Page 1
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 1 PAGE 1 OF 2
ISSUED ON: June 15, ’95
Model ST26 (Matt20B) Volt/Hz
Modified Article Cushion 39 x 11
Reason for
Modification
Old P/N New P/N Description Q’ty Used
To eliminate vibration noise from the bin drive bracket, two rubber cushions
have been added between the frame and the bracket as shown in the
illustration below.
A5543114 Cushion 39 x 11
0 → 2
* New Index
Sorter Frame
Date of
Modification
Parts Catalog
Index No. Page
* 35 11
Serial Number
Bin Drive
Bracket
Cushion
Page 2
MODIFICATION BULLETIN NO. 1 PAGE 2 OF 2
ISSUED ON: June 15, ’95
MODEL NAME
ST - 26 115/60 USA, Canada A554-15 2A45040001
ST - 26
ST - 26
ST - 26 220, 240/50 Europe A554-26 3G70450001
V/Hz DESTINATION CODE SERIAL NUMBER
115/60
220, 240/50
115/60
220, 240/50
Whole World A554-17 A3805040001
Whole World A554-22 8805040001
Page 3
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 2
ISSUED ON: June 15, ’95
Model ST26 (Matt20B) Volt/Hz
Modified Article Bracket - Lower Exit Sensor
Reason for
To ensure that the paper exit sensor functions correctly
Modification
Inter-
Old P/N New P/N Description Q’ty Used
A3742183 A5542183 Bracket - Lower Exit Sensor
1 → 1
change-
ability
X/O 8 9
The paper exit sensor feeler sometimes
malfunctions and turns off, even tho ugh a
h : 24.5 mm → 27.3 mm
sheet of paper is still underneath the sensor.
To lower the sensor feeler position and
ensure that the sensor is actuated correctly,
h
the height of the senso r b racke t ha s bee n
changed as shown in the illustration.
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
(ON position)
Paper
Sensor Feeler (OFF position)
Page 4
MODIFICATION BULLETIN NO. 2 PAGE 2 OF 2
ISSUED ON: June 15, ’95
MODEL NAME
ST - 26 115/60 USA, Canada A554-15 2A45030001
ST - 26
ST - 26
ST - 26 220, 240/50 Europe A554-26 3G70350001
V/Hz DESTINATION CODE SERIAL NUMBER
115/60
220, 240/50
115/60
220, 240/50
Whole World A554-17 A3805030001
Whole World A554-22 8805030001
Page 5
MODIFICATION BULLETIN NO. 3 PAGE 1 OF 1
ISSUED ON: August 31, ’95
Model Phoenix-20bin Sorter Stapler Volt/Hz
Modified Article Parts Catalog No serial number cut-in infomation
Reason for
Parts Catalog Correction
Modification
Date of
Modification
Serial Number
Please correct your parts catalog as follows:
INCORRECT P/N CORRECT P/N Description Q’ty Used
A374 2141 A374 2147 Plate Spring - Upper Cover
A374 2147 A374 2141 Exit Roller Guide
1 → 1
1 → 1
Index No. Page
Parts Catalog
73
21 3
M. Iwasa, Manager
Technical Support Departme nt
Page 6
MODIFICATION BULLETIN NO. 4 PAGE 1 OF 1
ISSUED ON: October 15, ’95
Model ST26 (Matt20B) Volt/Hz
Modified Article Part Catalog No serial number cut-in information
Reason for
Part Number assigned for the sorter mounting frame.
Modification
Parts Catalog
New P/N Description
Index No. Page
A554 1151 S/S Mounting Frame 26 7
Date of
Modification
Serial Number
26
M. Iwasa, Manager
Technical Support Department
Page 7
MODIFICATION BULLETIN NO. 5 PAGE 1 OF 2
ISSUED ON: November 15, ’95
Model ST26 Volt/Hz
Modified Article Main Control Board
Reason for
To meet the CE Mark Standards
Modification
Inter-
Old P/N New P/N Description Q’ty Used
A5545100 A5545105 Main Control Board
1 → 1
change-
ability
X/O 31 11
Note: In markets oth er than Europe, the interchangeability is O/O.
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
M. Iwasa, Manager
Technical Support Department
Page 8
MODIFICATION BULLETIN NO. 5 PAGE 2 OF 2
ISSUED ON: November 15, ’95
MODEL NAME
ST - 26 115/60 USA, Canada A554-15 2A45070001
ST - 26
ST - 26
ST - 26 220, 240/50 Europe A554-26 3G75070001
V/Hz DESTINATION CODE SERIAL NUMBER
115/60
220, 240/50
115/60
220, 240/50
Whole World A554-17 A3805070001
Whole World A554-22 8805070001
Page 9
MODIFICATION BULLETIN NO. 6 PAGE 1 OF 1
ISSUED ON: November 30, ’95
Model ST26 Volt/Hz
Modified Article Cushion No serial number cut-in information.
Reason for
To facilitate assembly in the factory
Modification
Inter-
Old P/N New P/N Description Q’ty Used
A498 2266 Cushion 8 x 40
A554 2252 Cushion 9 x 83
2 → 0
0 → 1
change-
ability
O/O
Index No. Page
16 3
16 3
Date of
Modification
Parts Catalog
Serial Number
Cushion 8 x 40
Proof Lever
Cushion 9 x 83
A544 2252
M. Iwasa, Manager
Technical Support Department
Page 10
MODIFICATION BULLETIN NO. 7 PAGE 1 OF 2
ISSUED ON: December 31, ’95
Model ST26 Volt/Hz
Modified Article
Reason for
Modification
Bin Shaft Cover
To facilitate the bin home sensor adjustment
Date of
Modification
The window shape of the Front Bin Sha ft Cover ha s been cha ng ed as shown in the illustration for the above reason.
Old P/N New P/N Description Q’ty Used
A374 1622 A554 1622 Bin Shaft Cover - Front
Bin Shaft Cover - Front
Bin
1 → 1
Old Window Shape
Inter-
change-
ability
O/O 28 11
Index No. Page
Parts Catalog
Serial Number
7.5 ~
11.5mm
Adjustment
Range
7.5mm
Bin
11.5mm
New Window Shape
M. Iwasa, Manager
Technical Support Department
Page 11
MODIFICATION BULLETIN NO. 7 PAGE 2 OF 2
ISSUED ON: December 31, ’95
MODEL NAME
ST - 26 115/60 USA, Canada A554-15 2A45030001
ST - 26
ST - 26
ST - 26 220, 240/50 Europe A554-26 3G70350001
V/Hz DESTINATION CODE SERIAL NUMBER
115/60
220, 240/50
115/60
220, 240/50
Whole World A554-17 A3805030001
Whole World A554-22 8805030001
Page 12
MODIFICATION BULLETIN NO. 8 PAGE 1 OF 3
ISSUED ON: December 31, ’95
Model ST26 Volt/Hz
Modified Article
Reason for
Modification
Exit Guide Spacer and Vibrating Roller Holder
To prevent paper skew
Date of
Modification
To prevent paper from skewing, two spa cers ha ve be en add ed on the exit guid e pla te , and th e vibra tin g rolle r holders
have been changed as shown in the illustrat ion .
Old P/N New P/N Description Q’ty Used
A554 2139 Spacer - 0.25
A554 2171 A554 2173
Vibrating Holder
0 → 2
2 → 2
Inter-
change-
ability
X/O 12 9
Index No. Page
Parts Catalog
41 9
Serial Number
Page 13
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 8 PAGE 2 OF 3
Spacer - 0.25
A554 2139
Spacer
ISSUED ON: December 31, ’95
2 ± 0.5mm
4mm
OLD
Transport Frame
3 ± 0.5mm
3mm
Exit Guide
Plate
Spacer
New
Page 14
MODIFICATION BULLETIN NO. 8 PAGE 3 OF 3
ISSUED ON: December 31, ’95
MODEL NAME
ST - 26 115/60 USA, Canada A554-15 2A45070001
ST - 26
ST - 26
ST - 26 220, 240/50 Europe A554-26 3G70750001
V/Hz DESTINATION CODE SERIAL NUMBER
115/60
220, 240/50
115/60
220, 240/50
Whole World A554-17 A3805070001
Whole World A554-22 8805070001
Page 15
MODIFICATION BULLETIN NO. 9 PAGE 1 OF 2
ISSUED ON: December 31, ’95
Model ST26 Volt/Hz
Modified Article
Reason for
Modification
End Fence Stopper
To prevent the end fence springs of the sorter bins from coming off
The end fence stoppers have been ad ded to each bin for the above reason.
The parts numbers for the Bin Ass’y have also been change d as follows.
Inter-
Old P/N New P/N Description Q’ty Used
A554 3512 End Fence Stopper
A554 3505 A554 3506
A554 3507 A554 3508 Lower Bin Ass’y
Bin Ass’y
0 → 20
19 → 19
1 → 1
change-
ability
X/O 15 15
X/O 22 15
Stopper
Spring
Date of
Modification
Parts Catalog
Index No. Page
24 15
Serial Number
End Fence Stop per
End Fence Spring
M. Iwasa, Manager
Technical Support Department
Page 16
MODIFICATION BULLETIN NO. 9 PAGE 2 OF 2
ISSUED ON: December 31, ’95
MODEL NAME
ST - 26 115/60 USA, Canada A554-15 2A45090001
ST - 26
ST - 26
ST - 26 220, 240/50 Europe A554-26 3G70950001
V/Hz DESTINATION CODE SERIAL NUMBER
115/60
220, 240/50
115/60
220, 240/50
Whole World A554-17 A3805090001
Whole World A554-22 8805090001
Page 17
MODIFICATION BULLETIN NO. 10 PAGE 1 OF 1
T. Inoue, General Manager
1st Field Information Dept . QAC
ISSUED ON: May 15, ’96
Model ST26 Volt/Hz
Modified Article
Reason for
Modification
Parts Catalog
Parts Number assignment
A part number for the cushion on the rear cover has been assign ed .
Please add this part number to your pa rts cat alog.
Correct P/N Description Q’ty Used
A554 1910 Cushion - Rear Cover
0 → 1
Index No. Page
Parts Catalog
22 3
#22
Date of
Modification
No serial number cut-in information
Serial Number
Page 18
MODIFICATION BULLETIN NO. 11 PAGE 1 OF 1
ISSUED ON: September 15, ’96
Model ST26 Volt/Hz
Modified Article Parts Catalog No serial number cut-in information
Reason for
Parts Catalog Correction
Modification
Date of
Modification
Serial Number
Please delete this part from your parts catalog.
A special tool is needed to install this part on the bin.
Old P/N Description Q’ty Used
A374 3516 End Fence
1 → 0
Index No. Page
Parts Catalog
18 15
T. Inoue, General Manager
1st Field Information Dept. QAC
Loading...