MODIFICATION BULLETIN NO. 1 PAGE 1 OF 3
ISSUED ON:January 15, ’94
Model J3 Roll Feeder Volt/Hz
Modified Article Parts Catalog
Reason for
Parts catalog correction
Modification
Please correct your parts catalog as follows:
1. P/N correction
Parts Catalog
Incorrect P/N Correct P/N Description
Page Index No.
5 13 A4542592 A4542593 Paper Size Indicator (Hoechst)
3 19 A4545596 A4545586 Reinforcement Plate
2. Not listed
Please add the following part to your parts catalog:
Parts Catalog
P/N Description Draw No.
Page Index No.
Date of
Modification
Serial Number
13 * 27 A4541236 Harness Fixing Plate 1
* New Index
3. Not used
Please delete the following part from your parts cat alog:
Parts Catalog
Page Index No.
13 25 A4541361 Right Lower Rear Cover 1
P/N Description Draw No.
MODIFICATION BULLETIN NO. 1 PAGE 2 OF 3
DETAILS OF MODIFICATION
4. Illustration correction
Please correct the illustratio n of your parts catalog on page 12 (Draw No. 1).
Delete
Harness Fixing Plate
Draw No.1
ISSUED ON:January 15, ’94
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 1 PAGE 3 OF 3
ISSUED ON:January 15, ’94
MODEL NAME
HOECHST ROLL FEEDER
EF3000
REGMA 916 ROLL
FEEDER
RICOH ROLL FEEDER
TYPE 830
K + E 7036RF 115/60 USA, CANADA A454-53
V/Hz DESTINATION CODE SERIAL NUMBER
220,230,240/50 EUROPE A454-41
220,230,240/50 EUROPE A454-42
220, 23,240/50 EUROPE etc. A454-43
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 2
ISSUED ON: December 31, ’94
Model J3 Roll Feeder Volt/Hz
Modified Article Parts Catalog (Ricoh U. S. A. version only)
Reason for
Parts catalog correction
Modification
1. Illustration Correction
Please delete the following illu stra tio n of your parts catalog on page 22.
Date of
Modification
Serial Number
Delete
Page 22
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 2 PAGE 2 OF 2
ISSUED ON: December 31, ’94
MODEL NAME
RICOH ROLL FEEDER
TYPE 830
HOECHST ROLL FEEDER
EF3000
REGMA 916 ROLL
FEEDER
RICOH ROLL FEEDER
TYPE 830
K+ E 7036RF 115/60 USA, CANADA A454-53
V/Hz DESTINATION CODE SERIAL NUMBER
115/60 USA, CANADA A454-17
220,230,240/50 EUROPE A454-41
220,230,240/50 EUROPE A454-42
220, 23,240/50 EUROPE etc. A454-43
MODIFICATION BULLETIN NO. 3 PAGE 1 OF 2
ISSUED ON: January 15, ’95
Model J3 Roll Feeder Volt/Hz
Modified Article Parts Catalog (K+E only)
Reason for
Parts Catalog Correction
Modification
Parts Number Correction
Please correct your parts catalo g as follows:
Inter-
Incorrect P/N Correct P/N Description Q’ty Used
A4542702 A4542704 Paper Spool Unit
1 → 1
change-
ability
X/O * 7
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 3 PAGE 2 OF 2
ISSUED ON: January 15, ’95
MODEL NAME
RICOH ROLL FEEDER
TYPE 830
HOECHST ROLL FEEDER
EF3000
REGMA 916 ROLL
FEEDER
RICOH ROLL FEEDER
TYPE 830
K+ E 7036RF 115/60 USA, CANADA A454-53
V/Hz DESTINATION CODE SERIAL NUMBER
115/60 USA, CANADA A454-17
220,230,240/50 EUROPE A454-41
220,230,240/50 EUROPE A454-42
220, 23,240/50 EUROPE etc. A454-43
MODIFICATION BULLETIN NO. 4 PAGE 1 OF 1
ISSUED ON: September 15, ’95
Model J3 Roll Futter Volt/Hz
Modified Article Parts Catalog No serial number cut-in information
Reason for
Parts Catalog lCorrection
Modification
Parts Catalog
Incorrect P/N Correct P/N Description
Index No. Page
A454-2548 A454-3548 Base Plate - Paper Feed 30 5
Date of
Modification
Serial Number
M. Iwasa, Manager
Technical Support Department
ISSUED ON: November 30, ’95
MODIFICATION BULLETIN NO. 5 PAGE 1 OF 1
Model J3 Roll feeder Volt/Hz
Modified Article Parts Catalog No serial number cut-in information.
Reason for
Parts Catalog Correction.
Modification
Date of
Modification
Serial Number
The part number for the Base Plate - Paper Feed of the A454-17, -53 mode ls is missing from the parts cat alo g.
Please add the part number A454-3 54 8 to your pa rts cat alog.
Old P/N New P/N Description Q’ty Used
A4543548 Base Plate - Paper Feed
1 → 1
Inter-
change-
ability
—30 5
Index No. Page
Parts Catalog
( A454-17, -53 only)
M. Iwasa, Manager
Technical Support Department
Loading...