MODIFICATION BULLETIN NO. 1 Page 4 of 4ISSUED ON: December 15, ’90
MODEL NAME
P.B. D908115/60115/60A497 - 11
SAVIN ARDF for 9520115/60115/60A497 - 15
NASHUA RF4050115/60115/60A497 - 16
RICOH DF56115/60115/60A497 - 17
NASHUA RF4050220,240/50220,240/50A497 - 25
INFOTEC ARDF V220,240/50220,240/50A497 - 26
RICOH DF56220,240/50220,240/50A497 - 27
V/HzDESTINATIONCODESERIAL NUMBER
MODIFICATION BULLETIN NO.2
ISSUED ON: Jan. 31, ’91
Model
Modified Article
ARDF for F40
Decal Sheet - Multi
(Infotec
and NASHUA)
Reason for
New
decal
Modification
This multilingual decal sheet has been registered as a service part.
P/N
A4971512
A4971513
Description
Decal Sheet - Multi - NASHUA
Decal Sheet - Multi - Infotec
Index No.
8
8
Page
23
23
Volt/Hz
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO.2
Page 2 of 2
ISSUED ON: Jan. 31, ’91
MODEL NAME
V/Hz
DESTINATION
CODE
SERIAL NUMBER
Reissued on: February 29, ’92
MODIFICATION BULLETIN NO. 3 Page 1 of 5ISSUED ON: April 30, ’91
ModelARDF for F40Volt/Hz
Modified ArticleFriction Belt
Reason for
To ensure the original separation
Modification
Draw
No.
Old Parts
No.
A4971191A4971183Friction Belt Holder (SAVIN)1 → 1X/X33
A4971192A4971184Friction Belt Holder (NASHUA)1 → 1X/X33
A4971193A4971185Friction Belt Holder (INFOTEC)1 → 1X/X as a set X/O33
A4971194A4971186Friction Belt Holder (P.B.)1 → 1X/X33
A4971198A4971182Friction Belt Holder1 → 1X/X33
A4971206A4971170Friction Belt1 → 1X/X63
New Parts
No.
Description
Date of
Modification
A.B.C.
RankPart No.DescriptionIndex No. Page
Q’ty Used
Old → New
Inter-
change-
ability
Part needed for replacement by new partParts Catalog
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
DETAILS OF MODIFICATION
To ensure the original separation, the following parts have been modified.
1. Friction Belt Holder : The stopper has been added so that the friction belt will bend less.
Reissued on: February 29, ’92
MODIFICATION BULLETIN NO. 3 Page 2 of 5ISSUED ON: April 30, ’91
Stopper
OldNew
2. Friction Belt : The material has been changed to minimize the amount of toner adhering to the be lt.
Old
New
Reissued on: February 29, ’92
MODIFICATION BULLETIN NO. 3 Page 3 of 5ISSUED ON: April 30, ’91
DETAILS OF MODIFICATION
3. Original Feed Roller : To improve feeding of the original, the groove has been added on the orig inal feed roller.
Old
Flat
Groove
New
Reissued on: February 29, ’92
MODIFICATION BULLETIN NO. 3 Page 4 of 5ISSUED ON: April 30, ’91
DETAILS OF MODIFICATION
4. Original Guide : The original guide has been modified by adding a mylar (# 43).
P/N A 4971025 and A of P/N A4971022 are not interchangeable, because the shape of new original guide has been
changed, so that the guide mylar can be stuck horizontally at B .
Old
P/N A4971025
# 43
P/N A4971025
Guide Mylar
New
# 47
P/N A4971022
A
B
A
# 43
P/N A4971024
T. Ito, Manager
Copier Technical Support
Reissued on: February 29, ’92
MODIFICATION BULLETIN NO. 3 Page 5 of 5ISSUED ON: April 30, ’91
MODEL NAME
P.B. D908115/60115/60A497 - 11
SAVIN ARDF for 9520115/60115/60A497 - 153791020306
MODIFICATION BULLETIN NO. 7 Page 1 of 3ISSUED ON: April 15, ’92
ModelARDF for F40Volt/Hz
Modified ArticleFriction Belt
Reason for
To ensure copy quality
Modification
Draw
No.
Old Parts
No.
A4971180A4971163Friction Belt Holder (NASHUA)
A4971182A4971161Friction Belt Holder (Ricoh)
A4971183A4971162Friction Belt Holder (SAVIN)
A4971185A4971164Friction Belt Holder (INFOTEC)
A4971186A4971165Friction Belt Holder (P.B)
A4971170A4971155Friction Belt
New Parts
No.
Description
Date of
Modification
A.B.C.
RankPart No.DescriptionIndex No. Page
Q’ty Used
Old → New
1 → 1
1 → 1
1 → 1
1 → 1
1 → 1
1 → 1
Inter-
change-
ability
X/X33
X/X33
X/Xas a set X/O33
X/X33
X/X33
X/X63
Part needed for replacement by new partParts Catalog
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
Reissued on: May 15, ’92
MODIFICATION BULLETIN NO. 7 Page 2 of 3ISSUED ON: April 15, ’92
DETAILS OF MODIFICATION
To ensure paper positioning of the original at the correct timing, the following p arts have been modified
1. Friction Belt : The shape of the belt has been changed and a mylar has been added to i mprove feeding of the original.
22 mm
Old
2. Friction Belt Holder : Following friction belt modification, the shape of the belt holder has been changed.
26 mm
Old
New
28 mm
New
28 mm
T. Ito, Manager
Copier Technical Support
Reissued on: May 15, ’92
MODIFICATION BULLETIN NO. 7 Page 3 of 3ISSUED ON: April 15, ’92
JAPAN PRODUCTIONRPL PRODUCTION
MODEL NAME
P.B. D908115/60115/60A497 - 11
SAVIN ARDF for 9520115/60115/60A497 - 15379203XXXX
MODIFICATION BULLETIN NO. 8 Page 1 of 3ISSUED ON: April 15, ’92
ModelARDF for F40Volt/Hz
Modified ArticleMain Board
Reason for
To prevent the transfer belt from continuing to rotate, the main board has been modified.
Modification
Draw
No.
Old Parts
No.
A4975150A4975155Main Board
New Parts
No.
Description
Date of
Modification
A.B.C.
RankPart No.DescriptionIndex No. Page
Q’ty Used
Old → New
1 → 1
Inter-
change-
ability
X/O2613
Part needed for replacement by new partParts Catalog
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 8 Page 2 of 3ISSUED ON: April 15, ’92
DETAILS OF MODIFICATION
1. Symptom
The transfer belt of the ARDF does not stop.
2. Cause
Electrical noise (about ± 3V) is generated between the ground line and the +24V line on the PCB during the paper feed mo tor activation.
3. Countermeasure
To minimaize the noise emission, the PCB pattern has been changed.
GND
24V
CPU
GND
24V
GND
CPU
GND
24V
24V
24V
GND
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 8 Page 3 of 3ISSUED ON: April 15, ’92
JAPAN PRODUCTIONRPL PRODUCTION
MODEL NAME
P.B. D908115/60115/60A497 - 11
SAVIN ARDF for 9520115/60115/60A497 - 153792020597
Part needed for replacement by new partParts Catalog
Serial Number
A4971372A4971263Original Table - A4 (Ricoh)
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
1 → 1
X/O163
MODIFICATION BULLETIN NO. 9 Page 2 of 3ISSUED ON: June 30, ’92
DETAILS OF MODIFICATION
The operators often open and close the DF by holding the original table.After about 1000 ∼ 3000 times, A of the original table will break.
To prevent this problem, the material of A has been changed to metal.
A
Old
Metal Plate
New
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 9 Page 3 of 3ISSUED ON: June 30, ’92
JAPAN PRODUCTIONRPL PRODUCTION
MODEL NAME
P.B. D908115/60115/60A497 - 11
SAVIN ARDF for 9520115/60115/60A497 - 153792040817
MODIFICATION BULLETIN NO. 13 Page 1 of 2ISSUED ON: October 15, ’92
ModelARDF for F40, A7, N440Volt/Hz
Mod i fied ArticleOriginal T able
Reason for
To facilitate servicing
Modification
Date of
Modification
The old color’s original table c a nnot sup ply after the modification (MB no. 9) . To facilitate ser vicin g in the field, the o ld color’s
original table with a metal plate has been registered as a service part. The part numbers ar e as follows.
MODIFICATION BULLETIN NO. 13 Page 2 of 2ISSUED ON: October 15, ’92
JAPAN PR ODUCTIONRPL PRODUCTION
MODEL NAME
P.B. D908115/60USA, CanadaA497 - 11
SAV IN ARDF for 9520115/60USA, CanadaA497 - 15
NASHUA RF4050115/60S. AmericaA497 - 16Service Parts Only
RICOH DF56115/60USA, CanadaA497 - 17Service Parts Only
NASHUA RF4050220,240/50Europe etc.A497 - 25Service Parts Only45Service Parts Only
INFOTEC AR DF V220,240/50EuropeA497 - 2646
RICOH DF56220,240/50Europe etc.A497 - 27Service Parts Only47Service Parts Only
SAVIN ARDF
9520/9330/ 9335/9270
NRG RF -3115/60S . AmericaA497 - 56
RICOH DF56115/60USA, CanadaA497 - 57
NRG R F-3220, 240/50Europe etc.A497 - 6585
V/HzDEST INA TION
CODESERIAL NUMBERCODESERIAL NUMBER
115/60USA, CanadaA497 - 55
INFOTEC AR DF VI220, 240/50EuropeA497 - 6686
RICOH DF56220, 240/50Europe etc.A497 - 6787
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 14 PAGE 1 OF 2
Old
Rib
Reissued on: May 15, ’93
Reissued on: November 15, ’92
ISSUED ON: October 15, ’92
ModelARDF for F40, A7, N440Volt/Hz
Modified ArticleSet Sensor Actuator
Reason for
To prevent the set sensor actuator from being damaged.
Modification
Date of
Modification
When clearing a jammed origin al at the fee d-in area, the set sensor actuat or may be damaged. To prevent
this problem, the set sensor act uato r and the bracke t ha ve be en chan ged.
Old P/NNew P/NDescriptionQ’tyInterchangeabilityIndex No.Page
MODIFICATION BULLETIN NO. 15 Page 1 of 2ISSUED ON: October 15, ’92
ModelARDF for F40, A7, N440Volt/Hz
Mod i fied ArticleExit Sensor Bra cket
Reason for
To preve nt the exit sensor from malfunctioning.
Modification
The exit sensor sometimes malfunctions because the positions between the hole on the inverter guide plate and
the exit sensor are not matched. To prevent this pro blem the exit sensor bracket has been changed.
Old P/NNew P/NDescriptionQ’tyInterchangeabilityIndex No.Page
A4972071A4972072Exit Sensor Bracket1 → 1O/X2611
Exit Sensor Bracket
Date of
Modification
Serial Numbe r
inverter guide
plate
Old
11.5
Exit Sensor
16
New
T. Ito, Manager
Copier Technical Support
Reissued on: November 15, ’92
MODIFICATION BULLETIN NO. 15 Page 2 of 2ISSUED ON: October 15, ’92
JAPAN PR ODUCTIONRPL PRODUCTION
MODEL NAME
P.B. D908115/60USA, CanadaA497 - 11
SAV IN ARDF for 9520115/60USA, CanadaA497 - 153792081527
The DF registration senso r is activated by paper dust on the sensor pad, affectin g its colo r. This is becau se, when the
original roller starts rotating, the DF upper plat e is warpe d sligh tly downwa rd. The clearance between the DF
registration senso r and the sensor pad is reduced. To prevent this t he pull-out bracket has been modified to improve
the clearance.
Inter-
Old P/NNew P/NDescriptionQ’ty Used
A4651057A4971052Pull-out Bracket1 → 1X/O35
change-
ability
Parts Catalog
Index No.Page
Serial Number
(Old)
ISSUED ON: April 30, ’93
MODIFICATION BULLETIN NO. 17 PAGE 2 OF 2
JAPAN PRODUCTIONRPL PRODUCTION
MODEL NAME
P.B. D908115/60USA, CanadaA497 - 11
SAVIN ARDF for 9520115/60USA, CanadaA497 - 15Service Parts Only
NASHUA RF4050115/60S. AmericaA497 - 16Service Parts Only
RICOH DF56115/60USA, CanadaA497 - 17Service Parts Only
NASHUA RF4050220,240/50Europe etc.A497 - 25Service Parts Only45
INFOTEC ARDF V220,240/50EuropeA497 - 26Service Parts Only46
RICOH DF56220,240/50Europe etc.A497 - 27Service Parts Only47
SAVIN ARDF
A4971163A4971167Friction Belt Holder (NASHUA)
A4971164A4971168Friction Belt Holder (INFOTEC)
A4971162A4971166Friction Belt Holder (SAVIN)
A4971161A4971159Friction Belt Holder (RICOH)
A4971177Friction Belt Cushion
1 → 1
1 → 1
1 → 1
1 → 1
0 → 1
change-
ability
X/O33
X/O33
X/O33
X/O33
Date of
Modification
Parts Catalog
Index No.Page
* 333
Serial Number
[A]
MODIFICATION BULLETIN NO. 19 PAGE 2 OF 3
[A]
ISSUED ON: January 31, ’94
DETAILS OF MODIFICATION
To ensure original separat ion , th e mat eria l o f the part [A] has been changed from the resin to the rubber.
3
*33
[A]
0 ∼ 0.5
0 ∼ 1
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 19 PAGE 3 OF 3
JAPAN PRODUCTIONRPL PRODUCTION
ISSUED ON: January 31, ’94
MODEL NAME
P.B. D908115/60USA, CanadaA497 - 11
SAVIN ARDF for 9520115/60USA, CanadaA497 - 15Service Parts only
NASHUA RF4050115/60S. AmericaA497 - 16Service Parts only
RICOH DF56115/60USA, CanadaA497 - 17Service Parts only
NASHUA RF4050220,240/50Europe etc.A497 - 25Service Parts only45Service Parts only
INFOTEC ARDF V220,240/50EuropeA497 - 26Service Parts only46Service Parts only
RICOH DF56220,240/50Europe etc.A497 - 27Service Parts only47Service Parts only
SAVIN ARDF