Bin color change
Countermeasue for copy paper damage
New Parts
No.
Description
Date of
Modification
A.B.C. Q’ty Used
Old →
RankPart No.DescriptionIndex No. Page
New
Inter-
change-
ability
Part needed for replacement by new partParts Catalog
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
DETAILS OF MODIFICATION
Details of modifications
* The bin color has been changed from light gray to dark gray to change the appearance of this
sorter/stapler.
* The ribs around the right side of the bins have been changed from sharp to smooth.
This is to prevent the copy paper from being scratched.
MODEL NAMEV/HzDESTINATIONCODESERIAL NUMBER
MODIFICATION BULLETIN NO. 21 Page 2 of 2ISSUED ON: November 15, ’90
MODIFICATION BULLETIN NO. 22 Page 2 of 2ISSUED ON: December 31, ’90
MODEL NAME
P.B. D962115/60USA, CanadaA469-11Service parts only
Savin 7640 Sorter/Finisher115/60USA, CanadaA469-15Service parts only
Nashua SR4965115/60CanadaA469-16Service parts only
Ricoh ST20115/60USA, CanadaA469-17Service parts only
Nashua SR4965220,240/50Europe, etc.A469-25Service parts only
infotec Sorter Stapler 9165220,240/50EuropeA469-26Service parts only
Ricoh ST20220,240/50Europe, etc.A469-27Service parts only
Savin 9710 Sorter/Finisher115/60USA, CanadaA469-55Service parts only
V/HzDESTINATIONCODESERIAL NUMBER
MODIFICATION BULLETIN NO. 23 Page 1 of 2ISSUED ON: Feb. 28, ’91
ModelSorter Stapler for F21 and F22Volt/Hz
Modified ArticleRubber Seal - 1 x 6 x 10mm
Reason for
To improve adhesion
Modification
The rubber seal used in the lower entrance guide plate is being replaced with a cushion. This cushion has
the same function, but it adheres better to the guide plate surface.
Old P/NNew P/NDescriptionQ’tyInterchangeabilityIndex No.Page
A4693113Rubber Seal - 1 x 6 x 10mm
58873246Cushion - Guide Plate
2 → 0
0 → 2
X/O5211
5211
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 23 Page 2 of 2ISSUED ON: Feb. 28, ’91