Ricoh A414 Modification Bulletin CS2070
Model Mini Sorter for F24/F90/F85/F12/F23/F25/F13 Volt/Hz
Date of
Modification
Serial Number
Modified Article Upper Guide Plate and Guide Plate Arm (European version only)
Reason for
Modification
Due to parts standardization
T.Ito, Manager
Copier Technical Support
Page Index Old P/N New P/N Description
3 15 68032272 Arm - Upper Guide Plate
3 15 A4232272 Guide Plate Arm
3 42 68032151 A4232115 Upper Guide Plate
Due to parts standardization, the following parts have been changed. The interchangeability is O/O.
MODIFICATION BULLETIN NO. 8 Page 1 of 2 ISSUED ON: Oct. 31, ’90
MODEL NAME V/Hz DESTINATION
JAPAN PRODUCTION REI PRODUCTION
CODE SERIAL NUMBER CODE SERIAL NUMBER
RICOH CS2070 115/60 USA, CANADA A414 -17 A414 - 06
KALLE
SORTER 20/26/32/40
220/50 EUROPE A414 -26
RICOH CS2070
220,240/50
EUROPE etc. A414 -27
MODIFICATION BULLETIN NO. 8 Page 2 of 2 ISSUED ON: Oct. 31, ’90
Model Mini Sorter for F24/F90/F85/F12/F23/F25/F13 (European Version only ) Volt/Hz
Date of
Modification
Serial Number
Modified Article Base Plate
Reason for
Modification
To improve reliability and durability
Draw
No.
Old Parts
No.
New Parts
No.
Description
A.B.C.
Q’ty Used
Old → New
Inter-
change-
ability
Part needed for replacement by new part Parts Catalog
Rank Part No. Description Index No. Page
68031136 A4231126 Base Plate (Infotec) 1 → 1 O/O 29 3
A4141131 A4231128 Base Plate (Ricoh) 1 → 1 O/O 29 3
A4231144 Base Roller 0 → 2 * 62 3
A4231143 Base Shaft 0 → 2 * New Index * 61 3
03140060W Philips Pan Head Screw-M4 x 6 n → n+4 102 3
07200040E Retaining Ring-M4 n → n+2 115 3
A4231145 Receive Plate 0 → 1 * 63 3
68031115 A4231127 Bin Guide 2 → 2 O/O 55 3
68032311 A4232311 Guide Plate 1 → 1 O/O 26 3
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 9 Page 1 of 3 ISSUED ON: April 15, ’91
To improve reliability and durability, the production machines of the European
versions have been modified as follows:
1. To add the receive plate in order to ensure that this sorter stands steadily
when the sorter is undocked from the copier, and put on the floor.
(Figure 1)
2. To add the base roller and base shaft in order to reduce the friction between
the base plate and lowest bin. (Figure 2)
3. To change the material of the bin guide and guide plate.
DETAILS OF MODIFICATION
T. Ito, Manager
Copier Technical Support
Figure 1
* 63
Receive Plate
Figure 2
115
* 62
* 61
102
102
* 62
Base Roller
* 61
Base Shaft
115
* New Index
MODIFICATION BULLETIN NO. 9 Page 2 of 3 ISSUED ON: April 15, ’91
Loading...