europe, etc.A295-27H3700500021
A294-14L0650030001
A294-15H3600200180
A294-17H3600200238
A295-14
A295-15
A295-17H3700500001
No.:
MA294034
Page 53
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Modified Article:
From:
Bellini
Power Supply Unit
Technical Services Dept., GTS Division
Reason for
Modification:
T0001773
Old part
number
AZ250012AZ250013
New part
number
Parts catalog correction
To facilitate assembly
Part standardization
DescriptionQ’tyIntPageIndex Note
Power Supply Unit - 819W 200240V
Date:
13-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
1X/O1411
No.:
MA294035
S. Hizen
To meet standards
( )
High voltage areas of the PSU circuit were insulated by silicone resin to protect the circuit
from conductive fibers like those of the anti-static brush.
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600600389
EuropeA294-24L0650060016
Europe, etc.A294-264B10600001
Europe etc.A294-27H3600600421
S. America
South America
South America
Europe, etc.A295-22H3700600001
EuropeA295-24L0660090001
Europe, etc.A295-264A90600001
Europe, etc.A295-27H3700600021
A294-14L0650060001
A294-15H3600600531
A294-17H3600600001
A295-14L0660070001
A295-15H3700600056
A295-17H3700500001
Page 56
!"#$%M
odificationBulletin
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Developement Unit
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2943202A2943203Toner Supply Unit1X/O83*
A2943261A2943258Toner Hopper Joint1X/O833
A2943217A2943223Seal - 45X12.5X32X/O837
A2943216A2943222Upper Case Seal – Right1X/O838
A2943215A2943221Upper Case Seal – Left1X/O839
To minimize toner dusting, the following countermeasures have been applied to the
development unit and toner hopper.
1. To ensure that toner does not leak from the toner supply unit (toner hopper) casing, the
material of the seals has been changed to a high-density type of sponge (indices 7, 8, 9,
10, 14, 24, 25, 26 - p. 83). Additionally, the width of AA151794 (index 26) has been
increased from 5 to 10 mm.
2. To seal two gaps in the toner supply unit casing, two seals have been added to the
toner supply unit.
3. To ensure that toner does not leak from the toner hopper joint (index 3 - p. 83), the
shape of the toner hopper joint has been modified as shown below.
4. To minimize toner dusting from both sides of the development unit, the material of the
development unit side seals has been changed (indices 4, 5 - p. 87).
Note:
1. For machines without the A2949502 seal from the enhancement kit (A2949901) or
machines in which this seal has come off, please replace the AA141794 seal with the
new A2943238 seal. This will have the same effect. Please refer to RTB RA294018.
2. Just as with Note 1 above, please replace the A2943237 seal with the new AA141793
seal, instead of replacing the A2949505 seal from the enhancement kit. Please refer to
RTB RA294018.
3. A2943235 can be used to replace A2949503 or A2949504, both of which are contained
in enhancement kit A2949901. To replace A2949503 with the new seal A2943235, cut
the new seal to 47 mm.
Page 57
!"#$%M
odificationBulletin
PAGE: 2/2
Model:
Bellini
A2943261
A2943258
Date:
13-Oct-00
A2943235
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650050011
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600400584
S. America
South America
South America
Europe, etc.A295-22H3700600001
EuropeA295-24L0660090001
Europe, etc.A295-264A90600001
Europe, etc.A295-27H3700500021
A294-14L0650050001
A294-15H3600400632
A294-17H3600400001
A295-14L0660070001
A295-15H3700600056
A295-17H3700500001
No.:
MA294038
Page 58
odificationBulletin
M
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Lower Exit Guide
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2944309A2944407Lower Exit Guide1-1X/O1133
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
13-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294039
S. Hizen
To meet standards
( )
The cut-out in the lower exit guide for the paper exit sensor feeler has been narrowed to
ensure that the feeler is not broken off during removal of jammed paper.
Paper Exit Sensor
Lower Exit Guide
6mm → 5mm
Page 59
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
13-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600600389
EuropeA294-24L0650060016
Europe, etc.A294-264B10600001
Europe etc.A294-27H3600600421
S. America
South America
South America
Europe, etc.A295-22H3700600001
EuropeA295-24L0660090001
Europe, etc.A295-264A90600001
Europe, etc.A295-27H3700500021
A294-14L0650060001
A294-15H3600600531
A294-17H3600600001
A295-14L0660070001
A295-15H3700600056
A295-17H3700500001
No.:
MA294039
Page 60
odificationBulletin
M
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
A229-3852A294-3962Transfer Belt1-1X/O971
Bellini
Transfer Belt
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
13-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294040
S. Hizen
To meet standards
( )
The thickness of the transfer belt coating has been increased to ensure that the cleaning
blade does not catch on the belt and get pulled out of position.
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3691200001
EuropeA294-24L0659120006
Europe, etc.A294-264B11290001
Europe etc.A294-27H3691200026
S. America
South America
South America
Europe, etc.A295-22
EuropeA295-24
Europe, etc.A295-26
Europe, etc.A295-27H3700500021
A294-14L0659120001
A294-15H3691200059
A294-17H3691200074
A295-14
A295-15
A295-17H3700500001
No.:
MA294041
Page 63
odificationBulletin
M
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Upper Stay - Transfer Unit
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2943563A2943569Upper Stay – Transfer Unit1-1X/O958
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
16-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294042
S. Hizen
To meet standards
( )
The edge shape of the Upper Stay – Transfer Unit has been changed to increase the
clearance between the edge and the drum surface. This is to prevent toner from
accumulating on the edge of the upper stay.
Drum
Old
Upper Stay
Transfer - Unit
Upper Stay
Transfer - Unit
New
⇒
Page 64
odificationBulletin
M
PAGE: 2/2
Model:
Bellini
Date:
16-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600600389
EuropeA294-24L0650060016
Europe, etc.A294-264B10600001
Europe etc.A294-27H3600600421
S. America
South America
South America
Europe, etc.A295-22H3700600001
EuropeA295-24L0660090001
Europe, etc.A295-264A90600001
Europe, etc.A295-27H3700600021
A294-14L0650060001
A294-15H3600600531
A294-17H3600600001
A295-14L0660070001
A295-15H3700600056
A295-17H3700600081
No.:
MA294045
Page 70
!"#$%M
odificationBulletin
PAGE: 1/3
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
Safety Information Sheet (European machine only)
Parts catalog correction
To facilitate assembly
Part standardization
New part
DescriptionQ’tyIntPageIndex Note
number
A2678561Safety Information Sheet1 181*44
Date:
18-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294046
S. Hizen
To meet standards
( )
*: New index
As per a request from marketing, the safety information sheets have been added to
machine accessories (16 languages, 2 pages for each language, A5 size).
The 16 languages are: English, French, German, Italian, Spanish, Dutch, Swedish,
Norwegian, Finish, Danish, Hungarian, Portuguese, Polish, Czech, Greek, and Arabic.
Page 71
!"#$%M
odificationBulletin
PAGE: 2/3
Model:
Bellini
Date:
18-Oct-00
No.:
MA294046
Page 72
!"#$%M
odificationBulletin
PAGE: 3/3
Model:
Bellini
Date:
18-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600800001
EuropeA294-24L0650080072
Europe, etc.A294-264B10800001
Europe etc.A294-27H3600800151
S. America
South America
South America
Europe, etc.A295-22H3700800001
EuropeA295-24L0660090001
Europe, etc.A295-264A90800001
Europe, etc.A295-27H370080011
A294-14L0650080001
A294-15H3600800217
A294-17H3600700470
A295-14L0660070001
A295-15H3700800041
A295-17H3700800053
Page 74
odificationBulletin
M
PAGE: 1/2
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
AA15-1676Upper Front Seal – Hopper0-1-7118
Upper Front Seal - Hopper
Parts catalog correction
To facilitate assembly
Part standardization
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
18-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294048
S. Hizen
To meet standards
( )
∗New Index
∗
The foam seal (Upper Front Seal – Hopper) has been added to the Sensor Board Guide to
prevent the scattered toner from dropping on the registration rollers.
The part AA15-1676 is a common part with other models, and unfortunately the description
of this part is not appropriate for its usage in this model.
Sensor Board Guide
Upper Registration
Roller
This hole has been sealed
Seal position
Upper Front
Seal – Hopper
.
Sensor Board
Guide
Sensor Board
Guide
Registration
Rollers
Page 75
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
18-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600700001
EuropeA294-24L0650070028
Europe, etc.A294-264B10700001
Europe etc.A294-27H3600700083
S. America
South America
South America
Europe, etc.A295-22H3700700001
EuropeA295-24L0660090001
Europe, etc.A295-264A90700001
Europe, etc.A295-27H3700700016
A294-14L0650070001
A294-15H3600700244
A294-17H3600600205
A295-14L0660070001
A295-15H3700700042
A295-17H3700700056
No.:
MA294050
Page 80
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
I/F Board Fuse
Parts catalog correction
To facilitate assembly
Part standardization
Date:
19-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294051
J. Mochizuki
To meet standards
( )
The fuse (FU101) on the optional interface board has been registered as a service part.
Please add the following item to the Interface Board Type 850 (B327) parts catalog.
Incorrect
part number
Correct
DescriptionQ’tyIntPageIndex Note
part number
11070719Fuse – K19371/1A13*3
*: New Index
FU101
Page 81
odificationBulletin
M
PAGE: 1/2
Model:
Bellini
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
A294-1793Cushion Seal – 20x50x40-2-4530*
Optical Housing Frame
Parts catalog correction
To facilitate assembly
Part standardization
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
23-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294052
S. Hizen
To meet standards
( )
*New Index
Two cushion seals have been added to the optical housing frame to prevent frame
damage during machine transportation.
Optical Housing Frame
Cushion Seals
have been
added here
Page 82
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
23-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600500001
EuropeA294-24L0650050011
Europe, etc.A294-264B10500001
Europe etc.A294-27H3600500073
S. America
South America
South America
Europe, etc.A295-22H3700600001
EuropeA295-24L0660090001
Europe, etc.A295-264A90600001
Europe, etc.A295-27H3700500021
A294-14L0650050001
A294-15H3600500197
A294-17H3600500629
A295-14L0660070001
A295-15H3700600056
A295-17H3700500001
No.:
MA294052
Page 83
Reissued: 07-Nov-00
odificationBulletin
M
PAGE: 1/2
Model:
Bellini
Date:
23-Oct-00
No.:
MA294053a
MB Correction
The items in bold italics have been corrected or added.
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
A294-6736A294-6739Right Front Fence1-1X/X556*1
A293-6680A294-6670Base – Right Tandem Tray1-1X/X557*1
Right Front Fence
Parts catalog correction
To facilitate assembly
Part standardization
New part
DescriptionQ’tyIntPageIndex Note
Vendor change
To improve reliability
Other
number
A096-6671Paper Guide Plate0-1-5517*2
Prepared by:
To meet standards
( )
S. Hizen
*Note1: Interchangeability as a set of
the Right Front Fence and the
Right Tandem Tray Base is X/O.
*Note2: New Index
The paper guide plate (mylar with cushion) has been added to the right front fence to
ensure the paper feeding.
The shape of the fence has also been changed for the paper guide plate. The size of the
fence set holes on the tray base have also been changed.
The new right front fence (P/N A294-6739) includes the paper guide plate
(P/N A096-6671).
Right Tandem Tray Base
The hole size has
been changed
17
Paper Guide Plate
Right Front Fence
Page 84
Reissued: 07-Nov-00
odificationBulletin
M
PAGE: 2/2
Model:
Bellini
Date:
23-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600700062
EuropeA294-24L0650080072
Europe, etc.A294-264B10800001
Europe etc.A294-27H3600700163
S. America
South America
South America
Europe, etc.A295-22H3700700001
EuropeA295-24L0660090001
Europe, etc.A295-264A90700001
Europe, etc.A295-27H3700700016
A294-14L0650080001
A294-15H3600700244
A294-17H3600700347
A295-14L0660070001
A295-15H3700700042
A295-17H3700700056
No.:
MA294054
Page 87
odificationBulletin
M
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
A294-5481A294-5482Harness – Paper Feed Unit1-1X/O694
Bellini
Paper Feed Unit Harness
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
25-Oct-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294055
S. Hizen
To meet standards
( )
The Paper Feed Unit Harness has been changed as shown in the illustration below to
prevent the harness from being pinched under the lower left hand corner of the
development drive motor.
40mm →80mm
(Old) (New)
80mm → 40mm
(Old) (New)
(Old Location)
LCT Relay Clutch
(New Location)
Page 88
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
25-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600800001
EuropeA294-24L0650080072
Europe, etc.A294-264B10800001
Europe etc.A294-27H3600800151
S. America
South America
South America
Europe, etc.A295-22H3700800001
EuropeA295-24L0660090001
Europe, etc.A295-264A90800001
Europe, etc.A295-27H3700800011
A294-14L0650080001
A294-15H3600800217
A294-17H3600700509
A295-14L0660070001
A295-15H3700800041
A295-17H3700800053
No.:
MA294056
Page 91
odificationBulletin
M
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
A806-1861A806-1862Original Table Base1-1X/O2523
Bellini
DF Original Table Base
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
02-Nov-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294057
S. Hizen
To meet standards
( )
A hole has been made in the original table base to prevent the original table base from
hitting the base lever fulcrum and to ensure that the bottom plate HP sensor is actuated.
Base Lever
Bottom Plate HP Sensor
A hole has been made
Original Table Base
Base Lever Fulcrum
Page 92
odification Bulletin
M
PAGE: 2/2
Model:
Bellini
Date:
02-Nov-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Previously, the cushion for the junction gate solenoid was attached to the bracket using
double-sided tape to correct the noise generated by the duplex junction gate. Since in
some cases the tape gradually peels off, the cushion has been changed from a stick-on
type to one with a slit that fits over the bracket.
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600800001
EuropeA294-24L0650080072
Europe, etc.A294-264B10800001
Europe etc.A294-27H3600800151
S. America
South America
South America
Europe, etc.A295-22H3700800001
EuropeA295-24L0660090001
Europe, etc.A295-264A90800001
Europe, etc.A295-27H3700800011
A294-14L0650080001
A294-15H3600800217
A294-17H3600700401
A295-14L0660070001
A295-15H3700800041
A295-17H3700800053
Page 96
!"#$%M
odificationBulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Hard Disk Drive
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A6915879A6915860HDD:ATA:QLCT102O/O1451
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
09-Nov-0
Prepared by:
Vendor change
To improve reliability
Other
0No.:
M. Matsuda
To meet standards
( )
Due to a vendor change, the part number has been changed.
MA294061
Page 97
!"#$%M
Reissued: 10-Nov-00
odificationBulletin
PAGE: 1/3
Model:
Bellini
Date:
13-Oct-00
No.:
MB Correction
The items in bold italics have been corrected or added.
Modified Article:
From:
Technical Services Dept., GTS Division
Reason for
Modification:
Old part
number
A2943202A2943203Toner Supply Unit1X/O83*
A2943261A2943258Toner Hopper Joint1X/O833
A2943217A2943223Seal - 45X12.5X32X/O837
A2943216A2943222Upper Case Seal – Right1X/O838
A2943215A2943221Upper Case Seal – Left1X/O839
To minimize toner dusting, the following countermeasures have been applied to the
development unit and toner hopper.
1. To ensure that toner does not leak from the toner supply unit (toner hopper) casing, the
material of the seals has been changed to a high-density type sponge (indices 7, 8, 9,
10, 14, 24, 25, 26 - p. 83). Additionally, the width of AA151794 (index 26) has been
increased from 5 to 10 mm. All modifications above were material changes, except
for AA151794 to A2943238, which was both a material change and a shape
change.
2. To seal two gaps in the toner supply unit casing, two seals (A2943235, please refer to
figure 2 on the next page) have been added to the toner supply unit.
3. To ensure that toner does not leak from the toner hopper joint (index 3 - p. 83), the
shape of the toner hopper joint has been modified as shown in figure 1 on the next
page.
4. To minimize toner dusting from both sides of the development unit, the material of the
development unit side seals has been changed (indices 4, 5 - p. 87).
Note:
1. For machines without the A2949502 seal from the enhancement kit (A2949901) or
machines in which this seal has come off, please replace the AA151794 seal with the
new A2943238 seal. This will have a better effect than the combination ofAA151794 and A2949502. Please refer to RTB RA294018.
Page 98
!"#$%M
Reissued: 10-Nov-00
odificationBulletin
PAGE: 2/3
Model:
2.Just as with Note 1 above, please replace the AA151793 seal with the new A2943237
seal, instead of replacing the A2949505 seal from the enhancement kit. Please refer to
RTB RA294018.
3.A2943235 can be used to replace A2949503 or A2949504, both of which are contained
in enhancement kit A2949901. The shape of A2943235 is almost the same as that of
A2949504. However, A2949503 is shorter than A2943235. This is because A2943235
is attached at the factory under sponge seal A2943236. So when replacing
A2949503 with A2943235, cut A2943235 to 47 mm.
Bellini
A2943261
A2943258
A2943236
Date:
13-Oct-00
A2943235
No.:
MA294038a
Figure 1Figure 2
Page 99
!"#$%M
Reissued: 10-Nov-00
odificationBulletin
PAGE: 3/3
Model:
Bellini
Date:
13-Oct-00
RCL (Japan) Production
MODEL NAMEV/HzDESTINATIONCODESERIAL NO.
Lanier 5485AG240/60USA, Canada,
S. America
Savin 2085DP
Gestetner 3285
Ricoh Aficio 850240/60USA, Canada.
Gestetner 3285
Nashated D485
Rex Rotary 2885
Lanier 5485AH220,230,
Gestetner 32105
Nashated D 4105
Rex Rotary 28105
Lanier 5505AH220,230,
Infotec 4105MF220,230
Ricoh Aficio 1050220,230,
240/60USA, Canada,
South America
South America
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
240/60USA, Canada,
220,230,
240/50,60
240/50,60
240/50,60
240/50,60
Europe, etc.A294-22H3600400536
EuropeA294-24L0650050011
Europe, etc.A294-264B10400001
Europe etc.A294-27H3600400584
S. America
South America
South America
Europe, etc.A295-22H3700600001
EuropeA295-24L0660090001
Europe, etc.A295-264A90600001
Europe, etc.A295-27H3700500021
A294-14L0650050001
A294-15H3600400632
A294-17H3600400001
A295-14L0660070001
A295-15H3700600056
A295-17H3700500001
No.:
MA294038a
Page 100
odificationBulletin
M
PAGE: 1/2
Model:
Modified Article:
From:
Reason for
Modification:
Bellini
Waste Toner Collection Coil
Technical Services Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A2943411A2943285TONER COLLECTION COIL1X/O8122
New part
number
DescriptionQ’tyIntPageIndex Note
Date:
22-Dec-00
Prepared by:
Vendor change
To improve reliability
Other
No.:
MA294062
J. Mochizuki
To meet standards
( )
It was reported from the field that the waste toner full condition cannot be reset even after
the waste toner collection bottle is replaced with a new one. This was caused by hardened
toner which blocked the tip of the waste toner coil.
To ensure that this does not occur, the length of the toner collection coil [A] has been
increased, and a center shaft has been added to increase the strength of the coil.
See RTB RA294041 for details on recommended action for the machines before this
modification in the field.
[A]
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.